• 제목/요약/키워드: Exposure Measure

검색결과 574건 처리시간 0.034초

라즈베리파이 카메라를 활용한 이미지 분석 기반 스마트 윈도우 착색 조절 자동화 시스템 (Smart window coloring control automation system based on image analysis using a Raspberry Pi camera)

  • 김민상;안현식;임성민;장은정;이나경;허준혁;강인구;권지현;이준영;김하영;김동수;윤종호;최윤석
    • 전기전자학회논문지
    • /
    • 제28권1호
    • /
    • pp.90-96
    • /
    • 2024
  • 본 논문에서는 라즈베리파이 카메라와 함수 발생기를 활용하여 이미지에서 휘도를 분석하고 이를 바탕으로 전압을 인가하여 스마트 윈도우에 착색을 통해 광 투과를 조절할 수 있는 자동화 시스템을 제안한다. 기존 휘도 측정에 사용되는 휘도계는 가격대가 높고 사용자의 불필요한 움직임을 요구해 실생활에서 활용하기 어렵다. 그러나 사진 촬영 후 Python Open Source Computer Vision Library (OpenCV)를 활용한 이미지에서의 휘도 분석은 저렴하고 휴대가 간편하여 실생활에서 쉽게 응용할 수 있다. 이 시스템을 스마트 윈도우가 적용된 환경에 사용하여 창호의 휘도를 검출하였다. 이미지의 휘도를 바탕으로 스마트 윈도우의 착색 조절을 통해 창호의 휘도를 감소시켜 재실자는 쾌적한 시 환경을 구축할 수 있다.

전력구 터널 건설안전 확보를 위한 디스크커터 마모측정시스템 시작품 개발 및 성능검증 (Development of disc cutter wear sensor prototype and its verification for ensuring construction safety of utility cable tunnels)

  • 김정주;류희환;송승우;도승철;이지윤;정호영
    • 한국터널지하공간학회 논문집
    • /
    • 제26권2호
    • /
    • pp.91-111
    • /
    • 2024
  • 전력구 터널은 송전선로 지중화 사업의 일환으로 대부분의 경우 쉴드 TBM을 활용하여 건설된다. TBM 챔버는 터널 내부 중 유일하게 암반과 흙을 마주하는 공간이며, 붕락과 부딪힘 사고 등 사고노출 빈도가 가장 높은 곳이다. 현재 챔버 외부에서 디스크커터 마모정도를 측정할 수 있는 방법이 부재하기 때문에 근로자의 수시점검이 필수적이다. 이에 본 연구에서는 TBM 챔버 내부 안전사고를 예방하고, 챔버 오픈회수 절감을 통해 공사기간 단축의 효과를 기대하기 위하여 디스크커터 마모측정 기술 개념을 정립하고, 시작품을 제작하였다. 선행기술을 고찰하여 자기센서가 굴착환경에서 가장 적합하다고 판단하여, 자기센서, 무선통신 모듈, 전원공급, 외부 케이싱, 그리고 모니터링 시스템을 종합한 마모측정 센서 패키지를 개발하였다. 실제 굴착환경에서 시작품 성능검증을 수행하기 위해 3.6 m 토압식 쉴드 TBM을 활용한 실대형 굴진시험을 수행하였다. 실대형 굴진시험 결과 8개의 시작품 중 5개가 정상적으로 작동하였다. 최대 3,000 kN의 추력과 1.5 RPM의 회전속도 안에서 센서측정값이 무선통신을 통해 시스템에 원활하게 표출되는지 확인하였고, 센서 케이싱이 파손되지 않아 내구성을 확보하는 것으로 분석되었다.

산소분압(酸素分壓)에 따른 Carboxyhemoglobin의 해리양상(解離樣相) -성인혈(成人血)과 태아혈(胎兒血)의 비교(比較)- (Carboxyhemoglobin Dissociation at the Various Partial Pressures of Oxygen -Comparison between Adult and Fetal Bloods-)

