• The Journal of Korean Academic Society of Nursing Education
• /
• v.21 no.1
• /
• pp.95-107
• /
• 2015

Purpose: The purpose of this study was to develop a tailored simulation learning (SL) program and to evaluate the effects of the program on the clinical competency, clinical decision-making competency, and communicative competency of new nursing staffs in intensive care units (ICU) and emergency rooms (ER). Methods: In this quasi-experimental study, fifteen nurses were assigned to the experimental group and fifteen to the control group. The experimental group was given the SL program of four sessions, whereas the lectures of four sessions were given to the control group. Data were analyzed using a $x^2$-test, Mann-Whitney U test, and Kruskal-Wallis test with an SPSS program. Analysis of covariance was used to treat the covariate of pre communicative competency between the experimental and control groups. Results: Based on the education needs of new nursing staffs in ICUs and ERs, three learning scenarios and one evaluating scenario were developed for the SL program. The score for clinical competency, clinical decision-making competency, and communicative competency were significantly higher in the experimental group compared with the control group. Conclusion: The SL program is an effective learning strategy for new nursing staffs in ICUs and ERs. These findings suggest that an SL program be offered as an alternative for new nurse orientation and continuing nurse education.

• Fire Science and Engineering
• /
• v.33 no.4
• /
• pp.50-58
• /
• 2019

The prediction performance of B-RISK was evaluated for the fire behaviors of combustibles in a compartment using Fire Dynamics Simulator (FDS). First of all, to predict the heat release rate (HRR) for two combustible sets, the HRR for one combustible set and the design fire curve were used as input values for B-RISK. Comparing results of B-RISK calculations with experimental data for two combustible sets, it was found that B-RISK results predicted insufficiently for fire growth rate of experimental data but there was good agreement for maximum HRR and total HRR with the experimental data. And the B-RISK results were used for input values of FDS to evaluate the fire behaviors of B-RISK results. Comparing results of FDS calculations with experimental data, the simulation results showed that the temperature and concentrations of O₂, CO₂ in the fire growth phase were different from the experimental data. However, when using the B-RISK result for percentile 70%, the simulation results sufficiently predicted the overall fire behaviors.

• The Korean Journal of Applied Statistics
• /
• v.28 no.5
• /
• pp.1035-1046
• /
• 2015

Variance components models incorporate various random factors in the form of linear models. There are two experimental Layouts for the classification of factors under variance components models: nested classification and crossed classification. We consider two-way variance components models and investigate the effect of experimental Layout on the performance of model selection criteria AIC and BIC. The effect of experimental Layout is studied through a simulation study with various combinations of parameters in a systematic fashion. The simulation study shows differences in performance of model selection methods between the two classification. There is a particular tendency to prefer the smaller model than the true model when the variance component of a nested factor becomes relatively larger than a nesting factor that is persistent even when the sample size is not small.

• Earthquakes and Structures
• /
• v.4 no.1
• /
• pp.41-62
• /
• 2013

A comprehensive experimental program of cyclic tests on 1:3-scale models of bridge piers is going to be carried out at the Laboratory of Structures and Materials of the University of Basilicata. The testing models include eight RC single shaft piers with hollow circular cross section. Four piers have been realised using corroded steel rebars. In this paper, the results of preliminary numerical simulation analyses of the cyclic behaviour of the piers, carried out with Opensees using fiber-based models, are presented. Pull-out and lap-splice effects of steel rebars have been taken into account in the numerical analyses. First, the experimental specimens and the test set up are presented. Next, the results of the numerical analyses are discussed. In the numerical analyses, different configurations and levels of corrosion have been considered. The effective stiffness and equivalent damping of the piers is reported as a function of pier ductility and pier drift.

