• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.32 no.11
• /
• pp.832-840
• /
• 2008

Ablation occurs at irradiance beyond $10^9\;W/cm^2$ with nanosecond and short laser pulses focused onto any materials. Phenomenologically, the surface temperature is instantaneously heated past its vaporization temperature. Before the surface layer is able to vaporize, underlying material will reach its vaporization temperature. Temperature and pressure of the underlying material are raised beyond their critical values, causing the surface to explode. The pressure over the irradiated surface from the recoil of vaporized material can be as high as $10^5\;MPa$. The interaction of high power nanosecond laser with a thin metal in air has been investigated. The nanosecond pulse laser beam in atmosphere generates intensive explosions of the materials. The explosive ejection of materials make the surrounding gas compressed, which form a shock wave that travels at several thousand meters per second. To understand the laser ablation mechanism including the heating and ionization of the metal after lasing, the temporal evolution of shock waves is captured on an ICCD camera through laser flash shadowgraphy. The expansion of shock wave in atmosphere was found to agree with the Sedov's self-similar spherical blast wave solution.

• Proceedings of the KIEE Conference
• /
• 1996.07c
• /
• pp.1913-1916
• /
• 1996

With a progress of electrical and electronic technology, radio-frequency circuits including high frequency components are widely applied to various industrial installations. Some of them are used in hazardous locations where explosive or flammable gases exist. As a result, ignition of such gases may be induced by a spark discharge when the radio frequency circuits are switched on or off. The purpose of this study is to investigate the ignition hazards of acetylene-air and ethylen-air mixtures experimentally based on the IEC 79-3 publication. In this experiment, we used a high frequency resistive circuit which consists of a co-axial cable, a $10{\Omega}$, $20{\Omega}$, $30{\Omega}$, $40{\Omega}$ or $50{\Omega}$ resistor and a power amplifier with frequency range up to almost 1 MHz. Experimental results show that the ignition of the acetylene-air and ethylen-air mixtures due to spark discharge depends primarily on the frequency of the power source in the resistive circuit: the minimum ignition voltage increases gradually with the increase of the frequency.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2007.04a
• /
• pp.367-370
• /
• 2007

Recently, With explosive national land developments construction fields ate increasing, and slope failures are disastrous when they occur in mountainous area adjoining highways. but public institutions and supervisors, to manage slope need GIS for managing it more quickly and correctly. For manage slope, it is nesessary to use new IT, especially wireless internet. The current domestic population using cell phones exceeded 30 million and the domestic wireless Internet environment has matured, but implementation of mobile technology for government services isnot matured enough. In this paper the author proposed a new system of mobile PPT monitoring for managing slope inspection for Ubiquitous Environment. This new system manages data in real time and reduces human power when applied to current working environments. This research was supported by a grant(NEMA-06-NH-05) from the Natural Hazard Mitigation Research Group, National Emergency Management Agency.

• The Journal of Information Technology
• /
• v.8 no.1
• /
• pp.11-25
• /
• 2005

The purposes of this study were to explain consumer attitude, expenses and satisfaction of mobile-phone Users. The data of this study used from Pollever.com. This study was satisfaction of mobile-phone users in Korea. The users were consumers of Samsung, LG, SK-Telecom and Pantack. The critical success factor was on the subside for mobile-phone in the growth of mobile service, which we can analyze in its positive effects. Fifty percent of consumers were unsatisfaction with local companies without Samsung. Now most of local mobile-companies will developed music-phone, high-tec camera-phone, hi-slim phone, and health-phone. But, the results of this study are as fallow: Most of consumer' main issues were design, weight, and brand power. It was in that it played the driving force to upgrade the local mobile-phone services into international level with the explosive growth in business by providing cheap phones.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.25 no.3
• /
• pp.135-142
• /
• 2017

As PED(Personal Electronic Device) market has been rapidly grown, the demand on Lithium battery, which is most commonly used power source of PED, also has been increased. Dew to this trend, the amount of Lithium battery air transportation is also increasing. However, it should be treated very carefully because Lithium is one of very explosive metal. So ICAO, IATA and civil aviation agencies try to enhance the safety of Lithium battery air transportation by aircraft certification and operating regulations. To enhance in-flight safety, the aircraft for transporting Lithium battery should equip certified fire extinguishing system. But recent studies find that Halon, currently used extinguishing agent, is not effective on extinguishing Lithium battery fire. Besides, there is no certified Halon replacement for air use and no acceptable specific minimum performance standard(MPS) for Lithium battery fire. For this issue, a study on characteristics and establishing MPS of Lithium battery fire is needed for safe air transportation of Lithium battery.

