• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.16 no.2
• /
• pp.54-58
• /
• 2002

PID Controller is widely used as automatic equipment for industry. However, when a system has various characters, parameter decision and tuning for accurate control is a hard task. In this paper, expert auto-tuning PID controller using PLC is presented as away of solving this problem. Expert auto tuning algorithm is based on Ziegler-Nichols step response and expert knowledge. The test of control performance is carried out in practical speed control of Induction Motor in variable load, the experimental results suggest its superior performance.

• Proceedings of the KIEE Conference
• /
• 1996.07b
• /
• pp.1189-1192
• /
• 1996

In this paper, a fault diagnosis method is proposed for self-diagnostics of PLC(Programmable Logic Controller), process controller in industrial fields, and diagnosis of its external devices such as sensors and actuators. The aim of this research is proposition of systematic method of fault diagnosis of PLC control system and development of its equipment. A PLC fault diagnosis algorithm consists of self-diagnostics given by PLC makers, Inpuot/Output tracking method by analyzing sequence PLC programs, searching method of past fault cases in database using an expert system, and diagnosis of PLC units such as CPU, DI, and DO board. Finally usability of PLC fault diagnostic system is verified by testing a MELSEC PLC.

• Proceedings of the KIEE Conference
• /
• 2000.07d
• /
• pp.2750-2752
• /
• 2000

In this paper, Intelligent PLC for automatic warehousing system is presented. Intelligent PLC is that general PLC is incorporate the knowledge and experience of Expert and control method. This system is consist of sensor part, inference part and automatic warehousing robot part. this system recognize the Work by itself and move it to the appointed place according to the inference rule. The PLC program is constructed by LD(ladder diagram). Real test system was constructed and was driven to apply this program.

• Journal of Korean Society on Water Environment
• /
• v.21 no.2
• /
• pp.132-140
• /
• 2005

The pilot test of a new alternative for small wastewater treatment system has been conducted for two years. It consists of a hybrid bioreactor and the expert system including the process control logic, PLC system, and HMI for the process automation. In order to monitor and remote control its status, the real-time data was transferred from the on-site control center to the central station via a wireless local area network. More efficient and stable performances were observed at automatic operating mode compared with the manual. On an average, COD, SS, T-N and T-P concentrations in the effluent from the hybrid bioreactor were less than 14, 7, 12 and 0.9 mg/L, respectively. According to the result from pilot tests, the quality of treated wastewater with sand filtration was enough to be utilized again.

• Journal of Technology Innovation
• /
• v.15 no.1
• /
• pp.65-86
• /
• 2007

The purpose of the current study is to suggest a reliable starting point for roadmapping to overcome two common shortcomings of previous literatures that they do not demonstrate a robust methodology for roadmap and they describe the roadmapping process in the abstract. The proposed methodology for roadmapping considers four important business- and market-related factors: consumer requirements, engineering characteristics, the gap between the roadmapped technology and competing technologies, and future changes in consumer preferences. We capture consumer preferences using conjoint analysis and interconnect the above four factors using QFD (Quality Function Deployment). The model is applied to power line communications (PLC). The results show that there is a significant difference between priorities assigned to the engineering characteristics by expert alone and priorities determined by the roadmapping model.

• Journal of Institute of Control, Robotics and Systems
• /
• v.3 no.6
• /
• pp.652-658
• /
• 1997

Coagulant feeding control is very important in the water treatment process. Coagulant feeding is related to the raw water quality such as turbidity, alkalinity, water temperature, pH and so on. However, since the process of chemical reaction has not been clarified so far, coagulant dosing rate has been decided by jar-test. In order to overcome the difficulty mentioned above, Fuzzy Neural Network to fuse fuzzy logic and neural network was proposed, and the scheme was applied to the automatic determination of coagulant dosing rate. This algorithm can automatically identify the if-then rules, tune the membership functions by utilizing expert's experimental data. The proposed scheme is evaluated by computer simulation and interfaced with coagulant feeder operated by magnetic flowmeter, control valve and PLC. It is shown that coagulant feeding according to real time sensing of water quality is very effective.

• International Journal of Ocean System Engineering
• /
• v.2 no.3
• /
• pp.185-194
• /
• 2012

A Macroscopic combination of two or more distinct materials is commonly referred to as a "Composite Material", having been designed mechanically and chemically superior in function and characteristic than its individual constituent materials. Composite materials are used not only for aerospace and military, but also heavily used in boat/ship building and general composite industries which we are seeing increasingly more. Regardless of the various applications for composite materials, the industry is still limited and requires better fabrication technology and methodology in order to expand and grow. An example of this is that the majority of fabrication facilities nearby still use an antiquated wet lay-up process where fabrication still requires manual hand labor in a 3D environment impeding productivity of composite product design advancement. As an expert in the advanced composites field, I have developed fabrication skills with the use of machinery based on my past composite experience. In autumn 2011, the Korea government confirmed to fund my project. It is the development of a composite sanding machine. I began development of this semi-robotic prototype beginning in 2009. It has possibilities of replacing or augmenting the exhaustive and difficult jobs performed by human hands, such as sanding, grinding, blasting, and polishing in most often, very awkward conditions, and is also will boost productivity, improve surface quality, cut abrasive costs, eliminate vibration injuries, and protect workers from exposure to dust and airborne contamination. Ease of control and operation of the equipment in or outside of the sanding room is a key benefit to end-users. It will prove to be much more economical than normal robotics and minimize errors that commonly occur in factories. The key components and their technologies are a 360 degree rotational shoulder and a wrist that is controlled under PLC controller and joystick manual mode. Development on both of the key modules is complete and are now operational. The Korean government fund boosted my development and I expect to complete full scale development no later than 3rd quarter 2012. Even with the advantages of composite materials, there is still the need to repair or to maintain composite products with a higher level of technology. I have learned many composite repair skills on composite airframe since many composite fabrication skills including repair, requires training for non aerospace applications. The wind energy market is now requiring much larger blades in order to generate more electrical energy for wind farms. One single blade is commonly 50 meters or longer now. When a wind blade becomes damaged from external forces, on-site repair is required on the columns even under strong wind and freezing temperature conditions. In order to correctly obtain polymerization, the repair must be performed on the damaged area within a very limited time. The use of pre-impregnated glass fabric and heating silicone pad and a hot bonder acting precise heating control are surely required.