• Nuclear Engineering and Technology
• /
• v.36 no.4
• /
• pp.327-337
• /
• 2004

It is commonly required that tubes with defects exceeding $40\%$ of wall thickness in depth should be plugged; however, this criterion is too conservative for some locations and for some types of defects. Many studies have been done with the aim of developing an alternative plugging criteria, and these studies have shown that steam generator tubes with a certain range of axial through-wall cracks could remain in service without any safety or reliability problems. However, these studies have been limited, thus far, to consideration of single cracked tubes, necessitating a study on multiple cracks, which are commonly found. A crack coalescence model applicable to steam generator tubes with two collinear axial through-wall cracks was proposed in the previous study. In this paper, the investigation is extended to the parallel axial cracks spaced in a circumferential direction, because parallel axial cracks are more frequently detected during in-service inspections than collinear axial cracks. Interaction effects between two parallel cracks are evaluated by performing elastic and elastic-plastic finite element analyses.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.8 no.1
• /
• pp.88-98
• /
• 1996

The present study is concerned with the flow friction and heat transfer characteristics of the combination of various regenerator materials, using the different Darcy number and porosity, which is filled uniformly and partially in a tube under oscillating flow condition. The poros medium is adopted as Brinkmann-Forschheimer extended Darcy model. Numerical results are obtained or the flow and temperature fields and described the effect of the combination of various regenerator materials and Womersley number on the pressure drop, the heat transfer and the regenerator efficiency. The results obtained indicate that not only heat transfer between the tube wall and oscillating flow but also the pressure drop at both ends of the regenerator are increased, while the regenerator efficiency is decreased in the increase of womersley number. It is also found that the friction factor is increased as Reynolds number is increased. The comparison between the combination of the various regenerator materials and the homogeneous regenerator material shows that the regenerator efficiency can be enhanced with the proper combination of various regenerator materials even though the averaged porosity of the regenerator is same.

• Journal of Plant Biology
• /
• v.9 no.1_2
• /
• pp.17-21
• /
• 1966

The mutual relationships of boron, Ca and sucrose were studied in relation to in vitro pollen growth and pollen bursting, by using conventient pollen from Crinum asiaticum for experiment. Crinum pollen are paticularly sensitive to Ca. Addition of very small amount of boron to cultural media was apparently synergistic to the action of sucrose and Ca in pollen germination and tube elongation. This action was extended to a higher level of boron concentraton. Combined application of boron, Ca and sucrose always gave the better results in pollen growth and protection against pollen bursting much more than when used singly. This indicated that there is a direct relationship between better growth of pollen and increased rigidity of pollen cell wall. A higher level of Ca concentration tended to increase bursting rate of pollen grains and decrease that of pollen tubes, while boron always depressed the rate of bursting. This was considered due to increased failure in pollen germination at high level of Ca that favors pollen tube elongation. The fact that Ca show an antagonistic effect on the suppressive action of high level of boron in pollen growth and shows different effect in response to pollen bursting from boron, suggested mode of Ca and boron action in the presence of sucrose is quiate different, although to increase in rigidity of pollen cell wall by them is in common nature. It was postulated therefore that Ca acts on pectins of pollen cell wall largely as "non-metabolic" and boron as "metabolic" promoter is pollen growth and protecting pollen bursting, since boron and Ca have common nature in strengthening the pollen cell wall but act differently.but act differently.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.14 no.5
• /
• pp.93-99
• /
• 2006

Flexible couplers are widely used for exhaust transmitted vibration reduction in vehicles. This paper describes an investigation into the acoustical characteristics of exhaust flexible coupler by the simulation and testing. Computational acoustic simulation is carrying out to investigate resonance frequency and transmission loss of decoupler using the boundary element method and transfer matrix approach. To confirm the acoustical simulation results of exhaust decoupler, we compare with measured experimental results by the test of transmission loss measurement system. In the comparison with simulation results and tests results, there is correctly fit the resonance frequency and the trend of transmission loss. Also, we show that the acoustical structure of decoupler is analogous to the expended tube or side branch resonator. The characteristics of exhaust decoupler have a marked increase in the acoustic attenuation at the specified frequency bend. Therefore the decoupler is applied to develop the exhaust system not only for the vibration isolator but also for the noise attenuator.

