• The Journal of Korean Academy of Prosthodontics
• /
• v.17 no.1
• /
• pp.23-34
• /
• 1979

In this study, the adhesive strength of three commercial polycarboxylate cements to ten types of dental casting alloys, such as gold, palladium, silver, indium, copper, nickel, chromium, and human enamel and dentine were measured and compared with that of a conventional zinc phosphate cement. The $8.0mm{\times}3.0mm$ cylindrical alloy specimens were made by casting. The enamel specimens were prepared from the labial surface of human upper incisor, and the dentine specimens were prepared from the occulusal surface of the human molar respectively. Sound extracted human teeth, which had been kept in a fresh condition since, extraction, were mounted in a wax box with a cold-curing acrylic resin to expose the flattened area. The mounted teeth were then placed in a Specimen Cutter (Technicut) and were cut down under a water spray, and then the flat area on the all specimens were ground by hand with 400 and 600 grit wet silicone carbide paper. Two such specimens were then cemented together face-to-face with freshly mixed cement, and moderate finger pressure was applied to squeeze the cement to a thin and uniform film. All cemented specimens were then kept in a thermostatic humidor cabinet regulated at $23{\pm}2^{\circ}C.$ and more than 95 per cent relative humidity and tested after 24 hours and 1 week. Link chain was attached to each alloy specimen to reduce the rigidity of the jig assembly, and then all the specimens were mounted in the grips of the Instron Universal Testing Machine, and a tensile load was delivered to the adhering surface at a cross head speed of 0.20 mm/min. The loads to which the specimens were subjected were recorded on a chart moving at 0.50 mm/min. The adhesive strength was determined by measuring the load when the specimen separated from the cement block and by dividing the load by the area. The test was performed in a room at $23{\pm}2^{\circ}C.$ and $50{\pm}10$ per cent relative humidity. A minimum of five specimens were tested each material and those which deviated more than 15 per cent from the mean were discarded and new specimens prepared. From the experiments, the following results were obtained. 1) It was found that the adhesive strength of the polycarboxylate cement to all alloys tested was considerably greater than that of the zinc phosphate cement. 2) The adhesive strength of the polycarboxylate cements was superior to the non precious alloys, such as the copper, indium, nickel and chromium alloys, but it was inferior to the precious gold, silver and palladium alloys. 3) Surface treatment of the alloy was found to be an important factor in achieving adhesion. It appears that a polycarboxylate cement will adhere better to a smooth surface than to a rough one. This contrasts with zinc phosphate cements, where a rough helps mechanical interlocking. 4) The adhesion of the polycarboxylate cement with enamel was found superior to its adhesion with dentine.

• Korean journal of communication and information
• /
• v.68
• /
• pp.130-165
• /
• 2014

By exploring the works of popular culture, our research aims to demonstrate that culture and politics revolve around each other. Culture and politics are not separate but are articulated into cultural politics; the process of articulation reveals various comparable areas, including contradictions and differences. Our research pays specific attention to Japanese modernity in the eight popular manga series by Naoki Urasawa. These works seemingly value peace and brotherhood, placing themselves in opposition to the logics of the conservative right wing. After engaging in a thorough reading and re-reading, however, we found three salient themes in the deep layers of the works: first, no-nationality a-nationality; second, the relationship between Japan and the West, and representation of Asia; and third, nostalgia for Japan of the past, and transnational desire. The manga series contain the ideas of leaving Asia and entering the West and overcoming modernity. Our research findings reveal that the works of popular culture, specifically those by Naoki Urasawa, subtly expose transnational desires of Japan in tandem with the tensions in international politics between Asia and Japan.

