• Nuclear Engineering and Technology
• /
• v.13 no.3
• /
• pp.161-167
• /
• 1981

For determination of mutation frequency induced by chronic irradiation of low dose gamma rays, Tradescarrfia clone 4430 was exposed to Co-60 ${\gamma}$ rays with different exposure rates from 3.6mR/day to 182R/day in or out of the Gamma Field at Kumkok Experiment Farm of KAERI. Somatic mutations based on pink mutant events of the stamen hair cells were clearly observed by the treatment. The pink mutant events were increased proportionally with increasing exposure rates of gamma ray except for relatively high dose rates of 105 R/day and 182 R/day, indicating saturation effect of mutation. The somatic pink mutations could be fairly detectable even in the low dose rate of 3.6mR/day. Therefore, this stamen hair system of Tradescantia clone 4430 seemed to be an reasonable test system for detecting mutability of low level irradiation. These results imply that artificial mutation induction in the fruit and ornamental trees could be expected in the ${\gamma}$-field.

• Journal of Radiation Protection and Research
• /
• v.46 no.4
• /
• pp.184-193
• /
• 2021

Background: The radionuclides released by the Fukushima Daiichi Nuclear Power Plant (FDNPP) accident 9 years ago are still being monitored by various research teams and the Japanese government. Comparison of different surveys' results could help evaluate the exposure doses and the mechanism of radiocesium behavior in the urban environment in the area. In this study, we clarified the relationship between land use and temporal changes in the ambient dose rates (air dose rates) using big data. Materials and Methods: We set a series of 1 × 1 km² meshes within the 80 km zone of the FDNPP to compare the different survey results. We then prepared an analysis dataset from all survey meshes to analyze the temporal change in the air dose rate. The selected meshes included data from all survey types (airborne, fixed point, backpack, and carborne) obtained through the all-time survey campaigns. Results and Discussion: The characteristics of each survey's results were then evaluated using this dataset, as they depended on the measurement object. The dataset analysis revealed that, for example, the results of the carborne survey were smaller than those of the other surveys because the field of view of the carborne survey was limited to paved roads. The location factor of different land uses was also evaluated considering the characteristics of the four survey methods. Nine years after the FDNPP accident, the location factor ranged from 0.26 to 0.49, while the half-life of the air dose rate ranged from 1.2 to 1.6. Conclusion: We found that the decreasing trend in the air dose rate of the FDNPP accident was similar to the results obtained after the Chernobyl accident. These parameters will be useful for the prediction of the future exposure dose at the post-accident.

• Safety and Health at Work
• /
• v.1 no.1
• /
• pp.51-60
• /
• 2010

Objectives: The level of benzene exposure in the petrochemical industry during regular operation has been well established, but not in turnaround (TA), where high exposure may occur. In this study, the characteristics of occupational exposure to benzene during TA in the petrochemical companies were investigated in order to determine the best management strategies and improve the working environment. This was accomplished by evaluating the exposure level for the workers working in environments where benzene was being produced or used as an ingredient during the unit process. Methods: From 2003 to 2008, a total of 705 workers in three petrochemical companies in Korea were studied. Long- and short-term (< 1 hr) samples were taken during TAs. TA was classified into three stages: shut-down, maintenance and start-up. All works were classified into 12 occupation categories. Results: The long-term geometric mean (GM) benzene exposure level was 0.025 (5.82) ppm (0.005-42.120 ppm) and the short-term exposure concentration during TA was 0.020 (17.42) ppm (0.005-61.855 ppm). The proportions of TA samples exceeding the time-weighted average, occupational exposure level (TWA-OEL in Korea, 1 ppm) and the short-term exposure limit (STEL-OEL, 5 ppm) were 4.1% (20 samples of 488) and 6.0% (13 samples of 217), respectively. The results for the benzene exposure levels and the rates of exceeding the OEL were both statistically significant (p < 0.05). Among the 12 job categories of petrochemical workers, mechanical engineers, plumbers, welders, fieldman and scaffolding workers exhibited long-term samples that exceeded the OEL of benzene, and the rate of exceeding the OEL was statistically significant for the first two occupations (p < 0.05). Conclusion: These findings suggest that the periodic work environment must be assessed during non-routine works such as TA.