• Steel and Composite Structures
• /
• v.25 no.6
• /
• pp.649-661
• /
• 2017

This paper is motivated by the lack of studies in the technical literature concerning to the influence of carbon nanotubes (CNTs) waviness and aspect ratio on the vibrational behavior of functionally graded nanocomposite annular sector plates resting on two-parameter elastic foundations. The carbon nanotube-reinforced (CNTR) plate has smooth variation of CNT fraction based on the power-law distribution in the thickness direction, and the material properties are also estimated by the extended rule of mixture. In this study, the classical theory concerning the mechanical efficiency of a matrix embedding finite length fibers has been modified by introducing the tube-to-tube random contact, which explicitly accounts for the progressive reduction of the tubes' effective aspect ratio as the filler content increases. Parametric studies are carried out to highlight the influence of CNTs volume fraction, waviness and aspect ratio, boundary conditions and elastic foundation on vibrational behavior of FG-CNT thick sectorial plates. The study is carried out based on three-dimensional theory of elasticity and in contrary to two-dimensional theories, such as classical, the first- and the higher-order shear deformation plate theories, this approach does not neglect transverse normal deformations. The annular sector plate is assumed to be simply supported in the radial edges while any arbitrary boundary conditions are applied to the other two circular edges including simply supported, clamped and free. For an overall comprehension on 3-D vibration of annular sector plates, some mode shape contour plots are reported in this research work.

• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.5
• /
• pp.126-135
• /
• 1995

An exhaust muffler is one of the simple and effective means to meet the demand for a quiet vehicle, and it deserves a close attention to effectively reduce the engine noise. The transfer function technique is one of the tools that have been used to analyze the noise characteristics of the exhaust muffler. In this paper we obtained a transfer function using the forward-going and backward-going components of sound pressure in the exhaust muffler, which is compatible wiht lattice filter algorithm. This form of transfer function is obtained for the basic elements of a muffler, such as uniform tube, open termin- ation, closed termination, anechoic termination, expansion, contraction, extended-tube resonator, hole, Helmholtz resonator, and concentric hole-cavity resonator. The results are combined to produce the transfer function of various types of mufflers. With this transfer function we calculate the transmission and insertion losses of mufflers, and examined the effects of various design parameters. Comparisons were made between the calculation and experimental results, which showed a good agreement, and we conclude that the transfer function of lattice form can be used to analyze the noise characteristics of the exhaust mufflers.

• Journal of Chest Surgery
• /
• v.21 no.5
• /
• pp.856-862
• /
• 1988

The survival rate after resectional operation for carcinoma of the esophagus is still very low and many factors contribute to these poor results. We analyze the clinical results of 56 operated patients among 62 esophageal cancer patients between March, 1974 and July, 1988. Among the 62 patients, 52 patients were squamous cell carcinoma and 8 were adenocarcinoma, one was leiomyosarcoma and one was adenosquamous cell carcinoma. The classification of esophageal cancer was based on TNM classification of American Joint Committee on cancer". Among the operated patients, stage I was 5[9.6%], stage II was 13[25%], stage III was 26[50%], stage IV was 8[15.4%]. And its one year survival rate was 80%, 69%, 11.5%, 0% for each stages. The rate of resectability was 30.3% and resection of esophagus with esophagogastrostomy and extended lymph node dissection was performed on 17 patients without distant metastasis or adjacent organ invasion. Substernal esophago-colono-gastrostomy, Celestine tube insertion and feeding gastrostomy was performed on remained 39 patients. The analysis of postoperative survival duration revealed the superiority of esophagectomy with extended lymph node dissection over other palliative operation. [1 year survival rate: 79% versus 21%] We concluded that the survival rate of esophageal resection with lymph node dissection group was superior to nonresective palliative operation group. And transthoracic approach was superior to extrathoracic approach in involved lymph node dissection and esophageal resection in locally invaded cases.ases.

