• 한국항공우주학회지
• /
• 제46권4호
• /
• pp.290-296
• /
• 2018

본 연구에서는 초고속 비행체 고공환경 모사시험 설비의 운용범위를 확인하기 위하여 시험모델의 형상변수에 따라 상온시험 및 수치해석을 수행하였다. 시험 모델의 형상변수로는 폐색율, 각도 및 길이 비를 고려하였다. 폐색율은 경사충격파와 팽창 팬의 영향으로 40% 이상의 영역에서 운용이 제한될 것으로 판단된다. 각도의 변수는 강한 충격파의 영향으로 45도 이하의 크기에서 모델을 선정해야함을 확인하였다. 길이의 변수는 모델직경대비 8배의 길이 변화에도 성능의 차이가 없었다. 최종적으로 원뿔형 시험 모델의 형상 변수에 따른 성능 데이터베이스를 확보하였으며, 준 자유흐름식 고공환경 모사설비의 운용 가능한 범위를 확인할 수 있었다.

• 한국터널지하공간학회 논문집
• /
• 제20권1호
• /
• pp.39-53
• /
• 2018

일반적으로 터널 내 총환기저항계수는 입출구 손실계수, 벽면마찰계수 그리고 급격한 확대나 축소단면 등에 의해 발생하는 부차적 손실계수의 총합으로 구성된다. 개통 전 터널의 경우는 가동 중인 환기팬을 중단하게 되면, 터널 내 풍속은 총환기저항력에 의해 감소하는 현상이 나타난다. 즉, 속도감쇄법은 개통 전 터널에서 비교적 안정적이면서도 손쉽게 터널 내 벽면마찰계수를 추정하는 방법이다. 그러나 기존의 선행연구에서 환기팬의 가동을 중단 후 수렴되는 풍속이 음수일 경우는 속도감쇄법에 따른 벽면마찰계수의 추정이 곤란한 특성이 있다. 반면 교통환기력이 작용하는 공용 중인 터널에서는 좀더 복잡한 과정을 거치지만, 합리적인 벽면마찰계수를 추정할 수 있다. 본 연구에서는 교통환기력의 측정변수를 최소화할 수 있는 방법을 제안하였고, 공용 중 터널에 적용할 수 있는 방법을 고찰하였다. 또한 환기팬 정지 후 터널 내 풍속이 감소하는 동안에 외부 자연풍의 급격한 변화가 발생하여도 교통환기력이 일정할 경우에 대하여, 교통환기력의 증분을 계산할 수 있는 방법과 터널 내 벽면마찰계수를 추정할 수 있도록 동적 시뮬레이션이 가능한 프로그램 로직을 개발하였다.

• 대한기계학회논문집
• /
• 제9권2호
• /
• pp.158-173
• /
• 1985

본 연구에서는 상호작용상류의 난류경계층에 분출을 가해서 경계층을 불안정 화시키고 이 불안정화된 난류경계층과 사각입사충격파와의 상호작용을 실험적으로 연 구하였다. Squire-Smith와는 다른 실험모형의 새로운 형태를 제시하였고 상호작용영 역에서 경계층의 압력분포 및 속도분포를 측정해서 충격파반사의 형태를 밝혔다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.159-159
• /
• 2011

Among the semiconductor ternary compounds in the I-III-$VI_2$ series, $CulnS_2$ ($CulnSe_2$) are one of the promising materials for photovoltaic applications because of the suitability of their electrical and optical properties. The $CuInS_2$ thin film is one of I-III-$VI_2$ type semiconductors, which crystallizes in the chalcopyrite structure. Its direct band gap of 1.5 eV, high absorption coefficient and environmental viewpoint that $CuInS_2$ does not contain any toxic constituents make it suitable for terrestrial photovoltaic applications. A variety of techniques have been applied to deposit $CuInS_2$ thin films, such as single/double source evaporation, coevaporation, rf sputtering, chemical vapor deposition and chemical spray pyrolysis. This is the first report that $CuInS_2$ thin films have been prepared by Aerosol Jet Deposition (AJD) technique which is a novel and attractive method because thin films with high deposition rate can be grown at very low cost. In this study, $CuInS_2$ thin films have been prepared by Aerosol Jet Deposition (AJD) method which employs a nozzle expansion. The mixed fluid is expanded through the nozzle into the chamber evacuated in a lower pressure to deposit $CuInS_2$ films on Mo coated glass substrate. In this AJD system, the characteristics of $CuInS_2$ films are dependent on various deposition parameters, such as compositional ratio of precursor solution, flow rate of carrier gas, stagnation pressure, substrate temperature, nozzle shape, nozzle size and chamber pressure, etc. In this report, $CuInS_2$ thin films are deposited using the deposition parameters such as the compositional ratio of the precursor solution and the substrate temperature. The deposited $CuInS_2$ thin films will be analyzed in terms of deposition rate, crystal structure, and optical properties.

