• Journal of Engineering Education Research
• /
• v.23 no.3
• /
• pp.32-40
• /
• 2020

A new moment of inertia experiment apparatus different from the existing one has been developed, which does not require deformation of a sample in order to fix it to the apparatus. This new experiment apparatus was able to experiment with constant-shaped objects that did not deform the samples, so that it enabled them for conducting an experiment which is close to an ideal rigid model dealt in the general physics course. The new experimental apparatus was easy and accurate in measuring the physical quantity by using the experimental principle of physical pendulum. In the results of the measurement of the moments of inertia of the six samples, all measurements were made to be accurate enough to measure with very small errors within 1%. In addition, it has been found to be useful as an experiment apparatus to understand the concept of the moment of inertia and to prove the formula for moment of inertia. Therefore, if the new moment of inertia experiment apparatus developed in this study is used in students' experiments, it is expected that students will be able to greatly increase their understanding of the concept of moment of inertia.

• Applied Microscopy
• /
• v.21 no.1
• /
• pp.86-107
• /
• 1991

An experimental study was performed to observe the early effects of monocrotaline on pulmonary vascular system by means of light microscopy and scanning electron microscopy, attempting to expore the mechanism behind the process of pulmonary hypertension. Experimental animal(Sprague-Dawley male rats ; 150-200g B. W.) were intra-peritoneal administered with 100mg/kg B. W. monocrotaline. Authors observed light microscopically various gradational increase of wall thickness in pulmonary muscular and non-muscular arteries in duration from 2 weeks to 5 weeks after monocrotaline administration and the changes were more sever in the latter than the former. The scanning electron microscopy shows severe and diffuse endothelical cell swelling, microvilli and microbleb formation since 1 hour after monocrotaline administration and during the course, after 5 hours the severity of endothelial cell damage was prominent with presence of fibrin, webs, platelet thrombi and white cell adherence. It was concluded that the monocrotaline primarily induced severe and diffuse endothelial cell damage of pulmonary arteries and laterly added the participation of platelets, which attributed to the pathogenesis of monocrotaline induced pulmonary vascular lesions in relation to pulmonary hypertension.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.4 no.4
• /
• pp.488-503
• /
• 2012

The stern boat deployment system was investigated to evaluate the capability of launching and recovering rigid hull inflatable boat (RHIB) via the stern ramp. The main parameters to launch and recover RHIB were tested at the design stage. The combined hydrodynamic effect of the stern wake and the water jet flow made it difficult to maintain the maneuvering and sea-keeping ability of RHIB approaching to the stern ramp. The safe recovery course was proposed to maintain the directional control of RHIB and to reduce the combined hydrodynamic effect in the transom zone. To evaluate the feasibility of RHIB recovery, the stern sill depth was measured in various conditions and the ramp availability time was obtained. Also, the experimental percent time operability (PTO) test was performed by the number of successive launching and recovering operations.

• Journal of Korean Physical Therapy Science
• /
• v.15 no.3
• /
• pp.65-72
• /
• 2008

Background : The purpose of present study was to investigate the effect of quadriceps femoris taping in normal gait using 3D motion capture technique. Method : Twenty healthy volunteers, have no musculoskeletal problems, were recruited as subjects for this study. In experimental group, 20 healthy young(males 10 and females 10) were included. The subjects were assessed during two conditions: control tape(no muscle stretched) and quadriceps (muscle stretched)taping application. To obtain the dynamic data, we captured the motion of subject attached markers without taping during repeated gaits five times or more in 7 m Capture volume of gait analysis center. The result was obtained as a mean value in three times. After taping on quadriceps femoris, the same procedure was carried out. Statistical analysis were performed using statistical software packagess SPSS WIN 12.0(SPSS, Chicago, IL, USA). Differences were tested for statistical significance using paired t-test, independent t-test, chi-squared test for comparisons between the muscle stretched and no muscle stretched. Results : The date of 20 subjects who carried out the whole experimental course were statistically analyzed. 1. gait velocity was showed that muscle stretched group had more significantly increased than no muscle stretched group(p<.05). 2. step length was showed that muscle stretched group had more significantly increased than no muscle stretched group(p<.05). 3. cadens was showed that muscle stretched group had more significantly increased than no muscle stretched group(p<.05). Conclusion : kinesio taping on quadriceps femoris promoted cadence, gait velocity, step length in normal subject (muscle stretched) group.

• Journal of Power Electronics
• /
• v.14 no.5
• /
• pp.1069-1078
• /
• 2014

This study presents the design and implementation of a web-based remote laboratory for a multi-mode single-leg power converter, which is a topic in advanced power electronics course. The proposed laboratory includes an experimental test rig with a multi-mode single-leg power converter and its driver circuits, a measurement board, a control platform, and a LabVIEW-based user interface program that is operated in the server computer. Given that the proposed web-based remote laboratory is based on client/server architecture, the experimental test rig can be controlled by a client computer with Internet connection and a standard web browser. Although the multi-mode single-leg power converter can work at four different modes (main boost, buck-boost, boost-boost, and battery boost modes), only the buck-boost mode is used in the experiment because of page limit. Users can choose the control structure, control parameters, and reference values, as well as obtain graphical results from the user interface software. Consequently, the feedbacks received from students who conducted remote laboratory studies indicate that the proposed laboratory is a useful tool for both remote and traditional education.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.11 no.2
• /
• pp.1-6
• /
• 1974