• International Commerce and Information Review
• /
• v.18 no.3
• /
• pp.181-201
• /
• 2016

In this study, transaction cost approach was applied to analysis on direct export determinants of SMEs by using key attributes of transactions, asset specificity, environmental uncertainty, frequency and marketing capability, with a parameter of opportunism. Typical Transaction Cost Analysis theory explains that when transaction cost with business channels(whether it is for buy or sell) increase, the firms integrate the channels. So it is a choice made by firms regarding direct versus indirect channels. The theory was extended to a model of choice of institutional form of direct or indirect export by a norm of opportunism in this empirical study. The survey result showed that lower level of asset specificity and marketing capability or higher level of environmental uncertainty were likely to expose indirect exporters to higher level of opportunism of direct exporter. And we also saw that indirect exporters were likely to choose direct export chanel when opportunism of exporters was higher. From the standpoint of theory, we can say that the basic propositions of the Transaction Cost Analysis, except the attribute of frequency, are supported. This study result could provide a profiling of target business areas and firms for government's policy on direct export promotion of SMEs.

• The Journal of Korean Academy of Prosthodontics
• /
• v.34 no.2
• /
• pp.349-362
• /
• 1996

To determine the factors to affect on stone surface porosities produced from hydrogen gas of additional silicone, both putty and syringe type of 7 commercially different additional silicone impression materials(Blend-A-Scon, Correct VPS, Exaflex, Express, Extrude, Provil, Reprosil) were chosen and NewFujirock(GC) was poured into the impressions of detail-reproducing test block at 1, 15, 30, 45, 60 minutes after the impression materials had set and 4 specimens were made for each pouring time, each type of impression material, and each consisency and So, 280 specimens were made in total. The number of surface porosities of same area($2826 mm^2$) which were typically caused by hydrogen gas using the stereoscope(X 7.5) by two observers. Comparison of putty-syringe type and among the impression materials are tested by Kruscal-Wallis method and Mann-Whitney method(p<0.05). The results are as follows. 1. The number of porosities decreased as the pouring time of stone was delayed on both putty and syringe type of additional silicone materials. 2. The putty type significantly produced more porosities than syringe type except for the group of Reprosil.(p<0.05). 3. In case of putty type, the number of porosities increased as following order. Reprosil / Blend-A-Scon and Provil / Correct VPS and Extrude / Express and Exaflex. 4. In case of syringe type, Blend-A-Scon and Extrude produced no porosity and Exaflex and Provil at 30 minites, but Express produced porosities even at 60 minutes and the most. Additional silicone impression material releases hydrogen gas, and that fact can make the resulting die stone model useless. So, to minimize these adverse effects, it is desirable not to expose putty type of additional silicone on critical impression surface because putty type has a tendency to produce more porosities than syringe type. And it is important to have sufficient time before pouring the stone on impression because porosities produce less as time passes after setting of impression material. Also, there are differences among 7 additional silicone impression materials, so it is desirable to choose adequate brand of additional silicone for good laboratory work.

• Journal of Periodontal and Implant Science
• /
• v.26 no.3
• /
• pp.701-713
• /
• 1996

The purpose of this study was to evaluate the biocompatibility of the Nd:YAG lased root surface followed by root planing and/or tetracyline-HCI(T.C.-HCI) conditioning. $30,4mm{\times}4mm$ root segments were obtained from unerupted third molars and 21, periodontally involved root segments. The treatment groups were as follows : (1) healthy root cementum surface groups : 1) control(non-treated group), 2) lased only, 3) lased/root planed, and 4) lased/T.C.-HCI. (2) diseased root cementum surface groups : 1) control(root planed only), 2) lased/root planed, and 3) lased/root planed/T.C.-HCI. The specimens were treated with a Nd:YAG laser using a $320{\mu}m$ noncontact optic fiber handpiece with an energy setting of 1.5W($114.6J/cm^2$), 2.0W($152.9J/cm^2$), 5.0W($382J/cm^2$) for one minute. The fiber was held perpendicular to the petri dish(NUNC) 2cm apart in an attempt to expose the entire root segments equally. Human gingival fibroblasts were cultured from explants of normal interdental gingival tissue obtained during third morlar extraction. The attachment assay was performed with third-generation fibroblasts. The numbers of gingival fibroblasts attached to the root surface were counted on each specimen under the light microscope, and were statistically analyzed by the oneway ANOVA followed by Tukey's test in SPSS/PC+programs. The results were as follows : 1) In healthy root cementum surfaces, lased/root planed groups exhibited a significantly increased fibroblast attachment compared to controls, lased only, and lased/T.C.-HCI groups(p<0.05), 2) In diseased root cementum surfaces, laser treatment followed by root planing and/or T.C.HCl groups exhibited a increased tendency of fibroblast attachment compared to root planed only group. The results suggest that laser treatment followed by root planing and/or T.C.-HCl would appear necessary so as to render the root surface biocompatible.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.37 no.4
• /
• pp.422-428
• /
• 2010