• 대한구순구개열학회지
• /
• 제15권2호
• /
• pp.69-82
• /
• 2012

Our Team Approach consists of following five stages; (1) Peri-natal care until lip repair After ultrasound diagnosis, some obstetricians recommend the mother with CL/P fetus to undergo prenatal counseling in our CLP clinic. On the day the CL/P baby was born, our oral surgeon, nurse, and pedodontist visit the maternity clinic, and take counseling and take impression for a feeding plate. The cheiloplasty is performed in three months old. (2) From lip repair to palatal repair At one year of age, Otorhinolaryngologist checks middle-ear disease. Palatoplasty is carried out at 1.5 - 2 years old. (3) In deciduous and early mixed dentitions Speech is the most important issue in social life for the CL/P subjects, therefore the training of velopharyngeal function is essential. Orthodontist monitors dentofacial development from 5 years of age. In the case of severe maxillary under-growth or severe collapse, maxillary protractor or lateral expansion is indicative, respectively. In early mixed dentition, upper central incisor on the cleft area erupts with some torsion, and then the traumatic occlusion with tooth torsion must be corrected. (4) In mixed dentition Right before the eruption of upper canines, secondary bone grafting is performed. One year prior to the operation, maxillary fan-type expansion is carried out to correct the collapse of maxillary segments. Following the surgical operation, the erupted canine will be moved into the transplanted bone to avoid alveolar resorption. (5) In permanent dentition Final tooth alignment is carried out after eruption of second molars. Some cases may require orthognathic surgery after physical maturation. Prosthetic oral rehabilitation including the dental-implant is carried out after age eighteen.

• Structural Engineering and Mechanics
• /
• 제54권1호
• /
• pp.87-103
• /
• 2015

This paper focuses on an analytical research on the critical buckling load of cylindrical shells with stepwise variable wall thickness under axial compression. An arctan function is established to describe the thickness variation along the axial direction of this kind of cylindrical shells accurately. By using the methods of separation of variables, small parameter perturbation and Fourier series expansion, analytical formulas of the critical buckling load of cylindrical shells with arbitrary axisymmetric thickness variation under axial compression are derived. The analysis is based on the thin shell theory. Analytic results show that the critical buckling load of the uniform shell with constant thickness obtained from this paper is identical with the classical solution. Two important cases of thickness variation pattern are also investigated with these analytical formulas and the results coincide well with those obtained from other authors. The cylindrical shells with stepwise variable wall thickness, which are widely used in actual engineering, are studied by this method and the analytical formulas of critical buckling load under axial compression are obtained. Furthermore, an example is presented to illustrate the effects of each strake's length and thickness on the critical buckling load.

• Advances in aircraft and spacecraft science
• /
• 제4권4호
• /
• pp.487-501
• /
• 2017

The main purpose of the paper is to analyze effect of geometrical parameters of the reentry capsules such as radius of the spherical cap, shoulder radius, back shell inclination angle and overall length on the flow field characteristics. The numerical simulation with viscous flow past ARD (Atmospheric Reentry Demonstrator), Soyuz (Russian) and OREX (Orbital Reentry EXperimental) reentry capsules for freestream Mach numbers range of 2.0-5.0 is carried out by solving time-dependent, axisymmetric, compressible laminar Navier-Stokes equations. These reentry capsules appear as bell, head light and saucer in shape. The flow field features around the reentry capsules such as bow shock wave, sonic line, expansion fan and recirculating flow region are well captured by the present numerical simulations. A low pressure is observed immediately downstream of the base region of the capsule which can be attributed to fill-up in the growing space between the shock wave and the reentry module. The back shell angle and the radius of the shoulder over the capsule are having a significant effect on the wall pressure distribution. The effects of geometrical parameters of the reentry capsules will useful input for the calculation of ballistic coefficient of the reentry module.

