• Journal of Korean Society of Forest Science
• /
• v.107 no.3
• /
• pp.287-293
• /
• 2018

This study was carried out to provide surface bearing capacity reinforcement of forest road by sub-base facilities based on a soft ground use of geosynthetics to prevent the damage of the road surface passing heavy logging trucks and to pass smoothly heavy truck against growing timber harvesting. The analysis of the road surface bearing capacity as progressing time and the increase of the number of passage of heavy logging trucks were conducted experimental section of forest road on the soft ground in the Forest Technology and Management Research Center. As a result, it was found that the road surface bearing capacity were stabilized at CBR of 15% or more, the effect of reinforcement by type of geosynthetics showed no significant difference after the lapse of about 1 year. After reaching the passage of 300 times for the heavy logging trucks on the sub-base construction section, the settlements was stabilized below the allowable standard of 50 mm, road surface bearing capacity also improved to more than CBR 20% and there was no significant difference in the thickness of the sub-base. However, in the section where the sub-base is not constructed, it is found that the lack of surface bearing capacity with the settlements more than the allowable standard is not possible to pass the heavy logging trucks. Therefore, in order to reinforce the road surface bearing capacity of the soft ground for the passage of the heavy logging trucks, it is necessary to construct a sub-base of at least 0.2 m when using geosynthetics.

• Korean Journal of Construction Engineering and Management
• /
• v.13 no.2
• /
• pp.58-69
• /
• 2012

In modern society, rooftops and underground spaces are utilized for overcoming a confined space limitation of metropolitan areas. Therefore, floor covering construction is also increasing steadily. From the user's viewpoint, skid resistance performance of floor covering methods is a very important performance criterion for safety and amenity, but an appropriate design and assessment criteria for skid resistance performance are not available. This study presents the skid resistance performance assessment method of floor covering methods considering the sidewalk skid resistance standard of Seoul city and the guideline of the Ministry of Land, Transport and Maritime Affairs(MLTM) of Korea for road safety facilities'installation and maintenance. For this research, three alternatives among urethane floor covering methods are selected and their skid resistance performance is analyzed through an experimental study. The analyzed performance is also evaluated by the skid resistance performance assessment method. Finally, the comprehensive performance assessment including the results of skid resistance performance assessment is conducted by Value Analysis(VA) in order to encourage the construction methods of floor covering which have a high skid resistance performance. As a result of VA, the particle method which the skid resistance performance is improved up to four times more than other alternatives shows the highest performance index of 83.86.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.18 no.5
• /
• pp.419-429
• /
• 2016

In a bid to avoid the economic loss resulting from traffic jam in urban area, a deep underground road at 40 m depth has been considered and the first class disaster prevention facilities shall be applied according to domestic guideline. Automatic-monitoring fire extinguishing system designed to use for fire fighting has been widely applied at home and abroad. Recently development and commercialization through theoretical and experimental research to apply to road/railroad sector have been underway. Based on such performance of automatic fire extinguishing system, technical/economic analysis of existing water spray systems was conducted and as a result, it has demonstrated the superiority in terms of fire suppression as well as in cost efficiency. Then to commercialize this system, more diverse studies that will incorporate the characteristics of domestic tunnels are needed and should the system be promoted through institutional improvement, it's expected to become one of the advanced nations with own original technology in a life safety system industry throughout the world.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.17
• /
• pp.7105-7112
• /
• 2014

In this study, we investigated oxidative stress and tumor marker levels of polycyclic aromatic hydrocarbons (PAHs) in 136 coke oven workers and in 60 control subjects, and evaluated the correlation between oxidative stress and tumor marker levels. Questionnaires on basic demographic information were also administered. Significant differences in employment time and percentages of alcohol drinkers were observed between the control and exposed groups. PAH exposure was assessed using urinary 1-hydroxy-pyrene (1-OHP) levels and was found to be significantly higher in workers than in the controls. Significant differences (P<0.001) of MDA, GST, LDH, NSE, Cyfra21-1, and of SCC and TNF-a (P<0.0001 and P<0.05, P<0.001, respectively) levels were observed among controls and coke-oven workers, except for bottom coke oven workers. Associations between age and risk of increased TNF-a, smoking and increased GST activities, and drinking with increased MDA concentrations, were marginal (P=0.055, P=0.048, P=0.057, respectively). The association between smoking with MDA (P=0.004), NSE (P=0.005), SCC (P=0.004) andTNF-a (P<0.001), and drinking with TNF-a levels was significant (P=0.012). In addition, a significant positive correlation between oxidative stress and tumor markers was found in the present study. These results suggest that a synergistic increase of oxidative stress and tumor markers induced by PAHs may play a role in toxic responses for PAHs in coke oven workers.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.29 no.5
• /
• pp.397-403
• /
• 2016