Giomer is fluoride-releasing, resin-based dental materials that comprise PRG(pre-reacted glass ionomer) filler. The purpose of this study was to evaluate the shear bond strength of Giomer using self-etching primer systems to bovine dentin. Bovine incisors were mounted in self-curing orthodontic resin and the facial surfaces were wet ground on SIC paper to expose the dentin. Total 100 samples were made and divided randomly into 4 groups, Giomer group(I), Composite resin group(II) and Compomer group(III), Giomer and single bottle adhesive group(IV). The shear bond strengths of 25 samples per each group were measured using universal testing machine. And data were analyzed statistically with One-way ANOVA and Scheffe test. Giomer group(I) showed the significantly higher bond strength than Compomer group(III)(p<0.05). There was no significant difference between Giomer group(I) and Composite resin group(II)(p>0.05). And there is no significant difference between gourp(I) and group(IV). Based on the results of present study, the use of Giomer as an esthetic restorative material for primary teeth might be justified. It is considered that more study about the fluoride releasing ability is needed to evaluate the anticariogenic effect of giomer.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.8 no.1
• /
• pp.51-59
• /
• 2013

This study, through the domestic literature research and the success stories of restaurant business, derived the success factors, the impact of these factors on the management performance was carried out through a survey for the establishment of Foodservice Business empirical research. First, according to the result that analyze effect that founder special quality factor gets in management result, was expose that a social technology causes effect that keep in mind in net profit growth rate and customer rate of increment and result that establishment readiness keeps in mind in net profit growth rate, customer rate of increment and seat turnover rate was confirmed. Second, in operation management factor accessibility in customer rate of increment and seat turnover rate, facilities in seat turnover rate, service capacity in net profit growth rate and customer rate of increment and seat turnover rate, promotion activity was confirmed that keep in mind each in customer rate of increment. Third, the effect that quality directivity gets in management result in occasion of establishment restaurant business in goods factor was confirmed that do not keep in mind statistically. Therefore, this study, by presenting the factors for establishment of restaurant business, may contribute to the success strategy establishment of the establishment restaurant business preparator and existing restaurant businessmen.

• Tunnel and Underground Space
• /
• v.17 no.4
• /
• pp.266-284
• /
• 2007

Recently, many efforts have been made to construct the first unlined tunnel, without in-situ concrete lining, in Korea. However, the lack of reliability in the performance of shotcrete as permanent tunnel support prevented from its realization. Shotcrete has been regarded to have significant problems in field application and long term performance because of unsatisfactory strength level and durability compared to those of European countries. In this study, the high strength shotcrete satisfying compressive strength over 40 MPa and flexural strength over 4.5 MPa was developed from optimized mix design. The type of accelerators and the amount of silica fume were selected as the main factors in mixing process and the analyses were carried out up to the elapsed time of 2 years. In order to evaluate the short term durability of shotcrete, an array of laboratory test consisting of freeze-thaw, carbonation chloride penetration and permeability test was performed. For long-term durability tests, specimens have been put in an operated highway tunnel to expose them to the similar environment when they are actually used as an unlined tunnel support. From the strength and durability tests, it was found that only alkali-free based accelerator satisfied the target strength of this study and also, the developed shotcrete showed very high performance in its durability.