• Structural Engineering and Mechanics
• /
• 제70권5호
• /
• pp.525-534
• /
• 2019

An analytical research on buckling of simply supported thin plate with variable thickness under bi-axial compression is presented in this paper. Combining the perturbation technique, Fourier series expansion and Galerkin methods, the linear governing differential equation of the plate with arbitrary thickness variation under bi-axial compression is solved and the analytical expression of the critical buckling load is obtained. Based on that, numerical analysis is carried out for the plates with different thickness variation forms and aspect ratios under different bi-axial compressions. Four different thickness variation forms including linear, parabolic, stepped and trigonometric have been considered in this paper. The calculated critical buckling loads and buckling modes are presented and compared with the published results in the tables and figures. It shows that the analytical expressions derived by the theoretical method in this paper can be effectively used for buckling analysis of simply supported thin plates with arbitrary thickness variation, especially for the stepped thickness that used in engineering widely.

• Nuclear Engineering and Technology
• /
• 제54권4호
• /
• pp.1374-1381
• /
• 2022

Under the influence of nuclear radiation, the reliability of steam generators (SGs) is an important factor in the efficiency and safety of nuclear power plant (NPP) reactors. Motion planning that remotely manipulates an SG mobile tube-inspection robot to inspect SG heat transfer tubes is the mainstream trend of NPP robot development. To achieve motion planning, conditional traversal is usually used for base position optimization, and then the A^* algorithm is used for path planning. However, the proposed approach requires considerable processing time and has a single expansion during path planning and plan paths with many turns, which decreases the working speed of the robot. Therefore, to reduce the calculation time and improve the efficiency of motion planning, modifications such as the matrix method, improved parent node, turning cost, and improved expanded node were proposed in this study. We also present a comprehensive evaluation index to evaluate the performance of the improved algorithm. We validated the efficiency of the proposed method by planning on a tube sheet with square-type tube arrays and experimenting with Model SG.

• 한국콘텐츠학회논문지
• /
• 제15권6호
• /
• pp.24-32
• /
• 2015

본 논문은 한류의 전세계적 확산이 유튜브라는 새로운 SNS 서비스의 등장으로 확산방식이 달라진 것에 주목한다. 싸이의 '강남스타일'은 유튜브와 SNS의 매개를 통해 전세계적으로 성공했고 이로 인해 미디어 학자들은 한국 대중문화의 전세계적 확산과 유통의 새로운 양식에 대해 주목하게 되었다. 따라서 음악의 직접적인 전파뿐만 아니라 유튜브 사용자들의 K-pop의 전유양식에 대한 검토도 역시 필요하다. 즉, 단순히 대중문화 수용자들이 문화적 텍스트를 보거나 듣는 것을 넘어 어떻게 이러한 전유양식이 대중문화의 국제적 확장과 증폭에 기여하는 지를 검토할 필요가 있다. 이전에는 CD나 DVD와 같은 유형의 재화의 유통을 통해 대중문화의 유통이 매개되었으나 유튜브의 등장으로 유형의 재화 없이도 문화 교류가 이루어지는 새로운 현상이 발생한다. 이 연구는 어떻게 이런 유튜브 사용자들의 전유양식, 특히 K-pop 팬들이 만든 동영상이 K-pop의 전세계적 확산에 어떻게 간접적으로 기여하는 지를 살펴 본다. 이론적 측면에는 팬덤 연구 등을 검토한다. 연구방법으로는 온라인 공동체에 대한 민속지학적 연구방법인 넷노그래피를 사용한다.