• Nuclear Engineering and Technology
• /
• 제16권2호
• /
• pp.80-88
• /
• 1984

Thriethylenediamine(TEDA)주입 활성탄층에 의한 공기중의 methyliodide 제거 메카니즘이 조사되었다. 실험 결과, 공기 유속이 20cm/sec 이상일 때는 기공확산이 율속 단계였으며, 10cm/sec 일때는 기공확산 저항과 외부 물질 전달 저항이 모두 총괄 물질 전달 저항에 기여하였다. 공기중 수증기가 존재하지 않는 건조 조건하에서의 TEDA 함침 탄소층의 성능을 묘사하기 위한 흡착 모델이 제안되었다. 계산된 값은 실험 결과와 잘 일치하였다.

• 한국연소학회지
• /
• 제21권4호
• /
• pp.6-15
• /
• 2016

The oxygen fuel MILD (Moderate or Intense Low-oxygen Dilution) combustion has been considered as one of the promising combustion technology for flame stability, high thermal efficiency, low emissions and improved productivity. In this paper, the effect of oxygen and fuel injection condition on formation of MILD combustion was analyzed using lab scale oxygen fuel MILD combustion furnace. The results show that the flame mode was changed from a diffusion flame mode to a split flame mode via a MILD combustion flame mode with increasing the oxygen flow rate. A high degree of temperature uniformity was achieved using optimized combination of fuel and oxygen injection configuration without the need for external oxygen preheating. In particular, the MILD combustion flame was found to be very stable and constant flame temperature region at 7 KW heating rate and oxygen flow rate 75-80 l/min.

• 천문학회지
• /
• 제37권5호
• /
• pp.601-603
• /
• 2004

We present the results of the linear analysis for the Parker-Jeans instability in the magnetized gas disks including the effect of cosmic-ray diffusion along the magnetic field lines. We adopted an uni-formly rotating two temperature layered disk with a horizontal magnetic fields and solved the perturbed equations numerically. Fragmentation of gases takes place and filamentary structures are formed by the growth of the instability. Nagai et al. (1998) showed that the direction of filaments being formed by the Parker-Jeans instability depends on the strength of pressure outside the unperturbed gas disk. We found that at some range of external pressures the direction of filaments is also governed by the value of the diffusion coefficient of CR along the magnetic field lines k.

• 경영과학
• /
• 제15권2호
• /
• pp.211-227
• /
• 1998

The process of implementing risk management systems for the organizations in financial service industry can be viewed as a diffusion of innovation since the introduction of the risk management systems changes the decision making process on risks faced by the organizations. The purpose of the reported research is to examine the factors that affect the successful implementation of ALM(asset & liability management) systems, the risk management systems managing interest rate risk. Specifically, this paper presents an investigation of three factors from the diffusion of innovation studies; internal factors, external factors, and time. A field survey was conducted for Korean banks that have implemented ALM systems. The results suggest that the perceived uncertainty of market, system supports, and management supports be most significantly related to the successful implementation of the risk management systems. The findings of the current study also suggest a certain amount of time should be passed to diffuse the risk management systems in organizations.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.236-236
• /
• 2010

P-type의 단결정, 다결정, UMG 기판을 이용하여 phosphorus툴 확산시킨 후 열처리한 external gettering 방식으로 실리콘 내부에 있는 불순물을 제거하였고, 기판의 lifetime 변화를 $\mu$-PCD를 이용하여 측정하였다. phosphorus를 $850^{\circ}C$에서 기판 내부로 20분 확산시킨 후 기판의 온도와 시간을 변화시키면서 gettering 공정을 시행하였다. 에미터층으로 인해 기판의 bulk lifetime이 부정확해 지는 것을 방지하기 위해서 NaOH를 이용하여 에미터층을 제거한 후 $\mu$-PCD를 이용하여 lifetime을 측정하였다. 또한 기판의 표면효과를 최소화하기 위해서 lifetime 측정전에 iodine을 이용하여 표면 passivation을 하였다.

• KCI Concrete Journal
• /
• 제11권3호
• /
• pp.175-180
• /
• 1999

In order to predict the onset of the corrosion of steel bars in concrete, a mathematical model was presented to observe the diffusion of chloride ion in aqueous phase, the adsorption and desorption of chloride ions to and from the surface of solid phase of concrete, and the chemical reaction or chloride ions with solid phase. The finite element method was employed to carry out the numerical analysis. The chlorides enetrating through the wall of the concrete structure from the external environment and the chlorides contained in the concrete admixture were confirmed to be two important factors to determine the onset of the corrosion of steel bars.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2011년도 춘계학술발표대회
• /
• pp.43.2-43.2
• /
• 2011

Minority Carrier recombination should be suppressed for high efficiency solar cells. However, impurities in the silicon bulk region deteriorate the minority carrier lifetimes, causes conversion efficiency drop. In this study, we introduced phosphorus external gettering for silicon heterojunction solar cell substrates. Gettering was undergone at 750, 800, 850 and $900^{\circ}C$ in furnace for 30 minutes. Bulk lifetimes and calculated diffusion length were improved. We applied phosphorus gettering to silicon heterojunction solar cells. Gettered group and ungettered group were used as substrate of silicon heterojunction solar cells. After fabrication, characteristics of solar cells were analyzed. The results were observed to see the enhancement of substrate quality which directly connects with solar cell properties.

• 한국수소및신에너지학회논문집
• /
• 제16권4호
• /
• pp.324-333
• /
• 2005

The kinetics of external hydrogen embrittlememt is considered. The equation of the crack growth rate (CGR) is derived from modification of the model developed by Wilkinson and Vitek. After calculation of hydrogen pressure build-up in the void, the effect of the internal hydrogen pressure on the void growth is added. The CGR is expressed by two terms. One is the term dependent on the critical stress, which is exactly same as Wilkinson and Vitek. The other is term dependent on the pressure of the hydrogen in void.

• 대한약학회:학술대회논문집
• /
• 대한약학회 2003년도 Proceedings of the Convention of the Pharmaceutical Society of Korea Vol.1
• /
• pp.296.1-296.1
• /
• 2003

Purpose. External gel formulations of prostaglandin E1 ethyl ester (PGE1-EE), a prod rug of PGE1 as a therapeutic agent for erectile dysfunction, were tried and evaluated by in vitro skin penetration characteristics and in vivo pharmacodynamic effects in cat. Method. The in vitro skin penetration was performed with Franz diffusion cell and examined in aspects of alcohol/polyol ratios and various enhancers. (omitted)

• 터널과지하공간
• /
• 제25권1호
• /
• pp.46-55
• /
• 2015

발파분진을 제어하기 위하여 도폭선을 결합한 양수튜브를 고안하였다. 최적설계를 위한 실험의 일환으로 도폭선 기폭위치에 따른 물의 확산을 비교 실험하였다. 실험결과를 평가하기 위하여 고속카메라로 촬영하여 영상을 이미지 분석 하였고, 워터튜브의 분무확산 과정을 묘사하기 위해 AUTODYN 프로그램을 이용하여 해석한 결과를 분무초기거동 실험영상과 비교하였다. 외부기폭의 경우 분무거동이 교차유동을 나타냈고, 내부기폭의 경우 방사형 전파유동을 나타냈다. 수치해석 결과 워터튜브 내부기폭의 경우 수중폭발에서와 같은 내부 Bubble Ring이 발생하였고, 지반에의 반사압 영향에 의해 추가적인 Bubble Ring이 형성되었다. 또한, 워터튜브의 분무미립화 성능을 Weber 수를 통해 평가하였고, 워터튜브의 충분한 미립화 성능을 확인할 수 있었다.