• Korean Journal of Digital Imaging in Medicine
• /
• v.12 no.1
• /
• pp.27-31
• /
• 2010

The purpose of this study was to investigated the usefulness of MR perfusion image comparing with SPECT image. A total of pediatric 30 patients(average age : 7.8) with Moyamoya disease were performed MR Perfusion with 32 channel body coil at 3T from March 01, 2010 to June 10, 2010. The MRI sequences and parameters were as followed : gradient Echo-planar imaging(EPI), TR/TE : 2000ms/50ms, FA : $90^{\circ}$, FOV : $240{\times}240$, Matrix : $128{\times}128$, Thickness : 5mm, Gap : 1.5mm. Images were obtained contrast agent administrated at a rate of 1mL/sec after scan start 10s with a total of slice 1000 images(50 phase/1 slice). It was measured with visual color image and digitize data using MRDx software(IDL version 6.2) and also, it was compared of measurement with values of normal and abnormal ratio to analyze hemodynamic change, and a comparison between perfusion MR with technique using Warm Color at SPECT examination. On MR perfusion examination, the color images from abnormal region to the red collar with rCBV(relative cerebral blood volume) and rCBF(relative cerebral blood flow) caused by increase cerebral blood flow with brain vascular occlusion in surrounding collateral circulation advancement, the blood speed relatively was depicted slowly with blue in MTT(Mean Transit Time) and TTP(Time to Peak) images. The region which was visible abnormally from MR perfusion examination visually were detected as comparison with the same SPECT examination region, would be able to confirm the identical results in MMD(Moyamoya disease)judgments. Hymo-dynamic change in MR perfusion examination produced by increase and delay cerebral blood flow. This change with digitize data and being color imaging makes enable to distinguish between normal and abnormal area. Relatively, MR perfusion examination compared with SPECT examination could bring an excellent image with spatial resolution without radiation expose.

• The Korean Journal of Rehabilitation Nursing
• /
• v.5 no.1
• /
• pp.7-17
• /
• 2002

The purpose of this study was to investigate the effect of taping therapy on activities of daily livings (ADL), hand function and range of motion in poststroke-hemiplegic patients. Sample were selected from 20 poststroke-hemiplegic patients at public health center in the period from September 5 to November 21, 2001. The research design was one group pretest-posttest design. The hemiplegia period of the participants was from one year to five years. The pretest and posttest included measuring activity of daily livings(ADL), instrumental activity of daily livings(IADL), hand function, range of motion, quality of life. In this research design, a treatment were to expose taping therapy who were received self-help management program. This self-help management program was composed of five sessions and each session had health education on stroke, diet, risk factor, ROM exercise and recreation. 20 patients were treated with kinesio taping(Nippon Sigmax Co., Ltd., Benefact(r), width 50mm). Tapes were applied to the Deltoid, Supraspinatus, Infraspinatus, Brachioradialis with paralyzed upper extremity. The taping therapy was performed once a week for 5 weeks. SPSS Win 8.0 was used for the data analysis. The results of this study were as follows: 1) The score of BADL was increased from 30.5 to 33.95 after program, and that was statistically significant(p=.019). 2) The score of IADL was increased from 11.6 to 12.75 after program, but that was statistically insignificant(p=.161). 3) The score of hand function was increased from 17 to 20.35 after program, and that was statistically significant(p=.026). 4) The shoulder's ROM(p=.000) and wrist's ROM(p= .004) were significantly increased. According to the results of this study, taping therapy is effective for improving ADL, hand function, ROM, quality of life. However, this study found no significant differences in IADL. Consequently, these findings showed that the taping therapy was effective in improvement of physical aspects(BADL, hand function, upper extremity's ROM) in poststroke-hemiplegic patients.