• Transactions of the Korean Society of Automotive Engineers
• /
• v.13 no.1
• /
• pp.166-173
• /
• 2005

A vehicle stability control logic for 4WD hybrid electric vehicle is proposed using the regenerative braking of the rear motor and electronic brake force distribution module. Performance of the stability control logic is evaluated for J-turn and single lane change. It is found from the simulation results that the regenerative braking at rear motor is able to provide improved stability compared with the vehicle performance without my stability control. Additional improvement can be achieved by applying the regenerative braking plus electronic brake farce distribution control. It is expected that the regenerative braking offers additional improvement of the fuel economy as well as the vehicle stability control.

• Analytical Science and Technology
• /
• v.8 no.4
• /
• pp.779-786
• /
• 1995

Environmental and industrial aerosols can be analyzed on-line by laser plasma spectroscopy. The main problem in direct (no preparation or presorting) aerosol analysis is the extensive spectral fluctuations. A method to partially solve this problem is proposed. It is based on single shot measurements and application of a special rejection algorithm. The major factors that influence the spectral variations are discussed, in relation to the correction possibility by a rejection program. The method works well when average intensity of the single spectra is relatively high, as compared to detector's saturation limit. If intensities are too low, the accumulation of readout noise is critical, and no improvement is expected.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.25 no.2
• /
• pp.45-57
• /
• 2007

Properties of newly developed paper from Red Algae Pulp (RAP) were examined. The paper samples were prepared according tomixing RAP fiber with wood fibers, HwBKP and SwBKP, to form a paper with $60\;g/m^2$ in weight. It was prepared in three to four different levels of refining degree and pressure so that it can reveal different bulk level in order to clearly compare the opacity at equivalent bulk for each furnish compositions. printability of RAP fiber revealed superior effect on print through repression and initial ink absorption. Those properties are expected to improve further if printability improvement effect due to smoothness improvement is added.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2016.05a
• /
• pp.245-246
• /
• 2016

The condensation performance evaluation is required for improved living environment of apartment housings. In the current condensation performance evaluation process, high demand of manual works and repetitive process cause unexpected risks due to uncertainty and inefficiency by applying 2D CAD drawings in simulation tool. Furthermore, the evaluation requires taking in action responding to the expanding use of BIM. In this study, the analysis of current evaluation process and required functions for the process improvement based on BIM modeling were deducted from interviews with experts. It is expected that the results of this study can be employed to develop of process automation module for condensation simulation evaluation.

• KIEAE Journal
• /
• v.7 no.3
• /
• pp.81-88
• /
• 2007

As of August 2005, there are 9,007 facilities for public primary, middle and high schools in Korea. But because of depopulation, hereafter it is expected to allocate much more budget and interest to utilizing the existing facilities reasonably rather than new buildings construction. At present the maintenance of educational facilities is depend on not a preventive but a post preservation. And there is no established maintenance organization and system, which causes both facility deterioration and squandering of the nation's resources. Thus the object of this paper is to examine a maintenance system of established public school facilities and to improve the system which is enable to maximize the efficiency for the existing maintenance organization.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.31A no.6
• /
• pp.177-187
• /
• 1994

In the design of modern computer systems, the speed gap between the CPUs and DRAMs has been a major concern. To relieve this problem at a low cost, several new DRAM architectures have been proposed. This study is aimed at evaluating quantitatively the impact of the new DRAM architectures (synchronous DRAM. dual-RAS synchronous DRAM, and enhanced DRAM) on the memory system performance. We developed a cache and memory simulator and performed various experiments using the traces generated from four benchmark programs. The simulation results show that the new DRAM architectures offer a better performance than a conventional one by 5~30% in a low cost system and their improvement in a high performance system is less than 1%. However, for resonable multiprogramming workoads, additional performance improvement of about 10~28% is expected in a high performance system while 1~3% in a low cost system.

• Phonetics and Speech Sciences
• /
• v.6 no.2
• /
• pp.29-34
• /
• 2014

In the Vector Taylor Series (VTS)-based noisy speech recognition methods, Hidden Markov Models (HMM) are usually trained with clean speech. However, better performance is expected by training the HMM with noisy speech. In a previous study, we could find that Minimum Mean Square Error (MMSE) estimation of the training noisy speech in the log-spectrum domain produce improved recognition results, but since the proposed algorithm was done in the log-spectrum domain, it could not be used for the HMM adaptation. In this paper, we modify the previous algorithm to derive a novel mathematical relation between test and training noisy speech in the cepstrum domain and the mean and covariance of the Multi-condition TRaining (MTR) trained noisy speech HMM are adapted. In the noisy speech recognition experiments on the Aurora 2 database, the proposed method produced 10.6% of relative improvement in Word Error Rates (WERs) over the MTR method while the previous MMSE estimation of the training noisy speech produced 4.3% of relative improvement, which shows the superiority of the proposed method.

• Journal of the Ergonomics Society of Korea
• /
• v.12 no.1
• /
• pp.17-24
• /
• 1993

Today, rapid development and timeliness of introducing a new product be- comes a more influencing factor of determing its competitive power due to a shortened product cycle, while rapid improvement of manufacturing technology makes product design and manufacturing fuse together. This implies that prod- uct usability evaluation and improvement starts right from its design phase, resulting in less development time and cost. To make this possible, proper as- sessment of human reach is one of essential functions for ergonomic product us- ability evaluation, specifically in the platform of computer-aided ergonomic evaluation models or any CAD system with a built-in man model. In this study, an analytic reach prediction algorithm ensuring the posture that human naturally takes, is presented by employing the methods developed for robot kinematics. Among robot kinematic methods for solving the multi-link system, the resolved motion method was found to be effective to solve human reach as a redundant manipulator model. Also, the joint range availability was used as a performance fonction to guarantee human naturalness. The result is expected to be directly applicable to product usability evaluations.

• Quality Improvement in Health Care
• /
• v.18 no.1
• /
• pp.1-14
• /
• 2012

Two years have passed since hospital accreditation was introduced in Korea by the Korean Institute of Healthcare Accreditation (KOIHA), which takes, as its mission, continuously improving healthcare quality and patient safety for the public. KOIHA also has a plan to impose on outcomes in management of patient care. With a view to enhance the practice of accreditation in terms of quality as well as quantity, and to help improve healthcare quality and patient safety in Korea, this paper reviews some issues on healthcare policies which are expected to be adopted in 2013 by the forthcoming government. A few suggestions are added.

• Journal of Korean Society for Quality Management
• /
• v.44 no.1
• /
• pp.17-28
• /
• 2016

Purpose: This paper reviews the papers on quality innovation issues which are published in the Journal of the Korean Society for Quality Management (KSQM) since 1965. The literature review is purposed to survey a variety of quality innovation issues Methods: We divide all of quality innovation issues into 2 categories: quality control circle, quality innovation and improvement Results: Dividing all of papers on quality innovation published in KSQM for 50 years into 2 categories, we provide a chronological roadmap for individual categories, and summarize the contents and contributions of surveyed papers Conclusion: The review paper is expected to provide future direction to improve quality innovation theory and practices in manufacturing and service industries