• The KIPS Transactions:PartA
• /
• v.13A no.5 s.102
• /
• pp.429-434
• /
• 2006

A CCTV system reduces some number of cameras if we use convex-mirror. In this case, convex-mirror Image distorted, we need transformation to flat images. In the center of mirror images, a transformed image has no distortion, but at near boundary image has plentiful distortion. This distortion is caused by occlusion of angled ray and diffraction. We know that the linear filtering approach cannot separate noise from signal where their Fourier spectra overlap. But using a non-linear discretization method, we shall reduce blurred noise. In this paper, we introduce the backward solution of nonlinear wave equation for reducing blurred noise and biased expansion of equilibrium contour. We propose, after applying the introduced method, and calculate with discretization method. To analysis the experimental result, we investigate to PSNR and get about 4dB better than current method.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.22 no.4
• /
• pp.121-130
• /
• 2014

This paper is the second investigation on the effects of intake flow control methods on the part load performance in a spark ignition engine. In the previous work, two control methods, port throttling and masking, were compared with respect to lean misfire limit, fuel consumption and emissions. In this work, the effects of these two methods on EGR characteristics were studied and simultaneously the differences between EGR and lean combustion as a dilution method were investigated. The results show that EGR limit is expanded up to 23% and 3 ~ 5% improvement in the fuel consumption are achieved around 8 ~ 13% rates by the flow controls comparing with 10% limit and 1.5% reduction around 3% rate of non-control case. The masking method is more effective on the limit expansion than throttling as like as lean misfire limit; however there is no substantial difference in fuel consumptions improvement regardless the control methods except high load condition. Also it is observed that there exist critical EGR rates around which the combustion performance and NOx formation change remarkably and these rates generally coincide with optimum rates for the fuel consumption. In addition, dilution with fresh air is much more advantageous than that of the exhaust gas from the view point of dilution limit and fuel consumption, while utilization of the exhaust gas is more effective on NOx reduction in spite of considerably small dilution compared with the use of fresh air. Finally, the improvement of fuel consumption by massive EGR is highly dependent on the EGR limit at which the engine runs stably, therefore the stratified combustion technique might be a best solution for this purpose.

• Korean Journal of Remote Sensing
• /
• v.32 no.6
• /
• pp.647-656
• /
• 2016

Growth of UAV technology leads to expansion of UAV image applications. Many UAV image-based applications use a method called incremental bundle adjustment. However, incremental bundle adjustment produces large computation overhead because it attempts feature matching from all image pairs. For efficient feature matching process we have to confine matching only for overlapping pairs using exterior orientation parameters. When exterior orientation parameters are not available, we cannot determine overlapping pairs. We need another methods for feature matching candidate constitution. In this paper we compare matching candidate constitution methods without exterior orientation parameters, including partial feature matching, Bag-of-keypoints, image intensity method. We use the overlapping pair determination method based on exterior orientation parameter as reference. Experiment results showed the partial feature matching method in the one with best efficiency.

• The Research Journal of the Costume Culture
• /
• v.18 no.5
• /
• pp.1003-1016
• /
• 2010

The purpose of this study is to reorganize any rusty image including natural modeling characteristic presented from the natural phenomenon to certain patterns in order to create the fashion design that are valued in the expansion of independently expressional area and modeling art. As a method for research, the author analyzed the concept and characteristic for rust with a base of theoretical background by the documental research and realistic consideration, analyzed its modeling characteristic through domestic and overseas pictures, and e-documents as data, inspected the modeling activities of various categories that various images were adapted related to rust, looked into the concept of Digital Textile Printing and its producing procedure as an expressional method, and analyzed the examples of modern dress and its ornament making use of Digital Textile Printing. The conclusions of this study are as below. First, the rust occurred due to the natural phenomenon is the bond with different material like metal, each unique modeling characteristic occurs and harmony of various patterns has abundant aesthetic value. Second, the author could endowed sensible characteristic and speciality with works and could produce creative fashion design that painting, abstractive pattern and harmony of unique sense of colors are significant by using the image of rust, Third, to emphasize natural feeling of rust, the author could develop creative design that simple silhouette and impressive pattern look significant by reorganizing and applying rust according to repetition, increment, rhythm, contract, emphasis and harmony. Fourth, Digital Textile Printing method is used to induce visual effect by the expression of feels of rust, and the author could express the natural patterns, delicate expression for the feels of a material and unique design of emotion.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.13 no.1
• /
• pp.51-61
• /
• 2000

