• 대한전자공학회논문지
• /
• 제13권2호
• /
• pp.5-13
• /
• 1976

개소린 엔진 자동차의 연료절차, 공해감소, 보수경감을 목적으로 용량방전점화장치(CDI)를 해석적 및 실험적으로 설계하는 과정을 기술하였다. 특히 방전시스템에 대한 간단한 모델을 사용함으로써 점화코일의 입출력전압, 전류를 계산하였다. 그 결과 실험치와 비교하였으며 이로 부터 최적점화조건을 만족하기 위한 방전용량, SCR 및 다이오드의 정격과 DC-DC 콘버터의 소요출력전압을 결정하였다. 또 과도한 dv/dt 및 di/dt에 대한 SCR의 보호회로를 해석하고 그 결과를 관측된 결과를 관측된 결과와 비교하였는데 이로써 SCR선택과 보호회로 및 트리거 회로 설계가 용이하게 된다. 더우기 DC-DC콘버터의 거동에 대한 실험적 결과를 해석하므로써 콘버터 설계를 간이화하였다. 실용적인 CDI장치를 시작하였으며 이것은 실험실 및 노상 시험에서 만족할만한 성능을 나타냈다. 그 시험결과도 아울러 보고한다. An analytical and experimental design procedure is described for the Capacitor Discharge Ignition (CDI) System with a view to fuel saving ann reduction of gas exhaustion and maintenance need. Specifically, the input and output voltage and current of a given ignition coil were calculated by using a simplified circuit model for the discharging system. The results were compared with the experimental results, from which ratings of the charging capacitor, the SCR and the diodes and the required output valtage of the DC·DC converter were determined so as to satisfy the optimum ignition conditions. Protection circuits for excessive dv/dt and di/dt for the SCR were also analyzed and the results were compared with the observed results, which facilitate selection of the SCR and design of the protection circuit and the trigger circuit. Also, design of the DC·DC converter was simplified based on the analysis and experimental results of the behavior of the converter, An experimental, yet practical CDI system was built, which showed satisfactory performance in the laboratory and field tests. The results were also reported.

• 한국조명전기설비학회지:조명전기설비
• /
• 제9권3호
• /
• pp.73-79
• /
• 1995

This paper describes on the design considerations and analysis of moving primary-type linear induction motor for automatic conveyer system. For the study of the designed motor characteristics, calculated values obtained from the analysis using finite element method for various operation conditions are compared with the experimental results. Using the combined interactions of the thrust, the arigap flux density, and the reactive power at standstill as performance criteria, a proper ratio of the pole pitch to the effective airgap is presented for the design criterion.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2019년도 전력전자학술대회
• /
• pp.269-270
• /
• 2019

Vienna rectifier is used for telecom power applications because of its simple structure, high efficiency and high power density. This rectifier is also suitable to obtain a high voltage DC output. This paper describes the analysis and design of a single-phase module of a Vienna rectifier to obtain 750VDC output. The simulation and experimental results are provided to verify the theoretic analysis and design.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.695-700
• /
• 2008

Artificial neural network (ANN) has been extensively used in areas of nonlinear system modeling, analysis and design applications. Basically, ANN has its distinct capabilities of implementing system identification and/or function approximation using a number of input/output patterns that can be obtained via numerical and/or experimental manners. The paper describes a role of ANN, especially a back-propagation neural network (BPN) in the context of engineering analysis, design and optimization. Fundamental mechanism of BPN is briefly summarized in terms of training procedure and function approximation. The BPN based causality analysis (CA) is further discussed to realize the problem decomposition in the context of multidisciplinary design optimization. Such CA is also applied to quantitatively evaluate the uncoupled or decoupled design matrix in the context of axiomatic design with the independence axiom.

• 한국철도학회논문집
• /
• 제10권3호
• /
• pp.306-312
• /
• 2007

This paper presents the optimal design method of the train repair facility based on the simulation analysis. The train is divided into the power car, motorized car and passenger car for the simulation process analysis and train repair facility is composed of each subsystems such as a blast, dry and wash workshop. In simulation analysis, we consider the critical (dependent) factors and design (independent) factors for the optimal design. Therefore, a simulation optimization uses Evolution Strategy (ES) in order to find the optimal design factors. Experimental results indicate that simulation design factors are sufficient to satisfy the conditions of dependent variables. The proposed analysis method demonstrates that simulation design factors determined by the simulation optimization are appropriate for real design factors in a real situation and the accuracy and confidence for the simulation results are increased.

