• Journal of Advanced Marine Engineering and Technology
• /
• 제36권1호
• /
• pp.64-71
• /
• 2012

An efficient cooling system is an essential part of the electronic packaging such as a high-luminance LED lighting. A special technology, Pulsating Heat Pipe (PHP), can be applied to improve cooling of a sealed, explosion-proof LED light fixture. In this paper, the characteristics of the pulsating heat pipes in the imposed thermal boundary conditions of LED lightings were experimentally investigated and a PHP device that works free of alignment angle was investigated for cooling of explosion-proof LED lights. Five working fluids of ethanol, FC-72, R-123, water, and acetone were chosen for comparison. The experimental pulsating heat pipe was made of copper tubes of internal diameter of 2.1 mm, 26 turns. A variable heat source of electric heater and an array of cooling fins were attached to the pulsating heat pipe. For the alignment of the heating part at bottom, an optimum charging ratio (liquid fluid volume to total volume) was about 50% for most of the fluids and water showed the highest heat transfer performance. For the alignment of the heating part on top, however, only R-123 worked in an un-looped construction. This unique advantage of R-123 is attributed to its high vapor pressure gradient. Applying these findings, a cooling device for an explosion-proof type of LED light rated 30 W was constructed and tested successfully.

• 한국가스학회지
• /
• 제19권6호
• /
• pp.105-109
• /
• 2015

본 연구는 해상 유류오염사고가 발생한 경우 효율적인 방재 작업을 수행하기 위하여 개발된 오일 회수장치로서, 오일 회수장치를 통하여 해상에 유출된 기름을 높은 회수율로 신속하게 처리하는 것을 목표로 한다. 오일 회수장치는 기존의 흡착포 및 유류처리제를 이용한 정화 방식에서 발생하는 2차 오염을 방지할 수 있으며 오일 회수율 또한 우수한 특징을 가진다. 또한 유증기에 의한 폭발 방지 기구를 채택하여 오일 회수 작업시 발생할 수 있는 위험 요소를 제거 하였다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1999년도 학회창립 10주년 기념 1999년도 가을 학술발표회 논문집
• /
• pp.303-306
• /
• 1999

For the purpose of Military means, explosion proof concrete, which protect the structures from the damage due to the explosion of bomb and maintain its shape, is required to develop. Therefore, in this paper, mechanical and explosionproof properties of concrete are tested under various steel fiber contents and member size. According to the experimental results, compressive, tensile and flexural strength go up with the increase of fiber contents. Energy bearing capacities is higher with the increase of fiber contents. Especially, it is confirmed that slurry infiltrated fiber concrete (SIFCON) gains in high strength and has high energy bearing capacities. SIFCON is expected to apply in the construction of explosion proof structures.

• 한국전자통신학회논문지
• /
• 제10권1호
• /
• pp.73-80
• /
• 2015

화학공장과 같이 위험지역에 설치된 밸브장치는 폭발의 위험을 방지하기 위해 방화 방폭장치로 밀폐되어 있다. 본 논문에서는 방폭장치로 인해 외부전원장치를 사용할 수 없는 밸브장치에 적외선센서와 Zigbee 센서를 이용하여 위험지역의 밸브의 열림도를 측정하여 개폐여부를 확인하고, 밸브 개폐 작동시간을 로그화하여 운전 관리자가 공장을 관리 통제할 수 있는 저전력 모니터링 시스템을 제안한다. 전력관리기능을 적용하기 위해 개선된 비동기LPL 알고리즘을 적용한 전력제어 릴레이보드를 개발하고, 이를 적용한 방폭형 지능형 밸브시스템과 공장 밸브 개폐모니터링 시스템을 설계하고 이를 구현 및 테스트 하였다.

• 한국전자통신학회논문지
• /
• 제15권2호
• /
• pp.253-258
• /
• 2020

우리나라의 석유화학산업단지는 폭발성 가스와 가연성 가스로 인하여 언제나 폭발 위험성이 높다. 이러한 폭발을 방지하기 위한 방법으로 석유화학산업단지의 대부분 설비에 방폭 성능을 요구하고 있다. 방폭용으로 현재 사용하고 있는 제어기 패널은 패널의 내부와 외부의 압력(양압)과 온도를 일정하게 유지를 위해 외부에서 수동으로 공기를 주입하는 방식을 사용하고 있다. 이에 본 논문은 자동으로 온도를 제어할 수 있도록 패널 내부의 온도에 따라 가열과 냉각을 자동으로 수행하는 자동 온도조절기를 제안한다.

