• 한국자동차공학회논문집
• /
• 제8권6호
• /
• pp.230-237
• /
• 2000

The wheel bearing in vehicles has been improved to unit module by joining a bearing to a hub in order to achieve weight reduction and easy assembly. Currently, the contact force between a raceway and balls of a bearing is applied as the external force in order to analyse the structure of the unit type bearings. In this paper, simplified boundary conditions are discussed for structure analysis of wheel bearing unit. From the procedure, the contact conditions of balls and race in wheel bearing unit are considered as equivalent non-linear spring elements. The end node of a spring element is constrained in displacement. And the external force of boundary conditions is applied at the contact point between tire and road. For the evaluation of this analysis, its results for the force of spring elements are compared with contact forces of calculated results. and also maximum equivalent stresses of analysis are compared with results of test at the flange of inner ring. The analysis results with proposed boundary conditions are more accurate than results from analysis which is generally used.

• 한국해양공학회지
• /
• 제38권2호
• /
• pp.53-63
• /
• 2024

Submerged breakwaters can be installed underneath floating structures to reduce the external wave loads acting on the structure. The objective of this study was to establish an optimization analysis framework to determine the corresponding shape and position of the submerged breakwater that can minimize or maximize the external forces acting on the floating structure. A two-dimensional frequency-domain boundary element method (FD-BEM) based on the linear potential theory was developed to perform the hydrodynamic analysis. A metaheuristic algorithm, the advanced particle swarm optimization, was newly coupled to the FD-BEM to perform the optimization analysis. The optimization analysis process was performed by calling FD-BEM for each generation, performing a numerical analysis of the design variables of each particle, and updating the design variables using the collected results. The results of the optimization analysis showed that the height of the submerged breakwater has a significant effect on the surface piercing body and that there is a specific area and position with an optimal value. In this study, the optimal values of the shape and position of a single submerged breakwater were determined and analyzed so that the external force acting on a surface piercing body was minimum or maximum.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1987년도 한국자동제어학술회의논문집(한일합동학술편); 한국과학기술대학, 충남; 16-17 Oct. 1987
• /
• pp.780-785
• /
• 1987

The measuring point data of clay model are widely used to design parts whose external features are important design factor such as automobiles and general die products. This paper presents a method for improving the process to generate smooth surfaces from the measuring point data using turnkey CAD/CAM system. The process of smooth-surface generation involves several steps: styline finding, curve fairing, surface generation and filleting. The process is improved by automatic curve fairing, local correction of surface and multi-boundary surface treatment. An automobile bumper and a telephone receiver are measured and modeled to test the new method. Significant time saving is resulted by changing interactive mode to automatic mode and eliminating inefficient loop of surface generation process.

• International Journal of Aeronautical and Space Sciences
• /
• 제13권2호
• /
• pp.127-153
• /
• 2012

This paper presents an advanced computational method for the prediction of the responses in the frequency domain of general linear dissipative structural-acoustic and fluid-structure systems, in the low-and medium-frequency domains and this includes uncertainty quantification. The system under consideration is constituted of a deformable dissipative structure that is coupled with an internal dissipative acoustic fluid. This includes wall acoustic impedances and it is surrounded by an infinite acoustic fluid. The system is submitted to given internal and external acoustic sources and to the prescribed mechanical forces. An efficient reduced-order computational model is constructed by using a finite element discretization for the structure and an internal acoustic fluid. The external acoustic fluid is treated by using an appropriate boundary element method in the frequency domain. All the required modeling aspects for the analysis of the medium-frequency domain have been introduced namely, a viscoelastic behavior for the structure, an appropriate dissipative model for the internal acoustic fluid that includes wall acoustic impedance and a model of uncertainty in particular for the modeling errors. This advanced computational formulation, corresponding to new extensions and complements with respect to the state-of-the-art are well adapted for the development of a new generation of software, in particular for parallel computers.

• 한국소음진동공학회논문집
• /
• 제21권5호
• /
• pp.430-436
• /
• 2011

The purpose of this study is to analyze the vibration and sound generation characteristics of the sandwich panel. Two thick panels were assumed to be separated by a compliant viscoelastic core. The transverse vibration induced by an external impact was analyzed using the Rayleigh-Ritz method. For applying arbitrary boundary condition of the panels, the edges were assumed to be supported by the translational and rotational springs. The beam functions were used as the trial functions. The effect of the boundary condition and viscoelastic core on the resulting vibration characteristics was investigated. The radiated sound power was analyzed using the proposed numerical model and the Rayleigh integral. The dynamic properties of the core and the mass-stiffness-mass resonance frequency had significant influence on the impact sound.

• International Journal of Advanced Culture Technology
• /
• 제6권4호
• /
• pp.317-322
• /
• 2018

We use edge detection technique for the input image to extract the entire edges of the object in the image and then select only the edges that construct the outline of the object. By examining the positional relation between these pixels composing the outline, a simplified version of the outline of the object in the input image is generated by removing unnecessary pixels while maintaining the condition of connection of the outline. For each pixel constituting the outline, its direction is calculated by examining the positional relation with the next pixel. Then, we group the consecutive pixels with same direction into one and then change them to a line segment instead of a point. Among those line segments composing the outline of the object, a line segment whose length is smaller than a predefined minimum length of acceptable line segment is removed by merging it into one of the adjacent line segments. As a result, an outline composed of line segments of over a certain length is obtained through this process.