• Steel and Composite Structures
• /
• v.20 no.4
• /
• pp.731-748
• /
• 2016

Pile-to-pilecap connection performance is important as Integral abutment bridges (IABs) have no expansion joints and their flexible weak-axis oriented supporting piles take the role of the expansion joint. This connection may govern the bridge strength and the performance against various lateral loads. The intention of this study is to identify crack propagation patterns when the pile-to-pilecap connection is subjected to lateral loadings and to propose novel connections for improved performance under lateral loadings. In this study, eight different types of connections were developed and modeled, using Abaqus 6.12 to evaluate performances. Three types were developed by strengthening the connections using rebar or steel tube: (i) PennDOT specification; (ii) Spiral rebar; and (iii) HSS tube. Other types were developed by softening the connections using shape modifications: (i) cylindrical hole; (ii) reduced flange; (iii) removed flange; (iv) extended hole; and (v) slot hole connection types. The connections using the PennDOT specification, HSS tube, and cylindrical hole were shown to be ineffective in the prevention of cracks, resulting in lower structural capacities under the lateral load compared to other types. The other developed connections successfully delayed or arrested the concrete crack initiations and propagations. Among the successful connection types, the spiral rebar connection allowed a relatively larger reaction force, which can damage the superstructure of the IABs. Other softened connections performed better in terms of minimized reaction forces and crack prevention.

• The Korean Journal of Ecology
• /
• v.25 no.6
• /
• pp.389-393
• /
• 2002

Effects of environmental factors on in vitro pine pollen performance were investigated. Pinus densiflora and P. rigida pollen grains collected at Mt. Kwanak, Korea were used. Three environmental factors, such as pollen storage temperature, pollen culture temperature and nutrient condition in medium, were tested. To determine the storage temperature effects on pollen viability, pine pollen was stored at $-70^{\circ}C$, $-12^{\circ}C$, $4^{\circ}C$ and $22^{\circ}C$. Pollen viability was substantially extended at the storage temperatures of $-12^{\circ}C$ and $4^{\circ}C$ for more than 300 days. To elucidate the culture temperature effects on pine pollen germination and tube growth, pollen grains were cultured at the temperatures from $5^{\circ}C$ to $40^{\circ}C$ at $5^{\circ}C$intervals. The germination rate and tube growth were highest at $25^{\circ}C$ and decreased above $30^{\circ}C$. To investigate boron and sucrose effects on pollen tube growth, the pollen was cultured at different sucrose and boric acid concentrations. Germination rate was optimal in germination medium containing 3 or 5$\%$ sucrose with 0.01 $\%$ boric acid. These results indicate that the pine pollen can be stored for considerable length of time without noticeable loss of viability at storage temperature below or near $0^{\circ}C$. Optimal germination medium conditions were established for pine pollen. Therefore, pine pollen can be used for many biological and environmental monitoring researches.

• The Plant Pathology Journal
• /
• v.32 no.1
• /
• pp.1-7
• /
• 2016

Responses of Botryosphaeria dothidea to interrupted wetness periods were investigated under in vivo and in vitro conditions. Conidia of B. dothidea were allowed to germinate on apple fruits under wetting condition at $25^{\circ}C$ for 5 hr. They were air-dried for 0, 1, 2 or 4 hr, and then rewetted at $25^{\circ}C$ for 5 hr. Following an initial wetness period of 5 hr, 83% of the conidia germinated. The percent conidial germination increased to 96% when wetting was extended continuously another 5 hr. However, no further conidial germination was observed when wetting was interrupted by dry periods of 1, 2 and 4 hr, resulting in 83, 81 and 82%, respectively. The mean length of the germ tubes was $37{\mu}m$ after 5 hr of wetting and elongated to $157{\mu}m$ after 10 hr of continuous wetting. On the other hand, interruption of wetting by a dry period of 1 hr or longer after the 5 hr of initial wetting arrested the germ tube elongation at approximately $42{\mu}m$ long. Prolonged rewetting up to 40 hr did not restore germ tube elongation on slide glasses under substrate treatments. Model simulation using weather data sets revealed that ending infection periods by a dry period of at least 1 hr decreased the daily infection periods, avoiding the overestimation of infection warning. This information can be incorporated into infection models for scheduling fungicide sprays to control apple white rot with fewer fungicide applications.