• 대한조선학회논문집
• /
• 제50권6호
• /
• pp.450-457
• /
• 2013

For the design guide of a vessel operating in cold region, numerical analysis was carried out to evaluate the weather-tight door which installed the heating cables by using ANSYS 13.0 Transient Thermal. The numerical analysis was performed by considering Advection-Diffusion equation. This study based on the experimental results of 'A study on Anti-Icing Technique for Weather-Tight Door of Ice-Strengthened Vessels'(Jeong, et al., 2011a) in KIOST. For validation of the numerical analysis results, the cold chamber experimental data measured by the heat sensors in certain location of the weather-tight door was used. The external environmental temperature which varies from $5^{\circ}C$ to $-55^{\circ}C$ was considered in numerical analysis. Also three different heating cables which have the heat capacity of 33W/m, 45W/m and 66W/m were adapted for the design parameters to be the most efficient and guidelines for anti-icing design of the weather tight door.

• 한국소음진동공학회논문집
• /
• 제14권6호
• /
• pp.470-477
• /
• 2004

This study shows the design process of a MR damper for semi-active suspension systems. Damping force characteristics of the designed damper was predicted through the flow analysis and magnetic analysis. The predicted results were compared with the experimental results and the initial design specification was modified according to the results.

• Nuclear Engineering and Technology
• /
• 제55권9호
• /
• pp.3164-3182
• /
• 2023

The CRUD on the fuel cladding under the pressurized water reactor (PWR) operating condition causes several issues. The CRUD can act as thermal resistance and increases the local cladding temperature which accelerate the corrosion process. The hideout of boron inside the CRUD results in axial offset anomaly and reduces the plant's shutdown margin. Recently, there are efforts to revise the acceptance criteria of emergency core cooling systems (ECCS), and additionally require the modeling of the thermal resistance effect of the CRUD during the performance analysis. There is an urgent need for the evaluation of the effect of the CRUD deposition on the cladding heat transfer under PWR operating conditions, but the experimental database is very limited. The experimental facility called DISNY was designed and constructed to analyze the CRUD-related multi-physical phenomena, and the performance analysis of the constructed DISNY facility was conducted. The thermal-hydraulic and water chemistry conditions to simulate the CRUD growth under PWR operating conditions were established. The design characteristics and feasibility of the DISNY facility were validated by the MARS-KS code analysis and separate performance tests. In the current study, detailed design features, design validation results, and future utilization plans of the proposed DISNY facility are presented.

• 전자공학회논문지A
• /
• 제31A권3호
• /
• pp.77-86
• /
• 1994

A New environment SENSATION for circuit optimization and statistical analysis has been developed. It provides real time simulation and includes automatic algorithms to assist for reaching optimal solution. Furthermore, statistical analysis environment is presented which aids in Monte Carlo analysis. worst case corner analysis, and sensitivity analysis. These capabilities faciliate the characterization of the effects of several operating conditions and manufacture process paramenters on the design performances. We verify that the proposed methods can obtain the optimal solution of the objective function through several experimental results.

• Structural Engineering and Mechanics
• /
• 제66권4호
• /
• pp.423-438
• /
• 2018

This pioneer study focuses on finite element modeling and numerical modeling of three types of Reinforced Concrete Haunched Beams (RCHBs). Firstly, twenty RCHBs, consisting of three types, and four prismatic beams which had been tested experimentally were modeled via a nonlinear finite element method (NFEM) based software named as, ATENA. The modeling results were compared with experimental results including load capacity, deflection, crack pattern and mode of failure. The comparison showed a good agreement between the results and thus the model used can be effectively used for further studies of RCHB with high accuracy. Afterwards, new mechanism modes and design code equations were proposed to improve the shear design equation of ACI-318 and to predict the critical effective depth. These equations are the first comprehensive formulas in the literature involving all types of RCHBs. The statistical analysis showed the superiority of the proposed equation to their predecessors where the correlation coefficient, $R^2$ was found to be 0.89 for the proposed equation. Moreover, the new equation was validated using parametric and reliability analyses. The parametric analysis of both experimental and predicted results shows that the inclination angle and the compressive strength were the most influential parameters on the shear strength. The reliability analysis indicates that the accuracy of the new formulation is significantly higher as compared to available design equations and its reliability index is within acceptable limits.