  • 박병주
    • Journal of Preventive Medicine and Public Health
    • /
    • 제15권1호
    • /
    • pp.145-151
    • /
    • 1982
  • 산모(産母)와 태아(胎兒)에서의 CO 배출양상(排出樣相)의 차이(差異)가 hemoglobin의 CO와의 결합력(結合力)의 차이(差異)에서 기인(起因)된 것인지의 여부(與否)를 산소분압(酸素分壓)에 따른 HbCO의 해리양상(解離樣相)으로써 규명(糾明)하고 이를 토대(土臺)로 임신부(姙娠婦) 및 영아가 CO에 중독(中毒)되었을 때의 적절(適切)한 산소치료방식(酸素治療方式)을 모색(模索)하고자 본(本) 실험(實驗)을 실시(實施)하여 다음과 같은 성적(成績)을 얻었다. 1. 성인혈(成人血)과 태아혈(胎兒血)의 total hemoglobin량(量)은 각각(各各) $16.1{\pm}0.50gm%,\;15.7{\pm}0.32gm%$였으며 fetal hemoglobin 비율(比率)은 각각(各各) $1.2{\pm}0.15%,\;72.7{\pm}3.01%$ 였다. 2. 성인혈(成人血)과 태아혈(胎兒血)을 100% HbCO로 포화(飽和)시킨 뒤 일반대기(一般大氣), 100% $O_2$, 3기압산소(氣壓酸素)에 30분간(分間) 폭로(曝露)시킨 직후(直後)의 혈중(血中) HbCO 포화도(飽和度)는 성인혈(成人血)에서 각각(各各) 96.7%, 70.9% 및 52.8%였으며 태아혈(胎兒血)에서 각각(各各) 98.5%, 76.1% 및 62.2%로 감소(減少)하여 3기압산소(氣壓酸素)에서 가장 현저(顯著)한 감소(減少)를 보여 HbCO의 해리(解離)는 산소분압(酸素分壓)에 비례(比例)함이 확인(確認)되었으며 또 전(全) 실험군(實驗群)에서 성인혈(成人血)보다 태아혈(胎兒血)의 HbCO 해리(解離)가 늦은 양상(樣相)을 보였다. 3. 실험군(實驗群)에 대(對)한 각(各) 산소분압별(酸素分壓別) 폭로(曝露)가 끝난 후(後) $36.5^{\circ}C$의 일반대기하(一般大氣下)에서 시간경과(時間經過)에 따른 성인혈(成人血)과 태아혈중(胎兒血中) HbCO의 해리양상(解離樣相)은 거의 비슷하게 완만(緩慢)하였다. 4. 이상(以上)의 소견(所見)으로 미루어 볼 때 임신부(姙娠婦)의 CO 중독(中毒)은 산모(産母)보다 태아(胎兒)에서 더 큰 위해(危害)를 초래(招來)할 가능성(可能性)이 크며 또 HbF의 구성점유율(構成占有率)이 높은 6개월(個月) 이하(以下)의 영아에서도 그 위해도(危害度)가 클 것으로 간주(看做)된다. 따라서 임신부(姙娠婦) 또는 생후(生後) 6개월(個月) 이하(以下)의 영아가 CO 중독(中毒)되었을 때는 고압산소요법(高壓酸素療法)이 효과적(效果的)인 치료법(治療法)으로 보이며 그 치료시간(治療時間)을 성인환자(成人患者)에 있어서의 그것보다 좀 더 길게하는 것이 CO 중독(中毒)에 의한 위해(危害)를 감소(減少)시켜 줄 것으로 기대(期待) 된다.

  • PDF

고용량 방사성옥소 치료를 받은 갑상선분화암 환자에서 Dual Time I-131 Whole Body Scan을 이용한 유효반감기의 측정 (Measurement of Effective Half-life Using Dual Time I-131 Whole Body Scan in Patients with Differentiated Thyroid Cancer Treated by High Dose Therapy)