• Journal of Preventive Medicine and Public Health
• /
• v.43 no.6
• /
• pp.535-542
• /
• 2010

Objectives: Exposure assessment is a major challenge faced by studies that evaluate the association between pesticide exposure and adverse health outcomes. The objective of this study was to investigate the reliability of information that farmers self-report regarding their pesticide use. Methods: Twenty five items based upon existing questionnaires were designed to focus on pesticide exposure. In 2009, a selfadministrated survey was conducted on two occasions four weeks apart among 205 farmers residing in Gyeonggi and Gangwon provinces. For a reliability measure, we calculated the percentage agreement, the kappa statistics and the intraclass correlation coefficient (ICC) between the two reports according to the characteristics of the subjects. Results: Agreement for ever-never use of any pesticide was 96.4% (kappa 0.61). For both 'years used' and 'age at the first use' of overall pesticides, high agreement was obtained (ICC: 0.88 and, 0.78, respectively), whereas those of 'days used' and 'hours used' were relatively low (ICC: 0.42 and, 0.66, respectively). The kappa value for the use of personal protective equipment ranged from 0.46 to 0.59, and hygiene activities came out at 0.19 to 0.37. The agreement for individual pesticide use ranged widely and there was relatively low agreement due to the low response rates. The reliability scores did not significantly vary according to gender, age, the education level, the types of crop or the years of farming. Conclusions: Our results support that carefully designed, self-reported information on ever-never pesticide use among farmers is reliable. However, the reliability of data on individual pesticide exposure may be unstable due to low response rates and needs to be refined.

• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.sup3
• /
• pp.47-52
• /
• 2016

Breast cancer is the most common malignancy in women in Asia and its incidence is rapidly increasing. Information on the incidence and mortality of breast cancer is essential for planning health and more studies. This study aimed to investigate the age-specific incidence and mortality of breast cancer in Asia in 2012. A total of 639,824 cases of breast cancer were recorded in Asian countries, those with the five highest standardized incidence rates being Israel, Lebanon, Armenia, Singapore, and Kazakhstan. The highest number of deaths was observed in India, China, Indonesia, Pakistan, and Japan, respectively. Tith increasing income and improving living standards in developing countries, the incidence of breast cancer increases. This may be due to longer life, higher exposure to risk factors, eating more fatty foods and obesity, and lower pregnancy rates. The variation in incidence rates of breast cancer is very pronounced in Asia (from 80.5 in Israel to 4.6 in Bhuta). A similar situation exists for mortality rates (from 1.8 in Bhutan to 25.2 in Pakistan).

• Journal of Korean Society for Atmospheric Environment
• /
• v.19 no.E2
• /
• pp.51-61
• /
• 2003

The material exposure tests have been carried out since 1993 to evaluate the relationship between air pollution and material corrosion with the cooperation of the researchers in Japan, China, and Korea. The test pieces such as bronze, copper, marble, and carbon steel have been exposed under both unsheltered and rain-sheltered outdoor condition separately at 18 sampling sites in East Asia. At the same time, the concentration of SO$_2$ and NO$_2$ has been measured simultaneously with passive sampler. The meteorological data were collected from the AWS (Auto-mated weather station) In each country and chemical compositions of wet deposition were also analyzed by the bulk sampling of rainfall every month. As the results, it was found that the corrosion rates of test pieces in the ambient air were appeared to be in the order of carbon steel > marble > bronze copper. The corrosion rates of test pieces in the unsheltered outdoor condition were 2.34 to 5.88 times larger than those in rain-sheltered condition. It was also found that the corrosion rate in the heavy polluted area in China was the highest, and the corrosion rates of the metal pieces were generally proportional to SO$_2$ concentration. Between two sites in Korea, the test pieces at Daegu site showed higher corrosion rates that would be due to the higher SO$_2$ concentration.

• Journal of Environmental Health Sciences
• /
• v.44 no.1
• /
• pp.44-54
• /
• 2018

Objectives: To protect individuals working at the site as well as the surrounding general population from a chemical accident, several emergency exposure guidance levels have been used to set a level of concern for certain chemicals. However, a level of concern has not been established for many substances that are frequently used or produced in large quantities in Korean workplaces. In the present study, we investigated the guidance levels for protecting populations from chemical exposure and the estimation of level of concern using acute inhalation and oral toxicity data. Methods: The number of chemicals to which emergency exposure guidance levels (e.g., ERPG-2, AEGL-2, PAC-2, and IDLH) can be applied were determined among 822 hazardous chemicals according to the 'Technical Guidelines for the Selection of Accident Scenarios (revised December 2016)'. The ERPG and AEGL values were compared across all three tiers for the 31 substances that appeared on both lists. We examined the degree of difference between the emergency exposure guidance levels and the estimates of level of concern calculated from acute inhalation or acute oral toxicity data. Results: Among the 822 hazardous chemicals, emergency exposure guidance levels can be applied to 359 substances, suggesting that the estimates of level of concern should be calculated using acute toxicity data for 56.3% of the hazardous chemicals. When comparing the concordance rates of ERPG and AEGL for 31 substances, the difference between the two criteria was generally small. However, about 40% of the substances have values diverging by more than three-fold in at least one tier. Such discrepancies may cause interpretation and communication problems in risk management. The emergency exposure guidance levels were similar to the estimates of level of concern calculated using acute inhalation toxicity data, but the differences were significant when using acute oral toxicity data. These results indicate that the level of concern derived from acute oral toxicity data may be insufficient to protect the population in some cases. Conclusion: Our study suggests that the development of standardized guidance values for emergency chemical exposure in the Korean population should be encouraged. It is also necessary to analyze acute toxicity data and fill the information gaps for substances that are important in Korean workplace situations.