During the rapid economic growth in Korea since the 1970s, many underground facilities were constructed such as under passes and railways. Seismic design has been mandated in 1988, but the structures built before 1988 were not reflected on the seismic design. Accordingly, these underground structures require effective seismic reinforcing methods to ensure safety when the earthquake happens. By these reasons, in this study, using the proposed pre-flexed members, RC box structure was analyzed for seismic reinforcement of the corner. This method is based on a principle that enlarging the resistance against the external force by installing the pre-flexed member to the box structure corner. To evaluate validity, a newly developed member with CornerSafe was compared with traditional type reinforcement using experiments and finite element analysis. In finite element mode, nonlinearity of steel was modeled based on J2 plasticity model and concrete was based on CEB FIP MODEL CODE 1990. Also, composite ratios of box and pre-flexed member were computed for design application. The reinforcement and box structure were analyzed under the bond condition completely attached by the tie, and the results of experiment and finite element analysis were same in the force-displacement curve.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.7 no.6
• /
• pp.101-108
• /
• 2003

Small-scale models have been frequently used for experimental evaluation of seismic performance because of limited testing facilities and economic reasons. However, there are not enough studies on similitude law for analogizing prototype structures accurately with small-scale models, although conventional similitude law based on geometry is not well consistent in the inelastic seismic behavior. When fabricating prototype and small-scale model of reinforced concrete structures by using the same material. added mass is demanded from a volumetric change and scale factor could be limited due to size of aggregate. Therefore, it is desirable that different material is used for small-scale models. Thus, a modified similitude law could be derived depending on geometric scale factor and equivalent modulus ratio. In this study, compressive strength tests are conducted to analyze equivalent modulus ratio of micro-concrete to normal-concrete. Equivalent modulus ratios are divided into multi phases, which are based on ultimate strain level. Therefore, an algorithm adaptable to the pseudodynamic test. considering equivalent multi-phase similitude law based on seismic damage levels, is developed. In addition, prior to the experiment. it is verified numerically if the algorithm is applicable to the pseudodynamic test.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.26 no.3
• /
• pp.5-14
• /
• 2018

This study investigated the effect of concentrate of membrane filtration of sewage reuse facilities on bioreactor's microorganisms in sewage treatment facility, and concentrate was analyzed, oxygen uptake rate and continuous activated sludge experiment were performed. As a results, the concentration of organic matter and TP concentration in concentrate was closely related to the concentration of SS and the concentration of ionic substances in concentrate was higher in order of $Cl^-$ > $Na^+$ > $Ca^{2+}$ > $K^+$ > $Mg^{2+}$ > $F^-$. And the analysis value of analytical items was greatly fluctuated according to sampling time of concentrate. Result of OUR test according to the mixing ratio of concentrate to sewage, it was found that the concentrate acts as an organic matter in the activated sludge microorganism and it increases with the increase of the concentrate mixing ratio. As a result of continuous activated sludge experiment, MLSS concentration, organic removal efficiency and TN removal efficiency gradually decreased with increasing concentrate mixing ratio. Based on the experimental results, expected mixing ratio of concentrate to affect the treatment efficiency of activated sludge is 25%.