  • 윤재식;이재곤;이기현;임광석;최학기;이상미
    • 핵의학기술
    • /
    • 제18권1호
    • /
    • pp.98-103
    • /
    • 2014
  • 갑상선 분화암 환자의 방사선 치료에서 I-131의 유효반감기는 환자에게 투여하는 양의 계산뿐만 아니라 환자의 격리 입원기간의 결정, 환자로부터 가족들이 받게 되는 선량을 계산하는데 유용한 값이다. 하지만 이 값은 물리적반감기와는 달리 실측을 해야만 얻을 수 있어 입원 격리중인 환자에게 계측하기가 기술적으로 어려운 문제가 있다. Dual time I-131 whole body scan의 초기촬영과 지연촬영 사이의 체내잔류방사능량을 이용하여 전신과 갑상선에 유효반감기를 추정해 보았다. 또한 혈중 크레아티닌 농도, GFR, 투여량이 유효반감기와 상관관계가 있는지 알아보았다. 유효반감기 측정을 위해 전신에 체내잔류방사능량과 갑상선의 잔류방사능량을 측정하기 위해 환자의 전신을 흥미영역으로 설정한 후 배후방사능을 보정하여 전신의 체내잔류방사능량을 획득하였고, 갑상선 부위에 ROI를 설정한 후 배후 방사능을 보정하여 갑상선의 잔류방사능량을 획득하였다. 초기영상과 지연영상의 측정값 사이의 비율을 계산하여 전신과 갑상선의 유효반감기를 구하였다. 또한 유효반감기와 GFR, 혈중크레아티닌 농도, I-131 투여량과의 상관관계를 분석하였다. 전신의 체내잔류방사능량을 측정한 값의 유효반감기는 $17.06{\pm}5.50$시간으로 나타났고 갑상선의 잔류방사능량을 측정한 값의 유효반감기는 $17.22{\pm}5.41$시간으로 나타났으며 두 유효반감기는 유의한 차이를 보이지 않았다(P=0.887). GFR 값이 올라갈수록 전신의 유효반감기(r=-0.407, P=0.003)와 갑상선 유효반감기(r=-0.473, P=0.001) 모두 유의하게 감소하였으며 혈중크레아티닌 농도가 올라갈수록 전신의 유효반감기(r=0.309, P=0.029)와 갑상선 유효반감기(r=0.371, P=0.008) 모두 유의하게 증가하였다. 투여량은 두유효반감기와 상관관계를 보이지 않았다. 본 연구를 통해 고용량 방사성요오드 치료환자 입원기간의 최적화 연구와 기존 유효반감기를 구하기 위해 종사자의 피폭 및 복잡성을 보완하여 간편하게 측정을 할 수 있을 것이라 생각한다. 또한 분석된 갑상선의 유효반감기를 적용한 MIRD schema의 내부피폭선량 평가 연구에도 활용할 수 있을 것으로 사료된다.

  • PDF

부산지역 일반주택에서의 라돈농도측정 (Radon concentration measurement at general house in Pusan area)

  • 임인철
    • 대한방사선기술학회지:방사선기술과학
    • /
    • 제27권2호
    • /
    • pp.29-33
    • /
    • 2004
  • 1980년대 초까지 우리들은 라돈이 우리의 건강을 해친다는 생각을 하지 못하고 살아 왔다. 그러나 과학자들은 오래 전부터 우리가 사는 실내에 라돈 방사능의 위험이 도사리고 있다는 사실을 알게 되었다. 특히 우리나라에서는 라돈에 대한 위해와 인체에 미치는 영향에 대한 관심이 저조하다. 최근 들어 라돈 오염에 대한 의식을 가지고 서울 지하철의 일부 역, 학교 시설의 실내 공기, 주택 내 공기 중 라돈 문제의 중요성과 위험성에 대해 알리고 측정, 관리하는 관심을 가지게 되었다. 일반적으로 건물의 지반에서 방출된 라돈가스가 건물 바닥 갈라진 틈새 등을 통해 실내로 들어옴으로써 라돈이나 라돈낭핵종의 실내 공기 중 농도는 증가하게 된다. 따라서, 균열된 건물 바닥의 틈, 지하로부터 실내로 들어오는 상하수 파이프와 지반 사이에 틈새가 많을 수록 실내의 라돈 농도는 높아진다. 이와 같이, 라돈은 지각 뿐만 아니라 건축 자재물 상수, 취사용 천연가스 등을 통해서도 실내로 들어오지만 라돈의 85%이상은 지각으로부터 방출된 것이다. 폐암의 한 원인으로 지목 받는 라돈과 라돈 낭핵종에 의한 건강상의 위해는 토양 중 우라늄의 함량이 높은 지역과 광산의 갱내, 동굴, 주택과 같이 밀폐된 공간에서 특히 높아진다. 라돈 농도의 안전한 준위란 알 수 없으며 크든 작든 간에 항상 위험이 존재한다. 그러므로 중요한 것은 주택 및 건물 내에서 라돈의 농도를 낮춤으로써 폐암의 위험을 감소시키는 것이다. 따라서 일반 주택 라돈 농도 측정이 필요한 것으로 생각되어, 신틸레이터 라돈 모니터를 이용하여 월별로 라돈 농도를 측정하였다. 연구결과는 지상보다는 지하가 1년 내내 높게 나타났으며, 여름보다는 겨울이 높게 나타났다. 특히 미국 환경 보호청이 권고하는 주택 내 4 pCi를 넘는 달은 지하 내에서만 나타났으며, 12개월 중 4개월로 나타나 라돈 피폭 심각성을 알게 되었다. 그러므로 라돈에 관한 기준치의 설정과 규제 및 저감 대책의 마련이 시급하다는 생각이 들며, 라돈 농도 측정한 결과를 알리고자 한다.

