• Tunnel and Underground Space
• /
• v.22 no.1
• /
• pp.69-76
• /
• 2012

Theoretical backgrounds on the experimental methods of explosive welding, explosive forming and shock consolidation of powders are introduced. Explosive welding experiments of titanium (Ti) and stainless steel (SUS 304) plate were carried out. It was revealed that a series of waves of metal jet are generated in the contact surface between both materials; and that the optimal collision velocity and collision angle is about 2,100~2,800 m/s and $15{\sim}20^{\circ}$, respectively. Also, explosive forming experiments of Al plate were performed and compared to a conventional press forming method. The results confirmed that the shock-loaded Al plate has a larger curvature deformation than those made using conventional press forming. For shock consolidation of powders, the propagation behaviors of a detonation wave and underwater shock wave generated by explosion of an explosive are investigated by means of numerical calculation. The results revealed that the generation and convergence of reflected waves occur at the wall and center position of water column, and also the peak pressure of the converged reflected waves was 20 GPa which exceeds the detonation pressure. As results from the consolidation experiments of metal/ceramic powders ($Fe_{11.2}La_2O_3Co_{0.7}Si_{1.1}$), shock-consolidated $Fe_{11.2}La_2O_3Co_{0.7}Si_{1.1}$ bulk without cracks was successfully obtained by adapting the suggested water container and strong bonding between powder particles was confirmed through microscopic observations.

• Explosives and Blasting
• /
• v.17 no.4
• /
• pp.18-31
• /
• 1999

The explosive forming has been used for many year to expand tubes into tubesheets. this process has demonstrated ability to direct carefully the energy of an explosive to expand tubes into tubesheet holes without damaging the tubesheet and without causing the excessive cold work at the tube I.D. that is normally associated with mechanical expansion. The success of explosive tube expansion provided the background for the development of the explosive tube plug. The main results are as follows : (1) The optimum explosives and explosive qualities are PETN, RDX, HMS and about 18~31gr/ft of explosive plugging in nuclear steam generator. (2) Explosive plugging's thickness is 0.9~1.8mm. If groove of 0.4 mm formed in plug outside, For the hydraulic leakage is go up, explosive plugging of formed groove are applicate tube and tubrplate. (3) Sheath is designed on the polyethylene of low density, In thermal impact test of the $430^\circ{C}$, hydraulic leakage is $300kg/cm^2$. (4) About 10~60mm oxide inclusions are existed on the space of explosive plug and tube protect to the leakage.

• Journal of the KSME
• /
• v.28 no.5
• /
• pp.476-486
• /
• 1988

전자기 성형이란 고강도의 자기장을 이용하여 고속(15∼300m/s)으로 금속을 성형하는 기술이다. 즉, 자계가 갖는 에너지를 직접 금속의 성형에 이용하는 성형법으로 일반적으로 고속도 가공 법(explosive, electro-hydraulic, pneumatic-mechanical, electro-magnetic pulse forming)이라 불리는 가공 기술의 한 가지이다. 전자기 성형 기술은 1960년경 미국에서 개발 및 실용화로의 노력이 경주되어 산업적, 이론적으로 많은 발전이 있었고 일본에서도 1970년 초반에 이 분야의 연구가 시작하여 현재 활발히 연구되고 있는데, 금속의 성형, 체결, 조립 등의 작업에 이용되어 자동차 산업, 항공산업, 전기산업과 병기산업 등에서 많이 이용되고 있다. 한편 우리나라에서는 아직 연구발표된 사례가 없는 실정인데, 몇몇 업체 및 연구소에서 성형 장비를 도입하고 연구를 시작하려는 시점에 있으므로 본 글에서 그 성형 원리 및 가공 특성에 대해 소개한다.

• Journal of Soil and Groundwater Environment
• /
• v.17 no.6
• /
• pp.119-128
• /
• 2012

The applicability and accuracy of Revised Universal Soil Loss Equation (RUSLE) model on the estimation of soil loss at impacted area of shooting range was tested to further the understanding of soil erosion at shooting ranges by using RUSLE. At a shooting range located in northern Kyunggi, the amount of soil loss was estimated by RUSLE model and compared with that estimated by Global Positioning System-Total Station survey. As results, the annual soil loss at a study site (202 m long by 79 m wide) was estimated to be 2,915 ton/ha/year by RUSLE and 3,058 ton/ha/year by GPS-TS survey, respectively. The error between two different estimations was less than 5%, however, information on site conditions should be collected more to adjust model coefficients accurately. At the study shooting range, sediments generated by rainfall was transported from the top to near the bottom of the sloping face through sheet erosion as well as rill erosion, forming a gully along the direction of the storm water flow. Coarser fractions of the sediments were redeposited in the limited area along the channel. Distribution characteristics of explosive compounds in soil before and after summer monsoon rainfall in the study area were compared with the erosion patterns. Soil sampling and analyses results showed that the dispersion of explosive compounds in surface soil was consistent with the characteristics of soil erosion and redeposition pattern of sediment movements after rainfalls.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.24 no.5
• /
• pp.219-223
• /
• 2014

Pulsed laser ablation in liquid medium was successfully employed to synthesize hydroxyapatite colloidal nanoparticles. The crystalline phase, particle morphology, size distribution and microstructure of the hydroxyapatite nanoparticles were investigated in detail. The obtained hydroxyapatite nanoparticles had spherical shape with sizes ranging from 5 to 20 nm. The laser ablation and the nanoparticle forming process were discussed with explosive ejection mechanism by investigating change of surface morphology on target. The analytical results of XPS, FT-IR and Raman spectroscopy confirms that the stoichiometry and bonding properties of the hydroxyapatite nanoparticles are in good agreement with reported bulk hydroxyapatite materials.