The three-dimensional correction factor of the added mass of finite-length elliptic cylinders in vertical vibration in a free surface was calculated. This problem has already been dealt by T. Kumai[5] to contribute to analytical prediction of the three-dimensional correction factor for the added mass in vertical vibration of ships. In Kumai's work, the body boundary condition involved in the appropriate boundary value problem was approximately treated in the course of obtaining the solution. In this work, obtaining the solution derived from mathematically exact treatment of the body boundary condition, the author recalculated the three-dimensional correction factor for length-beam ratio $4{\sim}8$, beam-draught ratio $2.00{\sim}4.50$ and number of nodes from 2 to 7. And the numerical results were compared with both Kumai's results and the author's experimental data for two and three-noded vibrations of the cylinder of beam-draught ratio 2.40 The comparison of the numerical results shows that the author's are always higher than the Kumai's as expected. And the comparison of the numerical results with experimental data shows that the Kumai's numerical results have less deviation in case of two-noded vibration, and that, in case of three-noded vibration, the author's numerical results are in fairly good correspondence.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2002.03a
• /
• pp.445-452
• /
• 2002

In the field of civil and geotechnical engineering, students conduct a variety of soil tests to fulfill undergraduate soil mechanics course requirement. There is a range of problems in soil laboratory instruction, such as, some students not getting hands on experience of conducting tests because of inadequate number of apparatus, time constraints and inability in exciting students to seriously conduit the experiments, However when these laboratory soil tests are simulated with multimedia interaction ann visualization techniques, the students conceptual understanding of soil mechanics is enhanced. The simulation program for website teaching is a computer based instructional package intended to complement, and potentially replace, some physical testing in a real soil laboratory. The overall aim of this project is to develop an experimental simulation program toward active learning and development of critical thinking skills, including data interpretation, understanding of the precesses and influential factors, and problem solving. Therefore enable students to access website to team experimental procedure at any time or place.

• Nuclear Engineering and Technology
• /
• v.49 no.3
• /
• pp.466-475
• /
• 2017

Coolant mixing under natural circulation flow regime constitutes a key parameter that may play a role in the course of an accidental transient in a nuclear pressurized water reactor. This issue has motivated some experimental investigations carried out within the OECD/NEA PKL projects. The aim was to assess the coolant mixing phenomenon in the reactor pressure vessel downcomer and the core lower plenum under several asymmetric steady and unsteady flow conditions, and to provide experimental data for code validations. Former studies addressed the mixing phenomenon using, on the one hand, one-dimensional computational approaches with cross flows that are not fully validated under transient conditions and, on the other hand, expensive computational fluid dynamic tools that are not always justified for large-scale macroscopic phenomena. In the current framework, an unsteady coolant mixing experiment carried out in the Rossendorf coolant mixing test facility is simulated using the three-dimensional porous media capabilities of the thermal-hydraulic system CATHARE code. The current study allows highlighting the current capabilities of these codes and their suitability for reproducing the main phenomena occurring during asymmetric transient natural circulation mixing conditions.

• The Journal of Korean Academic Society of Nursing Education
• /
• v.29 no.4
• /
• pp.427-439
• /
• 2023

Purpose: This study aimed to evaluate the effects of a nursing education program for hyperglycemia patient care using standardized patients. Methods: This study used a nonequivalent control group pre-test and post-test non-synchronized design. A total of 50 senior university nursing students who had completed an adult nursing course participated in this study (experimental group, n=24; control group, n=26). This nursing education program was developed according to the stages of analysis, design, development, implementation, and evaluation. The collected data were analyzed using χ² -test, Fisher's exact test, independent t-test, paired t-test, and repeated measure ANOVA. Results: Significant differences were shown between the experimental and control groups in clinical performance ability (F=277.41, p<.001), communication skills (F=47.18, p<.001), self-efficacy (F=3.81, p=.031), and learning satisfaction (t=2.25, p=.033). Problem-solving ability was not statistically significant between the groups. Conclusion: The nursing education program for hyperglycemia patient care using standardized patients was effective in improving nursing students' clinical performance ability, communication skills, and learning satisfaction. Therefore, it is proposed that the education program developed in this study be used as part of an education program to enhance nursing students' abilities in caring for hyperglycemia patients.

• The Journal of Korean Academic Society of Nursing Education
• /
• v.17 no.3
• /
• pp.454-463
• /
• 2011

Purpose: The purpose of this study was to examine the effects of a hospice and palliative care education program including meaning in life on attitudes to end-of-life care and meaning in life for nursing students. Methods: This study used a quasi-experimental and non- synchronized with a non-equivalent control group design. The experimental group (n=28) participated in a hospice and palliative care education program including meaning in life. The control group (n=28) participated only in a hospice and palliative care education program. The 30-hour course examined hospice and palliative nursing care and logotherapy. Data were collected using a structured questionnaire consisting of general characteristics, attitudes to end-of-life care, and meaning in life. Collected data were analyzed for frequency, percentage, ${\chi}^2$-test, and t-test using SPSS 19.0 WIN Program. Results: Scores for the attitude towards end-of-life care in the experimental group were significantly higher than in the control group. The meaning in life scores in the experimental group were significantly higher than in the control group. Conclusion: These findings suggest that the hospice and palliative care education program, including meaning in life, was effective in enhancing the attitude to end-of-life care and meaning in life among nursing students.