  • PDF

Piranha 657의 Internal Detector를 이용한 저에너지에서 유리선량계의 선량 특성에 관한 연구 (Experimental Study with Respect to Dose Characteristic of Glass Dosimeter for Low-Energy by Using Internal Detector of Piranha 657)

  • 손진현;민정환;김현수;유광열;임현수;김정민;정회원
    • 대한방사선기술학회지:방사선기술과학
    • /
    • 제35권2호
    • /
    • pp.119-124
    • /
    • 2012
  • 최근 유리선량계는 Thermoluminescent Dosimeter (TLD)와 더불어 진단영역부터 치료영역에까지 즉, 저에너지영역에서부터 고에너지 영역에 걸쳐 광범위하게 흡수선량 측정에 이용되고 있다. 그러나, 유리선량계의 재현성과 에너지 의존성 등 선량특성에 관한 연구 보고는 주로 고에너지 영역에서 이루어진 결과 값들이다. 이는 방사선 선량 측정소자나 측정기들의 특성연구를 137Cs 이나 60Co를 이용하기 때문으로 사료되며 이들은 모두 치료영역에서 사용되는 고에너지 방출 방사선 선원들이다. 따라서, 본 연구에서는 Glass Dosimeter (GD)를 이용하여 진단 영역의 저에너지 방사선 특성을 50kV, 80kV, 100kV 관전압 변화를 주어 측정한 Piranha 선량에 대한 유리선량계의 선형성, 재현성, 시간에 따른 재현성을 실험 평가하였다. 실험 기기 및 방법으로는 진단용 발생장치에서 발생되는 방사선선량 측정은 다기능 QA 측정기(RTI Electronic, Sweden)인 Piranha 657의 internal detector로 측정 하였으며 측정조건은 25mA, 0.02sec, 2.5mAs 그리고 SSD가 100cm일 때 조사면 $10{\times}10cm^2$로 하였다. 유리선량계 총 60개를 50kV, 80kV, 100kV 세 그룹으로 나누고 동일한 조건으로 유리선량계에 조사하였다. 본 실험결과에서 유리선량계의 선형성은 기존 보고된 고에너지 고선량 영역과 같이 저에너지, 저선량에서도 선량에 따른 선형성을 나타냈다. 재현성과 시간에 따른 재현성도 양호하였다. 본 실험결과와 같이 유리선량계는 고에너지영역에서의 선량측정 뿐만 아니라 저에너지의 선량측정도 가능한 선량계임을 알 수 있었다.

