• Journal of Radiation Protection and Research
• /
• v.9 no.1
• /
• pp.26-32
• /
• 1984

The exposure doses by the radioactive gaseous effluents from nuclear power plants are investigated in the two cases of normal operation and hypothetical accident. Gaussian equation is adapted in the normal operation as the diffusion model of effluents for long period, which uses annual average meteorological data. But the real time models have been used in the case of accidents which analyze the changes of wind direction and speed. In this study the annual exposure doses by the normal operation of Kori unit 1 during $1977{\sim}1982$ were calculated on the basis of the atmospheric diffusion factor by the Gaussian straight line model. And the image processing technique was suggested as the effective method through the wind tunnel experiments to get the characteristic value of atmospheric diffusion coefficient required especially in the accidents of nuclear power plants.

• Journal of Korea Multimedia Society
• /
• v.12 no.5
• /
• pp.699-707
• /
• 2009

Recently, while 3D sports game increases, the research that it recognizes the operation of the real user actively progresses. Most of all, the research about the golf is active. In this paper, the camera acquiring in a high-speed multi-exposure image measures the flight data of the golf ball through the image processing. While photographing, the high-speed camera, using this system, exposes an image at regular intervals. And line scan camera checks whether the golf ball passed or not. After the location information of the calculated golf ball calculates a speed and a direction by using the physical formula, it applies the golf simulation. After, this system is possible the measurement of the physical element of the spherical object.

• Journal of Sensor Science and Technology
• /
• v.6 no.6
• /
• pp.445-450
• /
• 1997

An ammonia gas sensor with high sensitivity using thick-film technology were fabricated and examined. The material for sensing the ammonia gas was the mixture of oxide semiconductor, $FeO_{x}-WO_{3}-SnO_{2}$. The sensor exhibits resistance increase upon exposure to low concentration of ammonia gas. The resistance of the sensor is decreased, on the other hand, for exposure to reducing gases such as ethyl alcohol, methane, propane and carbon monoxide. A novel method for detecting ammonia gas quite selectively utilizing a sensor array consisting of an ammonia gas sensor and a compensation element were proposed and developed. The compensation element is a Pt-doped $WO_{3}-SnO_{2}$ gas sensor which shows opposite direction of resistance change in comparison with that of the ammonia gas sensor upon exposure to ammonia gas. Excellent selectivity has been achieved using the sensor array having two sensing elements.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.32 no.2
• /
• pp.278-283
• /
• 2005

Impaction of mandibular canine is not common, and transmigration of mandibular canine is rare. Treatment of impacted canine can be removal of physical obstacle and periodic observation, surgical exposure of impacted tooth and orthodontic traction, autotransplantation, surgical extraction. Management of impacted canine depends on existence of physical obstacle, position and direction of impacted tooth, space available for canine eruption, stage of root development. Of the two case in this report, one case involved impaction of lower canine with odontoma and dentigerous cyst that is treated by surgical exposure and orthodontic traction. The other case involved transmigration of lower canine with supernumerary teeth. It was thought difficult to treat only by orthodontic treatment, so the impacted canine was transplanted to its normal position and orthodontic treatment was conducted.

• Journal of Environmental Health Sciences
• /
• v.47 no.6
• /
• pp.505-512
• /
• 2021

Background: The occurrence of environmental disease is known to be associated with chronic exposure to toxic chemicals, including waterborne contaminants, air/indoor pollutants, asbestos, ingredients in humidifier disinfectants, etc. Objectives: In this study, we reviewed toxicological studies related to environmental disease as defined by the Environmental Health Act in Korea and toxic chemicals. We also suggested a direction for future toxicological research necessary for the prevention and management of environmental disease. Methods: Trends in previous studies related to environmental disease were investigated through PubMed and Web of Science. A detailed review was provided on toxicological studies related to the humidifier disinfectants. We identified adverse outcome pathways (AOPs) that can be linked to the induction of environmental diseases, and proposed a chemical screening system that uses AOP, chemical toxicity big data, and deep learning models to select chemicals that induce environmental disease. Results: Research on chemical toxicity is increasing every year, but there is a limitation to revealing a clear causal relationship between exposure to chemicals and the occurrence of environmental disease. It is necessary to develop various exposure- and effect-biomarkers related to disease occurrence and to conduct toxicokinetic studies. A novel chemical screening system that uses AOP and chemical toxicity big data could be useful for selecting chemicals that cause environmental diseases. Conclusions: From a toxicological point of view, developing AOP related to environmental diseases and a deep learning-based chemical screening system will contribute to the prevention of environmental diseases in advance.