• Transactions of Materials Processing
• /
• v.17 no.7
• /
• pp.511-516
• /
• 2008

A drawbead die for the experimental determination of drawbead forces was newly introduced in this paper. While the conventional Nine's drawbead die inevitably includes effects of a blank holding force on the measured drawbead forces, the new drawbead die excludes it by removing the blank holder contact in the dieface. Therefore, the new drawbead die can provide more realistic drawbead forces without considering somewhat arbitrary effect of blank holder with the computational procedure of forming process. The drawbead opening force and restraining force obtained by adopting the two experimental dies were compared for the validation of accuracy in the FEM simulation of automotive fender forming process. The compared section strains and draw-ins confirmed that the present drawbead die provides better drawbead forces for an accurate FEM simulation of sheet metal forming process.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.2
• /
• pp.151-160
• /
• 2000

An experimental and theoretical analysis for the improvement of dynamic characteristics and design of electro-hydraulic flow control servo valve are performed. The theoretical results are compared with the experimental step responses, and the important design parameters of an electro-hydraulic flow control servo valve are derived by using the simulation program. Simulation parameters of nozzle jet coefficient and orifice and spool valve discharge coefficient are given through experiment. The theoretical and experimental step response curves show that the valve gain depends on the fixed orifice and nozzle $ratio(R_on)$ and is maximum at $R_on=1.$ And drain orifice in the flapper - nozzle return line creates a small back pressure, which improves the performance fur the valve.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.19 no.4
• /
• pp.424-434
• /
• 2016

A few blast experiments are conducted to investigate the behavior of one-way reinforced concrete(RC) slabs under blast loading. Reflected blast characteristics as well as displacements and damage patterns of RC slabs are measured. Numerical models are also established in the software ANSYS AUTODYN to reproduce the experiments on RC slabs. The numerical models are distinguished from each other by different boundary conditions at the edges of RC slabs, which are assumed to reproduce displacements and damage patterns resulted from the experiments. The boundary condition of the experimental tests is estimated from the numerical simulation results. From the numerical simulation results, the boundary condition should be improved in order to measure the accurate maximum displacement in the experimental tests.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.700-705
• /
• 2007

In this study, we observe the application of shape memory alloy(SMA) into smart structures for repeatable actuation, because SMA changes its material properties and characteristics progressively under cyclic loading conditions and finally reaches stable path(state) after a certain number of stress/temperature loading-unloading cycles, so called 'training'. In this paper, SMA wires that have been in a stable state through the training are used. Stress-strain curve of the SMA wire at different temperature levels are measured. In addition, we observe other important effects such as the rate effect according to strain rates for rapid actuation response. The current work presents the experimental test using SMA wire after training completion by mechanical cycling. Through these tests, we measure the characteristics of SMA. With the estimated SMA properties and effects, we compare the experimental results with the simulation results based on the SMA constitutive equations.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.7 no.6
• /
• pp.165-173
• /
• 1999

HILS system consists of hardwares which are engine and dynamometer and softwares which is vehicle model without the engine. It is well-known that because of engines's nonlinearity it is difficult to describe an engine exactly and not to lose it reality coincidently. But HILS system is the high technology that can compensate this weakness by using a real engine instead of model. The various experiments regarding the ACC which are not normally available for real vehicle tests have been performed by the HILS system. From the results , the HILS system is expected to decrease the experimental accident rate and save costs and time. Compared with simulation, HILS experimental results show similarities and expected to increase road capacity.

• Journal of the Korean Society of Combustion
• /
• v.16 no.4
• /
• pp.8-15
• /
• 2011

The present study investigates the combustion phenomena in a sludge incinerator using experimental and numerical method. The temperature and gas concentration were measured at 33 points during operation of the incinerator in order to assess the mixing and combustion characteristics. Numerical simulation was also carried out using a commercial CFD code. Simplified inlet conditions were introduced in oder to predict the bulk solid combustion and the diffusion of the volatile matter released by pyrolysis of sludge. The experimental results showed that the combustion process is extremely inhomogeneous. Large variations were observed in the temperature and gas concentrations in the freeboard of the incinerator due to poor mixing performance between the air and the combustibles, which is caused by massive and bulk generation of volatile matter by fast pyrolysis of sludge particles. The boundary condition of the CFD simulation was found effective in predicting the poor mixing and combustion performance of the reactor.