Perceptional Change of a New Product, DMB Phone

  • Kim, Ju-Young;Ko, Deok-Im
    • 마케팅과학연구
    • /
    • 제18권3호
    • /
    • pp.59-88
    • /
    • 2008
  • Digital Convergence means integration between industry, technology, and contents, and in marketing, it usually comes with creation of new types of product and service under the base of digital technology as digitalization progress in electro-communication industries including telecommunication, home appliance, and computer industries. One can see digital convergence not only in instruments such as PC, AV appliances, cellular phone, but also in contents, network, service that are required in production, modification, distribution, re-production of information. Convergence in contents started around 1990. Convergence in network and service begins as broadcasting and telecommunication integrates and DMB(digital multimedia broadcasting), born in May, 2005 is the symbolic icon in this trend. There are some positive and negative expectations about DMB. The reason why two opposite expectations exist is that DMB does not come out from customer's need but from technology development. Therefore, customers might have hard time to interpret the real meaning of DMB. Time is quite critical to a high tech product, like DMB because another product with same function from different technology can replace the existing product within short period of time. If DMB does not positioning well to customer's mind quickly, another products like Wibro, IPTV, or HSPDA could replace it before it even spreads out. Therefore, positioning strategy is critical for success of DMB product. To make correct positioning strategy, one needs to understand how consumer interprets DMB and how consumer's interpretation can be changed via communication strategy. In this study, we try to investigate how consumer perceives a new product, like DMB and how AD strategy change consumer's perception. More specifically, the paper segment consumers into sub-groups based on their DMB perceptions and compare their characteristics in order to understand how they perceive DMB. And, expose them different printed ADs that have messages guiding consumer think DMB in specific ways, either cellular phone or personal TV. Research Question 1: Segment consumers according to perceptions about DMB and compare characteristics of segmentations. Research Question 2: Compare perceptions about DMB after AD that induces categorization of DMB in direction for each segment. If one understand and predict a direction in which consumer perceive a new product, firm can select target customers easily. We segment consumers according to their perception and analyze characteristics in order to find some variables that can influence perceptions, like prior experience, usage, or habit. And then, marketing people can use this variables to identify target customers and predict their perceptions. If one knows how customer's perception is changed via AD message, communication strategy could be constructed properly. Specially, information from segmented customers helps to develop efficient AD strategy for segment who has prior perception. Research framework consists of two measurements and one treatment, O1 X O2. First observation is for collecting information about consumer's perception and their characteristics. Based on first observation, the paper segment consumers into two groups, one group perceives DMB similar to Cellular phone and the other group perceives DMB similar to TV. And compare characteristics of two segments in order to find reason why they perceive DMB differently. Next, we expose two kinds of AD to subjects. One AD describes DMB as Cellular phone and the other Ad describes DMB as personal TV. When two ADs are exposed to subjects, consumers don't know their prior perception of DMB, in other words, which subject belongs 'similar-to-Cellular phone' segment or 'similar-to-TV' segment? However, we analyze the AD's effect differently for each segment. In research design, final observation is for investigating AD effect. Perception before AD is compared with perception after AD. Comparisons are made for each segment and for each AD. For the segment who perceives DMB similar to TV, AD that describes DMB as cellular phone could change the prior perception. And AD that describes DMB as personal TV, could enforce the prior perception. For data collection, subjects are selected from undergraduate students because they have basic knowledge about most digital equipments and have open attitude about a new product and media. Total number of subjects is 240. In order to measure perception about DMB, we use indirect measurement, comparison with other similar digital products. To select similar digital products, we pre-survey students and then finally select PDA, Car-TV, Cellular Phone, MP3 player, TV, and PSP. Quasi