• Composites Research
• /
• v.18 no.6
• /
• pp.48-53
• /
• 2005

In this study, to improve the ballistic efficiency of very brilliant alumina-silica armor material, forming press and sintering temperature were changed. After physical/mechanical measurement, we measured ballistic properties about KE(Kinetic Energy, L/D=10.7, tungsten heavy alloy) and HEAT(High Explosive Anti-Tank, K215) projectiles and analyzed them. As a result, in $1235^{\circ}C$, it appeared the highest ballistic efficiency about HEAT and it improved $22\%$ ballistic efficiency, better than invented alumina-silica armor material before.

• The Journal of the Korea Contents Association
• /
• v.9 no.4
• /
• pp.72-80
• /
• 2009

By the advent of an era of digital convergence, the user-friendly DTV graphic user interface (GUI) techniques become very important because of the explosive consumption of DTV receiving modules. This paper describes the design and implementation of GUI of menu-driven type for the operation of HDTV MPEG module. The designed GUI is convenient and user-friendly. Main menu is created by forming a new window and is located on the top area of the window in the structure of 1 by 3 matrix. Thus main menu, sub-manu, and lower-level menu can be displayed on a screen. The menu-driven DTV GUI was acomplished by using new styles and icons.

• 한국HCI학회:학술대회논문집
• /
• 2009.02a
• /
• pp.1321-1329
• /
• 2009

Web technology has allowed the rise of services such as blogs or YouTube that make possible the sharing of opinions, perspectives, and experiences with other users through contents. Online services that promote such sharing of information and communication are known as social media. Recently, the explosive growth of these services displays the carry-over of the natural sociality that all humans possess as social creatures. This study took an exploratory approach in investigating what influential relationships are involved in forming new relationships through sharing and participation, as sharing and participation are core keywords of social media. In order to do this, relationship formations were observed in actual usage environments with the use of the diary study method and in-depth interviews. This study sought to deduce necessary elements in relationship formations and examine the influences of weak ties on participation and sharing.

• The Journal of the Petrological Society of Korea
• /
• v.11 no.2
• /
• pp.74-89
• /
• 2002

Rock units, relating with the Guamsan caldera, are composed of Guamsan Tuff and rhyolitic intrusions. The Guamsan Tuff consists almost entirely of ash-flow tuffs with some volcanic breccias and fallout tuffs. The volcanic breccia comprises block and ash-flow breccias of near-vent facies and caldera-collapse breccia near the ring fracture. The lower ash-flow tuffs are of an expanded pyroclastic flow phase from the pyroclastic flow-forming eruption with an ash-cloud fall phase of the fallout tuffs on the flow units, but the upper ones are of a non-expanded ash-flow phase from the boiling-over eruption. The rhyolitic intrusions are divided into intracaldera intrusions and ring dikes that are subdivided into inner, intermediate and outer dikes. We compile the volcanic processes along a single cycle of cadela development from the eruptive phases in the Guamsan area. The explosive eruptions began with block and ash-flow phases from collapse of glowing lava dome caused by Pelean eruption, progressed through expanded pyroclastic flow phases and ash-cloud fallout phases during high column collapse of pyroclastic flow-forming eruption from a single central vent. This was followed by non-expanded ash-flow phases due to boiling-over eruption from multiple ring fissure vents. The caldera collapse induced the translation into ring-fissure vents from a single central vent in the earlier eruption. After the boiling-over eruption, there followed an effusive phase in which rhyolitic magma was injected and erupted to be progressively emplaced as small plugs/dikes and ring dikes with many lava domes on the surface. Finally rhyodacitic magma was on emplaced as a series of dikes along the junction of both outer and intermediate dikes on the southwestern side of the caldela.

• Journal of KIISE:Information Networking
• /
• v.31 no.6
• /
• pp.673-684
• /
• 2004

As the wireless mobile communication is being widespread, mobile technologies will have important roles in the communication with the explosive growth of demanding for wireless portable devices. Among the mobile technologies, a great deal of interest has been taken in mobile ad hoc network (MANET), which is a collection of wireless mobile nodes forming a temporary network without the aid of stationary infrastructure in recent. Furthermore, considering characteristic of ad hoc networks, the design of efficient routing protocols is an important issue. In recent years, on-demand protocols among routing protocols have noticed because of the low routing overhead. However, on-demand protocols suffer from production of the enormous query Packets by broadcasting in order to setup routes, that is, a flooding scheme. The flooding scheme is very costly and results in serious problem, which we refer as the broadcast storm problem. In this paper, we propose a Dynamic Adaptation Query flooding Using Neighbor Topology (NT-DAQ) scheme, in order to resolve the broadcast storm Problem. When a route discovery is in progress, each mobile node decides on the basis of neighbor topology information whether discovery process participates or not. Therefore, our proposed scheme enables to improve network performance in which minimize the number of query rackets. We evaluate the efficiency of our proposed scheme through simulation.