• Archives of design research
• /
• v.14
• /
• pp.163-178
• /
• 1996

"Color" education aimed at cultivating creativeness and expressive techniques in the education of visual art, in the college of art and design, should be balanced with "form" education; nevertheless, the present situation at Korean universities is such that the overall environments of "color" education are far too inferior to those of "form" education.The problem is, among other things, that the curriculum of visual art education is centered around formal education; in addition, color education courses consist mostly of theoretical issues, not experimental, first-hand-experience-oriented activities that are best suited for the characteristics of the language of color as a visual language, thereby making it difficult to expect the efficiency of education.Particularly, it is a serious problem that the courses dealing with color are not offered in a step by step fashion, from the most elementary, to the intermediate, working up to the most advanced level. Another problem is that those people involved in color education seldom have an expertise in their area; furthermore, the educational environment, educational tools, and the content of the texbooks are far from being ideal.Moreover, it is a grim reality that most color theory courses that have been offered end up being a lecture of "general, basic" color theories, ignoring the students' diverse specialization areas.As a way of normalizing color education, rationalizing the curriculum and initiating the professorship exclusively teaching color education have to be introduced, so that we can increase the depth of color education and individualize the contents of color education according to the students' needs. It is believed that the introduction of the "color-education-only" professorship will greatly facilitate our effort to devise an efficient educational method, to determine the scope of individualized color education, and to improve the ovarial educational environment (such as facilities, instruments, and teaching materials) necessary for an in-depth education.ments, and teaching materials) necessary for an in-depth education.

• Korean Security Journal
• /
• no.17
• /
• pp.361-381
• /
• 2008

Quality rating of machine security systems is difficult because both tangible and intangible services are included. However, still, the research template applied the SERVQUAL model with the intention of confirming machine security systems' service quality formation and experimentally inspecting the relationship between service quality and customer satisfaction. Therefore, the following highlights the experimental research outcomes and their implications for small-scale businesses utilizing machine security systems in the Daegu region. First, after observing whether the determining factors constitute service quality, four components were found to have significant influence on customer satisfaction. Additionally, in observing any differences in their influences, the following in order were observed as having influence on customer satisfaction: empathy, assurance reliability, responsiveness, and tangibility. Moreover, though companies‘ newest facilities and equipment are important, it can be concluded that a company employees’ prudent consideration, individual interest, reliability, and assurance for the customer carry greater importance. Secondly, though we intended to survey machine security systems by employing the SERVQUAL model, determinant factor analysis results found applying SERVQUAL model in its original state a challenge. According to results from determinant factor analysis, the basis for forming service quality is determined by assurance reliability, empathy, tangibility, and responsiveness. Furthermore, in future research, while more accurately distinguishing between assurance and reliability, a more appropriate model must also be considered for modification in domestic machine security system industry‘s service quality evaluation.

• Journal of Biosystems Engineering
• /
• v.38 no.4
• /
• pp.306-311
• /
• 2013

Purpose: With the ever-rising energy prices, thermal energy heavily consuming facilities of the agricultural sector such as commercialized greenhouses and large-scale Rice Processing Complexes (RPCs) need to cut down their energy cost if they must run profitable businesses continually. One possible way to reduce their energy cost is to utilize combustible agricultural by-products or low-price oil instead of light oil as the fuel for their boiler systems. This study aims to analyze the heavy oil combustion characteristics of a newly developed hot water boiler system that can use both rice husk and heavy oil as its fuel convertibly. Methods: Heavy oil combustion experiments were conducted in this study employing four fuel feed rates (7.6, 8.5, 9.5, 11.4 $l/h$) at a combustion furnace vacuum pressure of 500 Pa and with four combustion furnace vacuum pressures (375, 500, 625, 750 Pa) at fuel feed rates of 9.5 and 11.4 $l/h$. Temperatures at five locations inside the combustion furnace and 20 additional locations throughout the whole hot water boiler system were measured to ascertain the combustion characteristics of the heavy oil. From the temperature measurement data, the thermal efficiency of the system was calculated. Flue gas smoke density and concentrations of air-polluting components in the flue gas were also measured by a gas analyzer. Results: As the fuel feed rate or combustion furnace vacuum pressure increased, the average temperature in the combustion furnace decreased but the thermal efficiency of the system showed no distinctive change. On the other hand, the thermal efficiency of the system was inversely proportionally to the vacuum level in the furnace. For all experimental conditions, the thermal efficiency remained in the range of 80.1-89.6%. The CO concentration in the flue gas was negligibly low. The NO and $SO_2$ concentration as well as the smoke density met the legal requirements. Conclusions: Considering the combustion temperature characteristics, thermal efficiency, and flue gas composition, the optimal combustion condition of the system seemed to be either the fuel feed rate of 9.5 $l/h$ with a combustion furnace vacuum pressure of 375 Pa or a fuel feed rate of 11.4 $l/h$ with a furnace vacuum pressure between 500 Pa and 625 Pa.