experiment is done at several classes under instructor's allowance. After brief introduction, prior knowledge, awareness, and usage about DMB as well as other digital instruments is asked and their similarities and perceived characteristics are measured. And then, two kinds of manipulated color-printed AD are distributed and similarities and perceived characteristics for DMB are re-measured. Finally purchase intension, AD attitude, manipulation check, and demographic variables are asked. Subjects are given small gift for participation. Stimuli are color-printed advertising. Their actual size is A4 and made after several pre-test from AD professionals and students. As results, consumers are segmented into two subgroups based on their perceptions of DMB. Similarity measure between DMB and cellular phone and similarity measure between DMB and TV are used to classify consumers. If subject whose first measure is less than the second measure, she is classified into segment A and segment A is characterized as they perceive DMB like TV. Otherwise, they are classified as segment B, who perceives DMB like cellular phone. Discriminant analysis on these groups with their characteristics of usage and attitude shows that Segment A knows much about DMB and uses a lot of digital instrument. Segment B, who thinks DMB as cellular phone doesn't know well about DMB and not familiar with other digital instruments. So, consumers with higher knowledge perceive DMB similar to TV because launching DMB advertising lead consumer think DMB as TV. Consumers with less interest on digital products don't know well about DMB AD and then think DMB as cellular phone. In order to investigate perceptions of DMB as well as other digital instruments, we apply Proxscal analysis, Multidimensional Scaling technique at SPSS statistical package. At first step, subjects are presented 21 pairs of 7 digital instruments and evaluate similarity judgments on 7 point scale. And for each segment, their similarity judgments are averaged and similarity matrix is made. Secondly, Proxscal analysis of segment A and B are done. At third stage, get similarity judgment between DMB and other digital instruments after AD exposure. Lastly, similarity judgments of group A-1, A-2, B-1, and B-2 are named as 'after DMB' and put them into matrix made at the first stage. Then apply Proxscal analysis on these matrixes and check the positional difference of DMB and after DMB. The results show that map of segment A, who perceives DMB similar as TV, shows that DMB position closer to TV than to Cellular phone as expected. Map of segment B, who perceive DMB similar as cellular phone shows that DMB position closer to Cellular phone than to TV as expected. Stress value and R-square is acceptable. And, change results after stimuli, manipulated Advertising show that AD makes DMB perception bent toward Cellular phone when Cellular phone-like AD is exposed, and that DMB positioning move towards Car-TV which is more personalized one when TV-like AD is exposed. It is true for both segment, A and B, consistently. Furthermore, the paper apply correspondence analysis to the same data and find almost the same results. The paper answers two main research questions. The first one is that perception about a new product is made mainly from prior experience. And the second one is that AD is effective in changing and enforcing perception. In addition to above, we extend perception change to purchase intention. Purchase intention is high when AD enforces original perception. AD that shows DMB like TV makes worst intention. This paper has limitations and issues to be pursed in near future. Methodologically, current methodology can't provide statistical test on the perceptual change, since classical MDS models, like Proxscal and correspondence analysis are not probability models. So, a new probability MDS model for testing hypothesis about configuration needs to be developed. Next, advertising message needs to be developed more rigorously from theoretical and managerial perspective. Also experimental procedure could be improved for more realistic data collection. For example, web-based experiment and real product stimuli and multimedia presentation could be employed. Or, one can display products together in simulated shop. In addition, demand and social desirability threats of internal validity could influence on the results. In order to handle the threats, results of the model-intended advertising and other "pseudo" advertising could be compared. Furthermore, one can try various level of innovativeness in order to check whether it make any different results (cf. Moon 2006). In addition, if one can create hypothetical product that is really innovative and new for research, it helps to make a vacant impression status and then to study how to form impression in more rigorous way.