• 한국실내디자인학회논문집
• /
• 제17권3호
• /
• pp.86-93
• /
• 2008

The purpose of this study is to find out how the otherness philosophy reveals itself in the principle of F.O.A construction space creation. The traditional philosophy of totality is self-centered and thoughts are based on the subject. It couldn't escape from the world associated with the self, and has subordinated the other to the main body. But the philosophy of otherness transcends the subject, to the open, creative way of thinking which acknowledges deconstruction, decentralization, and non-hierarchy. This is very similar to contemporary architecture, which pursuits change, and also to the current state of society. In construction by the construction group F.O.A, which is doing notable activity this generation, there is an attempt to transcend the fixed subject which is seen in the otherness discussion, and realize recategorization by overcoming the boundaries of subject and object. First, by the realization of landscape architecture using a topographical folding technique, boundaries of the subject and object are demolished in the relationship of the landscape construction, and recategorization. Second, by breaking up the meaning of the surface which is a visual and physical boundary for both the internal and external, recategorization is being done. Third, by making the boundary between the interior and exterior indistinct, cognitive threshold is dissolved, and the relationship between the subject and object is being recategorization. In conclusion, we can see that the many recategorization phenomenons that are happening in the F.O.A construction show the otherness that escapes from the conventional and stationary relationship, and recognizes each other at the same time, forming new relationships.

• Asian Journal of Innovation and Policy
• /
• 제7권2호
• /
• pp.235-286
• /
• 2018

The aim of paper is to develop an alternative framework for the study of technological innovation systems. In contrast with conventional literature, this analytical framework is designed for entrepreneurs, i.e. actors, at the micro level rather than policy-makers at the meso or macro level. Herein, the entrepreneurial innovation system is conceptually refined by synthesizing knowledge regarding technological innovation and innovation systems. Drawing upon the intrinsic technological identity essential for innovation, the entrepreneurial innovation system is shown to involve three core changes in terms of technology, organization and market, and their couplings within its internal boundary over time. This analytical framework also takes into account the fact that the innovation system is influenced by and copes with the external environment during its evolution. Moreover, the framework of the entrepreneurial innovation system considers the recent trend of sustainable development. The technical and socio-economic characteristics of a nuclear powersystem are studied empirically to articulate an analytical framework that should be very useful for technological innovation in other energy systems by reflecting their unique features.

• 전기학회논문지P
• /
• 제65권1호
• /
• pp.31-40
• /
• 2016

The purpose of this study is to dimensionally examine the factors of policy changes by applying the ACMS model to KEPCO's structural reorganization privatization policies and study its implications. As a result of the analysis, among the external variables that affect as a financial source or restriction to advocates, all areas except for the difference in opinion of the people as well as policy decision and effects of other subordinate systems were shown to be in an advantageous condition acting as a financial source to advocates of structural reorganization privatization. On the other hand, advocates affected by the external variables share a certain belief system in which the advocates of privatization share the justification of profitability while the advocates of collectivization share the justification of publicness. In these flows, the announcement of the privatization plan of public enterprises of the committee of planning and budgeting acts as a matter of contact which opens the windows for policy changes, and this window goes through ignition, explosion, and fixation which causes fierce interactions among advocates of both sides. Eventually, in accordance with the contents of excluding electricity(KEPCO) from the list for privatization the window for policy changes has closed and things have changed to a transitional KEPCO privatization policy. Based on this, the first implication is that non-official participants such as the people, social organizations, labor unions, etc. influence policy changes more than they did before. Secondly, in the process of policy changes, there is an order of boundary even in the fierce interactions between each advocate. Thirdly, specific variables can play various roles in complex policy phenomenon. Fourthly, a logical analysis using the ACMS model is possible in Korea as well. Fifthly, as a result of analyzing the change process of the KEPCO structural reorganization privatization policy through the ACMS model, not all matched with the main research results implied by the ACMS model.

• 한국전산구조공학회논문집
• /
• 제27권4호
• /
• pp.239-245
• /
• 2014

강화재의 복잡한 배열로 인하여 복합재 구조에 대한 유한요소 모델링은 상당히 까다로운 문제가 될 수 있다. 본 논문에서는 복합재 구조에 대하여 효율적으로 주기 격자망을 생성시킬 수 있는 기법을 제안한다. 먼저 육면체 유한요소로 구성된 규칙적인 격자망을 준비하고, 이를 복합재 내의 강화재에 대한 표면 정보에 맞추어 깎아낸다. 강화재와 기지재 사이에서 깎여진 육면체 유한요소는 임의의 절점과 면을 가질 수 있는 다면체 유한요소에 해당한다. 일관된 알고리즘을 이용하여 육면체 유한요소를 깎아내기 때문에 강화재와 기지재 사이의 요소는 자동적으로 적합한 형태로 구성된다. 또한 대표체적영역 내에서 강화재의 주기성을 추가적으로 고려하면, 대표체적영역에 대한 각각의 주기 경계 쌍에서 절점과 요소의 형태가 모두 일치하는 주기 격자망을 효율적으로 생성시킬 수 있다. 그러므로 별도의 처리 없이 대표체적영역에 주기 경계조건을 부여할 수 있다. 수치예제에서는 본 논문에서 제안한 기법의 효용성을 검증한다.