• Proceedings of the KSME Conference
• /
• 2002.08a
• /
• pp.407-410
• /
• 2002

A series of steam explosion experiments using real core materials of $ZrO_2$ and corium(a mixture of $ZrO_{2}\;and\;UO_{2}$) has been performed to evaluate the risk of steam explosion load in nuclear power plants. Surprisingly, spontaneous steam explosions are observed far both materials, which have been thought to be inexplosive so far. The dynamic pressure and morphology of the debris clearly indicate the evidence of an explosion. The experimental results also indicate that $ZrO_2$ is more explosive than corium.

• Journal of Aerospace System Engineering
• /
• v.10 no.1
• /
• pp.118-126
• /
• 2016

North Korea has continued developing ballistic missiles with various ranges. Even through the recent launch long-range missiles, it can be inferred that North Korea's Missile technology has reached a level where it can even threaten the US. moreover, through the three times nuclear tests, North Korea is known to have succeeded at gaining 10~20KT of explosive power as well as the minimization and lightening of nuclear warhead. Considering the short length of war zone in Korean peninsula and the possibility of nuclear equipment, if be the most severe threat across the whole peninsula. Since the midcourse phase flight takes the longest time, ROK should establish the ability to intercept at this middle phase. From this perspective, this paper describes mission effect of a sea-based BMD system through empirical threat and flight characteristic analysis using MIT model that was not suggested in original research.

• Journal of Wellness
• /
• v.7 no.2
• /
• pp.101-111
• /
• 2012

The benefits and risks of whole body vibration (WBV) based acceleration training on the human body have been documented for many years. WBV training has been shown to increase muscular strength, explosive power, bone strength, performance, mobility, cardiovascular function, circulation and anabolic hormone level and so on. The purpose of this review is correct understanding and application of WBV training. Without proper understanding, rather, to apply WBV to the human body can be fatal harm, and therefore know that what is vibration and has advantages and disadvantages. If there is anything positive side there is bound to the negative aspects. In this regard, WBV training can have a positive impact on the already confirmed by several studies and also, there have been scientifically proven. But still we are part of a scientific approach that is acceptable even to keep in mind that you will always coexist. Once again, the effect of WBV with a physical stimulus that risk and should be remembered. In addition, given the momentum and how to exercise and well-being well aware that vibration exercise as a way to think of how not to be familiar with.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.42 no.5
• /
• pp.430-436
• /
• 2014

The mission objective of STEP Cube Lab. (Cube Laboratory for Space Technology Experimental Project) classified as a pico-class satellite is to verify the technical effectiveness of payloads such as variable emittance radiator, SMA washer, oscillating heat pipe and MEMS based solid propellant thruster researched at domestic universities. In addition, the MEMS concentrating photovoltaic power system and the non-explosive holding and separation mechanism with the advantages of high constraint force and low shock level will be developed as the primary payloads for on-orbit verification. In this study, the feasibility of the mission actualization has been confirmed by the preliminary system design.

• Journal of Energy Engineering
• /
• v.23 no.2
• /
• pp.149-157
• /
• 2014

The steam generator tubes of nuclear power plants have various types of corrosion failures during the plant operation. The stress corrosion cracking which occurs on the outer surface of tube is called the secondary side stress corrosion cracking and mainly occurs in the expansion-transition area of tube. The causes are the concentration of impurities by the sludge pile-up related to the geometry of its region and the residual stress by tube expansion in the process of steam generator manufacturing. Especially the directionality and sizes of residual stresses are differed according to the tube expansion methods and the direction and the frequency of tube cracks depend on their characteristics. In bases on the plant experiences, it is notified that circumferential cracks of tubes expanded with explosive expansion method are dominantly occurred compared to those of tubes done with hydraulic expansion one. Therefore in this study, according to tube expansion methods frequencies and sizes of tube cracks with specific direction are compared by means of accelerated immersion test and also the crack morphology and the specific chemicals from water-chemistry environment are observed through the fracture surface examination.