  • PDF

편액과 시문으로 본 요월정원림(邀月亭園林)의 입지 및 조영 해석 (The Location and Landscape Composition of Yowol-pavilion Garden Interpreted from Tablet & Poetry)

  • 이현우;김상욱;임근홍
    • 한국전통조경학회지
    • /
    • 제32권3호
    • /
    • pp.32-45
    • /
    • 2014
  • 본 연구는 편액과 시문이 과거 누정원림의 고유한 입지 및 조영 특성 추론의 중요한 준거(準據)가 된다는 전제 하에, 요월정원림(邀月亭園林)을 대상으로 과거 시점의 입지 및 조영 해석을 고구(考究)하기 위해 시도되었다. 요월정원림이 갖는 의미와 문화재적 위상과 가치의 진정성 제고 및 보존의 당위성을 논의할 목적으로 시도된 연구결과는 다음과 같다. 첫째, 요월정원림은 정원주 김경우(金景遇)를 비롯한 당대 거유들이 교유한 시율풍류의 현장이었다. "조선환여승람 호남읍지(湖南邑誌) 장성읍지(長城邑誌)" 등 고문헌을 통해 사화(士禍)를 피해 머문 은신처로서의 성격과 함께 지역정체성을 형성한 교두보로서의 장소성이 확인되었다. 또한 "요월정원운(邀月亭原韻)"을 통해 누정원림 작정(作庭) 의도 및 조영 동기를 확인한 바, 요월정원림은 세속과 탈속 그리고 현실과 이상이 뒤섞여 길항(拮抗)한 공간으로 해석된다. 둘째, 당호 요월(邀月)은 누정에서 조망했을 때의 승경적 요인 및 자연현상과 관련된 명칭으로, 마주한 '월봉산에 뜨는 달을 맞이함'을 함의하는 어휘로, 이는 자연의 섭리이자 풍류로서 탈속의 이미지와 맞닿아 있다. 즉 요월정은 세속의 희비를 벗어나 자연의 섭리를 따르려한 조영 의도를 반영한 당호로 해석된다. 셋째, 요월정원림의 입지는 "영광속수여지승람(靈光續修輿地勝覽)"을 통해 조영자가 퇴관 후 휴식을 위해 마련한 처소였으며, 월봉산을 마주하여 황룡강(黃龍江)이 굽이쳐 흐르던 승경지였음을 고문헌과 다수의 시문을 통해 확인하였다. 특히, 수호인 인터뷰에 따르면 요월정원림에서 야경의 시지각 빈도(頻度)는 수호인 거처인 고직사에서 요월정을 향해 황룡강 방향인 동쪽을 숙시각(熟視角)으로 조망했을 때가 가장 높다고 한다. 또한 시지각 강도(强度)가 가장 높고 아름다운 풍경은 요월정 좌측 배후면에서 달이 부상하여 요월정 전면(前面)의 배롱나무동산을 가로질러 요월정과 마주한 월봉산 사이에 남중한 때로 증언한 바 있다. 현재 요월정원림의 좌향은 $SE\;141.2^{\circ}$로서 거의 남동향 하고 있는데, 이와 같은 요월정 좌향 설정은 지형조건뿐 아니라 달의 궤적을 유상(遊賞)하기에 최적화된 방향과 시계(視界)를 확보하기 위한 기도(企圖)가 담겼다고 판단된다. 나아가 전면의 황룡강 수면 위로 남중한 달빛이 투영됨으로써, 하늘의 달과 황룡강 강물에 투영된 달이 동시에 감지되게끔 고려된 것으로 추론된다. 넷째, 현재 요월정원림은 요월정과 광산김씨문숙공파종회각(光山金氏文肅公派宗會閣) 및 고직사(庫直舍)로 구성된 '내원 권역'과 진입부를 아우른 배롱나무동산 및 소나무 배후림이 포함된 '외원 권역'으로 구분된다. 나아가 '용소 및 수생식물원 권역' 및 최근 조성된 '황룡정과 공원 권역'으로 외연(外緣)이 확산되면서 교란되고 변용되었다. 다섯째, 조영 당시 요월정원림은 누정에서 조망한 풍경을 안아 들여 누정을 중심으로 지근거리의 일정한 자연을 점유한 방식인 '경계 없는 산수원림'이었으나, 현재 복합경관은 과거 원형경관과는 괴리된 '이질화 분절화 파편화된' 경관으로 파악된다. 마지막으로, 요월정원림이 문화재지정보호구역임을 감안할 때, 편액과 기문에 묘사된 완전한 원형경관으로의 복원은 아니더라도 최소한 원림권역에서의 경관적 악영향과 시각적 훼손을 최소화하기 위한 대책수립이 요망된다.

치과 파노라마 촬영에서 환자의 피폭선량에 관한 연구 (A Study on the Patient Exposure Doses from the Panoramic Radiography using Dentistry)

  • 박일우;정원교;황형석;임성환;이대남;임인철;이재승;박형후;곽병준;유윤식
    • 한국방사선학회논문지
    • /
    • 제7권1호
    • /
    • pp.17-24
    • /
    • 2013
  • 본 연구는 파노라마 표준 촬영에서 환자의 피폭 선량을 측정하여 방사선 생물학적 위험인자를 평가하고 환자의 피폭 선량 저감화 방안을 제시하고자 하였다. 피폭 선량의 측정 오차를 최소화하기 위하여 각 OSL 선량계의 교정상수를 구하였으며 파노라마 표준 촬영에서 간접적으로 포함되는 좌 우측 수정체와 갑상선, 직접적으로 포함되는 상 하 입술, 하악골 첨부, 촬영 중심점을 대상으로 ICRP에서 권고하는 인체 모형 표준 팬텀을 이용하여 측정하였다. 측정 결과, 촬영 중심점의 선량이 $413.67{\pm}6.53{\mu}Gy$로 최대였으며 상 하 입술의 경우 각각 $217.80{\pm}2.98{\mu}Gy$, $215.33{\pm}2.61{\mu}Gy$이었다. 또한 파노라마 표준 촬영에서 간접적으로 포함되는 좌 우측 수정체의 등가선량은 각각 $30.73{\pm}2.34{\mu}Gy$, $31.87{\pm}2.50{\mu}Gy$이었으며 하악골 첨부 및 갑상선의 등가선량은 $276.73{\pm}14.43{\mu}Gy$, $162.07{\pm}4.13{\mu}Gy$이었다. 결론적으로 측정된 피폭 선량은 방사선 생물학적 효과를 유발할 수 있었으며 치과 의료기관의 파노라마 표준 촬영에서 환자의 피폭 선량에 대한 저감화 방안으로 국제기구에서 권고하고 있는 방사선 방어 원칙에 대한 정당한 해석과 제도적 뒷받침(regulation)이 필요하다. 이에 파노라마 검사에 의한 피폭 선량은 기술적 경제적 측면뿐 만 아니라 사회적 인자를 고려하여 합리적으로 용인 가능한 수준까지 최소화하기 위한 체계화된 프로토콜의 제정과 주변 결정 장기를 방어하기 위한 방사선 보호 기구에 대한 추가적 연구가 필요할 것으로 판단되었다.