• Journal of Conservation Science
• /
• v.7 no.2
• /
• pp.60-67
• /
• 1998

The effects of moisture content (MC) and diffusion period on the diffusion of boron from borate rod through Pinus densiflora and P. koraiensis were investigated as a preliminary research of integrated remedial treatment for heritage wooden structures using borate rod. After equilibrating MCs of samples (15, 25, and 40%), borate rod (1,000 mg) was inserted into the sample, and stored for diffusion of boron at room temperatures ($23^{\circ}C$) for 2, 4, 8, and 12 weeks. Wafers were serially cut at constant intervals from rod treatment point and the boron penetration through longitudinal and transverse direction was measured by staining with boron indicator. For boron diffusion, MC above fiber saturation point was needed, and the diffusion rates increased with time. The fastest rates of diffusion were observed in longitudinal direction, followed by the radial and then the tangential direction. The rates of diffusion in all directions were the fastest in P. koraiensis. In P. densiflora, the diffusion rates through heartwood was faster than that in sapwood in longitudinal direction and vice versa in transverse direction. Based on the best result of this study, optimal space between rod insertion points could be recommended as follows; approximately 120 mm for P. koraiensis and heartwood of P. densiflora, 60 mm for sapwood of P. densiflora in longitudinal direction, and approximately 30 mm for all species tested in transverse direction. However, the effect of rod size and long-term exposure for diffusion on boron movement should be fully investigated for the accurate evaluation of optimal space between rod holes.

• Korean Institute of Interior Design Journal
• /
• no.40
• /
• pp.86-93
• /
• 2003

Korean traditionally prefer a house with a southern exposure to other styles. Moreover, pretty part of dwelling style in Korea is apartment building. But generally, there are much more north oriented rooms than opposite one in apartment. Generally, most Korean tends to consider the direction of the room as an important factor to decide the arrangement of their furniture. Also, the location of window, door, bed, and closet can affect on the decision-making process of furniture layout. So, the closet position should be determined by not only window direction and door position, but also the furniture arrangement preference of residents. After considering the window and door position, there are 16 alternatives in a room. (Multiplied 4 window directions by 4 door positions under the assumption that the window and the door cannot be on the same side of the wall.) Also, this study analyzed each room style ratio considering the symmetry of each plan by comparing the apartment building plan. This paper studied the bedroom style by analyzing the 180 apartment building plans and survey of furniture layout; the furniture in this study represents bed and desk those are mainly laid in Korean bedroom. Finally, this paper suggested the methodology to find optimal alternatives of furniture and closet layout for high-rise apartment residents, based on the door and window position, and the furniture layout preference of residents.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.409-412
• /
• 2002

We found that polyimide surfaces bombarded by a low energy argon ion beam align liquid crystals. The pretilt angle of the liquid crystals is controlled by ion beam parameters, such as the energy of the incident ions, the angle of incidence, exposure time and current density. The alignment direction of liquid crystal on substrates corresponded to ion beam direction. By argon ion beam the pretilt angle of the liquid crystals was controlled between $0.5^{\circ}$ and $4^{\circ}$for SE-3140 under the proper conditons. By the atomic force microscope (AFM), polyimide surfaces before and after bombarded by ion beam are compared.

• Korean Chemical Engineering Research
• /
• v.50 no.6
• /
• pp.1056-1063
• /
• 2012

Recent rapidly growth in nanotechnolgies is promised novel benefits through the exploitation of their unique industrial and biomedical applications. With increasing utilization of nanomaterials in consumer products, the potential release of nanomaterials into the environment and their impacts on the ecosystem and human health have been the issues of concern. Nanomaterials that was exposed unintentionally in environment might be accumulated in various environmental media, and finally it will be influenced to human and ecosystems. Therefore, it is important to understand the fate and behavior of nanoparticles for understanding effects on environmental media (air, water, and soil phase). Therefore, in this work, we investigated the several cases for environmental exposure of nanomaterials and suggested the direction of further research. In workplace, exposure to air media is dominant, but finally waste and wastewater was moved to the water and soil phase. In addition, we found the existing sewage treatment plant was not suitable to remove completely nanomaterials in wastewater flow. To deeper study, environmental monitoring tool must be developed additionally and we suggested the several analyzing method for aged and pristine physicochemical properties of nanomaterials exposed into environmental media. This review for nanomaterials' exposure to environmental media will be helpful to investigate the environmental fate of nanomaterials and define the suitable treatment method for nano-waste.

• Korean Journal of Digital Imaging in Medicine
• /
• v.11 no.1
• /
• pp.21-26
• /
• 2009

In operation room, the use of the C-arm unit is increasing. So, the radiation dose of the person who work in operation room was even more increased than before. Thus, this study is shown the measurement of expose dose and the way for decrease of the radiation dose by using the C-arm unit. The experiment was performed with the C-arm unit and used a phantom which is similar to tissue of the human body and fluoro-glass dosimeter for dose measurement. The expose dose were measured by the tube position(over tube, under tube) of the C-arm unit, distance(50, 100$\sim$200cm), direction(I, II, III, IV), runtime(1min, 3min), wearing of the apron. The radiation dose was decreased twice and three times at under tube rather than over tube. The I direction was measured 20$\sim$30% more than the others. The biggest expose dose is 50cm from center on distance. The expose dose is decreased to far from center. In case of Wearing of the apron, the radiation dose was decreased 60$\sim$90% by the distance. But there weren't change of the radiation dose by C-arm tube position. In present, by increasing the usage of the C-arm unit, the radiation dose is inevitable. So, this study recommends us to use the under tube of the C-arm unit. Also, Wearing of the apron is required for minimum of the radiation exposure.