• 전기저널
• /
• 6호통권162호
• /
• pp.40-46
• /
• 1990

• 화약ㆍ발파
• /
• 제40권4호
• /
• pp.1-14
• /
• 2022

화약류 간이저장소에 대한 현재의 규정이 적정한지를 검토할 목적으로 내부 폭발이 표준적인 저장소의 구조적 안정성에 미치는 영향을 FEM 해석과 현장 실험을 통해 분석하였다. 연구 결과, 에멀젼 계열 폭약 15 kg에 대한 기존 저장소 구조물의 방폭 성능이 충분하지 않은 것으로 나타났다. 따라서 여기에 대한 하나의 대안으로서 폭약을 분할하는 방법을 상정하고 순폭실험을 수행하였다. 실험을 수행한 결과, 폭약을 분할하는 방법이 예상대로 잘 작동하는 것을 확인하였으며, 시험 결과에 근거하여 적정한 분할 폭약량도 결정하였다. 또한, 저장소 구조물 상부를 개방하는 방법을 시험한 결과, 폭발압력이 신속하게 배출되어 구조물 손상이 크게 저감되는 것을 확인하였다. 이러한 구조물 형태는 화약류 간이저장소에 대한 새로운 설계기준으로 사용될 수 있을 것이다.

• 한국안전학회지
• /
• 제21권3호
• /
• pp.22-30
• /
• 2006

On this study, we developed the electrostatic eliminator for charged particles in manufacturing process. The characteristics of the electrostatic eliminator were investigated, which is two kinds. The first one is Electrical Corona Discharged Type Ionizer. The second one is Photo Ionizer in using soft X-ray. From the experiment, we have obtained the following results. In case of Electrical Corona Discharged Ionizer, neutralization efficiency of charged particles were approximately saturated to 98% over 6.0kV, but as it is non-explosion proof, can not be used in flammable particle treatment process. While in case of photo Ionizer in using soft X-Ray, neutralization efficiency of charged particles were approximately 95%, and more its structure is explosion proof, could be used in flammable particle treatment process.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제9권5호
• /
• pp.568-576
• /
• 2017

With an increase in the usage of LNG, there is a heightened interest about its safety aspects regarding the explosion of LNG carrier tank. The need for a cryogenic explosion-proof camera has increased. The camera has to work in cryogenic environment (below $-160^{\circ}C$) in LNG carrier. This study conducted design and heat transfer analysis of cryogenic camera to secure working time in limitation of heat source. The design with gap width of double pane windows was conducted based on simple vertical cavity model to insulate from cryogenic environment. The optimal gap width was 12.5 mm. For effective analysis considering convection within the camera, equivalent thermal conductivity method was adopted with ABAQUS. The working time of the camera predicted was over 10 h at warm-start condition. In cold-start condition, it required about 5 h of pre-warming time to work. The results of analysis were compared with the ones of the actual cryogenic test.

• 한국산업융합학회 논문집
• /
• 제26권5호
• /
• pp.867-874
• /
• 2023

In this paper, a wireless communication-based sensor data monitoring device with an explosion-proof (Exd IIC) case was implemented to enable installation at explosion-risk industrial sites such as plants. In existing industrial plant sites, most of the temperature sensors and vibration and impact sensors are wired up to several kilometers, which takes a lot of time and money to bury long pipes and cables. In addition, there are not many cases where some wireless devices have been applied to actual plant industry sites due to communication quality problems. Therefore, in order to solve this problem, zigbee mesh wireless communication was applied to provide high reliability wireless communication quality to industrial plant sites, and the time and cost incurred in new or additional installation of sensors could be greatly reduced. In particular, in the event of loss or error of some wireless communication devices, the communication network is automatically bypassed or recovered to enable real-time data monitoring.