일부 합성피혁 근로자들의 Dimethylformamide, Methyl Ethyl Ketone, Toluene 노출에 따른 요중 대사물질 (Urinary Metabolites of Dimethylformamide, Methyl Ethyl Ketone, and Toluene exposed Workers in Synthetic Leather Factories)

  • 최호춘;김강윤;안선희;이영자;정규철
    • 한국산업보건학회지
    • /
    • 제11권2호
    • /
    • pp.135-144
    • /
    • 2001
  • This study was performed to measure airborne dimethylformamide(DMF), methyl ethyl ketone(MEK) and toluene and their urinary metabolites concentrations and to determine the relationship between airborne and urinary concentration. Airborne samples and their urinary metabolites were measured 98 male workers who work for 8 synthetic leather factories in a portion of Kyoung-In area. Urine samples were collected at end-of-shift to estimate the exposure levels. 1. The concentration of airborne DMF by process was 8.81 ppm for wet-mixing, 15.05 ppm for wet-coating, 6.03 ppm for dry-mixing, 5.58 ppm for dry-coating, 5.37 ppm for printing, and 9.03 ppm for total. There was statistically significant difference by process. Urinary NMF concentrations of wet-mixing, wet-coating, dry-mixing, dry-coating and printing were $90.55mg/{\ell}$, $79.80mg/{\ell}$, $39.86mg/{\ell}$, $25.23mg/{\ell}$, and $38.15mg/{\ell}$, respectively, and total geometric mean was $56.24mg/{\ell}$. There was significant difference by process. 2. The concentration of airborne MEK by process was 1.89 ppm for wet-mixing, 1.96 ppm for wet-coating, 10.33 ppm for dry-mixing, 29.24 ppm for dry-coating, 14.98 ppm for printing, and 4.87 ppm for total. There was statistically significant difference by process. Urinary MEK concentrations of wetmixing, wet-coating, dry-mixing, dry-coating and printing were $0.93mg/{\ell}$, $0.70mg/{\ell}$, $3.29mg/{\ell}$, $3.29mg/{\ell}$, and $1.06mg/{\ell}$, respectively, and total geometric mean was $1.25mg/{\ell}$. There was statistically significant difference by process. Urinary MEK 3. The concentration of airborne toluene by process was 0.35ppm for wet-mixing, 0.42ppm for wet-coating, 2.95ppm for dry-mixing, 11.67ppm for dry-coating, 4.88ppm for printing, 1.24ppm for total. There was statistically significant difference by process. Urinary hippuric acid concentrations of wet-mixing, wet-coating, dry-mixing, dry-coating and printing were 0.24g/g creatinine, 0.21g/g creatinine, 0.34g/g creatinine, 0.52g/g creatinine, and 0.29g/g creatinine, respctively and total geometric mean was 0.28g/g creatinine. There was statistically significant difference by process. 4. No. of exceeded KPEL was 40 workers(40.8%) for DMF(10ppm), 1 worker(1.0%) for MEK(200ppm), and no worker for toluene(100ppm). No. of exceeded KBEI was 62 workers(63.3%) for urinary NMF($40mg/{\ell}$), 29 workers(29.6%) for urinary MEK, 1 worker(1.0%) for urinary hippuric acid. 5. The regression equations were Log(NMF)=0.4094*Log(DMF)+1.3587(r=0.4516) for DMF, Log(MEKU)=0.1859*Log(MEK)-0.0324(r=0.3303) for MEK, Log(HA)=0.2106*Log(Toluene)-0.5685(r=0.4497) for toluene. Synthetic leather factory workers expose to 3 kinds of organic solvents which are DMF, MEK and toluene. Their urinary NMF and MEK levels were higher than their concentration levels through respiratory. It seems that the urinary levels were affected skin absorption for working habit and alcohol intake.

  • PDF