• Journal of Preventive Medicine and Public Health
• /
• v.47 no.1
• /
• pp.18-26
• /
• 2014

The purpose of this study was to establish food ingestion factors needed to assess exposure to contaminants through food ingestion. The study reclassified the raw data of the Korean National Health and Nutrition Examination Survey in 2001 into 12 subcategories including grain products, meat products, fish and shellfish, and vegetables for international comparability of exposure evaluation. The criteria for food intake calculation were unified according to the characteristics of food groups, and recommended values for food ingestion factors were calculated through moisture correction and recategorization of cooked, processed, and mixed foods for each group. The average intake rate for grain and grain products was 6.25 g/kg-d per capita and the men's intake rate was approximately 8% higher than that of the women. The average intake rate of meat and meat products was 1.62 g/kg-d per capita and the men's intake rate was 30% higher than that of the women, on average. The average intake rate of fish and shellfish was 1.53 g/kg-d per capita, and the age groups of 1 to 2 and 3 to 6 recorded higher capita intake rates than other age groups, 2.62 g/kg-d and 2.25 g/kg-d, respectively. The average intake rate of vegetables was 6.47 g/kg-d per capita, with the age group of 1 to 2 recording the highest per capita intake rate of 9.79 g/kg-d and that of 13 to 19 recording the lowest mean. The study also offers recommended values for food ingestion factors of other food groups by gender, age, and region. The food ingestion exposure factors will need future updates in consideration of ongoing changes in food consumption behavior.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.25 no.1
• /
• pp.27-35
• /
• 2015

Objectives: To investigate safety and health management, conditions in factories or facilities handling radiation-generating devices and radioactive isotopes were reviewed in terms of regulations of radiation safety control in Korea. Radiation exposure levels generated at those facilities were directly measured and evaluated for establishing an effective safety and health management plan. Methods: Government organizations with laws and systems of radiation safety and health were investigated and compared. There are three laws governing radiation-related employment such as occupational safety and health acts, nuclear safety acts, and medical service acts. We inspected 12 workplaces as research objects:four workplaces that manufacture and assemble semiconductor devices, three non-destructive inspection workplaces that perform inspections on radiation penetration, and five workplaces in textile and tire manufacturing. Monitoring of radiation exposure was performed through two methods. Spatial and surface monitoring using real-time radiation instruments was performed on each site handling radiation generating devices and radioactive isotopes in order to identify radiation leakage. Results: According to the occupational safety and health act, there is no legal obligation to measure ionizing radiation and set dose limits. This can cause confusion in the application of the laws, because the scopes and contents are different from each other. Surface dose rates in radiation generating devices such as implanters, thickness gages and accelerators, which were registered according to nuclear safety acts, using surveymeters, and seven of 36 facilities(19.4%) exceeded the international standards for surface radiation dose of $10{\mu}Sv/hr$. Conclusions: The results showed that occupational health and safety acts require a separate provision for measuring and assessing the radiation exposure of workers performing radiation work. Like noise, ionizing radiation will also periodically be controlled by including it in the object factors of work-environment measurement.

• Journal of Radiation Protection and Research
• /
• v.21 no.2
• /
• pp.117-124
• /
• 1996

Source intensities in terms of the exposure rates at 1m from the fresh and spent DUPIC fuels, made from standard and extended turnup PWR fuels, were analyzed. Two cases were studied based on the degree of elimination of removable elements. Homogeneous mixture model was applied to get the exposure rate. The exposure rate turned out to be very high and sensitive to Cs elimination during the dry process. About 90% of exposure can be reduced in the case of fresh DUPIC fuel made from 10-year cooled spent PWR fuels if Cs is fully removed during the dry process. The main radiation source in spent fuels is Cs-137. The dry storage of spent DUPIC fuel may need a longer wet storage period and require a further review.