This paper discusses the homogenization method to determine effective average elastic constants of a linear structure by considering its microstructure. A detailed description on the homogenization method is given for the linear elastic material and then the finite element approximation is performed for an investigation of elastic properties. An asymptotic expansion is carried out in the cross-section area, or in the unit cell. Two and three lay-up structures made up of individual isotropic constituents are chosen for numerical examples to check discrepancies between results generated by this theoretical development and the conventional approach. Asymptotic characteristics of the process in extracting the stiffness of structure locally formed by spatial repetitions yield underestimated values of stiffness. These discrepancies are detected by the asymptotic corrective term which is ascribed to considerations of microscopic perturbations and proved in the finite element formulation. The asymptotic analysis is the more reasonable in analysing the composite material, rather than the conventional approach to calculate the macroscopic average for elastic properties.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.33 no.5
• /
• pp.279-286
• /
• 2020

In this study, we investigate the accuracy of higher order derivatives in the moving least square (MLS) difference method. An interpolation function is constructed by employing a Taylor series expansion via MLS approximation. The function is then applied to the mixed variational theorem in which the displacement and stress resultants are treated as independent variables. The higher order derivatives are evaluated by solving simply supported beams and cantilevers. The results are compared with the analytical solutions in terms of the order of polynomials, support size of the weighting function, and number of nodes. The accuracy of the higher order derivatives improves with the employment of the mean value theorem, especially for very high-order derivatives (e.g., above fourth-order derivatives), which are important in a classical asymptotic analysis.

• Journal of Korean Society on Water Environment
• /
• v.30 no.2
• /
• pp.226-241
• /
• 2014

This study proposes schemes of GIS-based system development for integrated information management in water environment linked with Korean Reach File (KRF). For this purpose, precedent studies and systems of the U.S. were investigated and analyzed to induce optimal methodology for Korean circumstances. Thereafter, data linkage methods of KRF and Water Environment Information System (WEIS), system configuration plans, application development plans, and KRF improvement and maintenance plans were considered. For data linkage and system configuration, three methods were suggested: an overlay operation-based data linkage method, entering spatial addresses into the existing DB, and creating link information between KRF and the existing DB. The first method was predicted to be the most effective for system implementation, the second method is advantageous for search tasks, and the third method is advantageous for system security and maintenance. Various types of applications should be developed in the consideration of the types of the users and their usages. Moreover, there is a need for further research on regular renewal of KRF, standard development, expansion of construction areas, etc. Based on the present results, research on actual system design and development also should be conducted for supporting Total Maximum Daily Loads (TMDLs).

• Journal of Arbitration Studies
• /
• v.12 no.2
• /
• pp.373-418
• /
• 2003

This is to study intellectual property(IP) protection of contents which is related with transactions upon internet network. Issues of electronic transaction and infringement cases were studied and analyzed for intellectual property protection. Upon those study, utilization and activation of contents, dispute settlement and method of IP protection were suggested. To achieve this study purpose, it consists of 5 chapters. In chapter 1 introduction, it's mentioned purpose, scope, and method of this study. In chapter 2, outline of contents and e-Commerce, and subject of IP protection upon internet were studied. In chapter 3, issues and dispute factors of IP were discussed and infringement cases were analyzed. It found out that infringements would be variety and complex due to technology rapidly changes. In chapter 4, IP protection plan and responsibility of webmaster were studied and emphasized to protect IP upon Internet. Also, protection against infringement and method of dispute resolution were studied and suggested the method. In this study, the protection plan was suggested because IP protection of contents in internet would be many cases upon internet technology. It found out that technology was important for business expansion of contents, e-Commerce and IP protection, and to enact a law related with IP. In chapter 5 conclusion, this study was summarized and further research was suggested. This study results are 1. IP related laws had better enact or revise to meet internet technology changes for IP protection timely, 2. local laws are to change and develop to harmony with international norm and trends, 3. consolidation of IP related laws for unification of IP statement should be incurred to avoid unnecessary energy of legislation and not to create dispute matters. That's also for customer satisfaction. In conclusion, not to incur ADR and for IP protection of contents, IP related laws would be promptly made or revised, according to technology change trends and for international harmony, That's for internet related industry development and customer satisfaction.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.47 no.4
• /
• pp.15-20
• /
• 2010

The three dimensional information is extracted and visualized using by stereo images of the object and the method for a 3D stereoscopic image is presented by the vergence control algorithm. The matching, which is applied a undistortion of lens and the energy function, is executed for the efficient extraction three dimensional information. Especially, applying the optimized method of matched line to the multi direction of the disparity imges. The disadvantages of multi directional method and reliability expansion method is collected. The matched interesting range of the three dimensional information is visualized using by VRML and more 3D stereoscopic image is visualized through the vergence control according to distance of the object. more improved three dimensional information is provided to observer by visualizing both of them at the same time.

• Journal of the Microelectronics and Packaging Society
• /
• v.26 no.4
• /
• pp.141-148
• /
• 2019

Electronic substrates used in a mobile device is composed of various materials, and when the temperature is changed during manufacturing or operating, thermal deformation and stress concentration occur due to the difference in thermal expansion coefficient of each material. The shadow moiré technique is a non-contact optical method that measures shape or out-of-plane displacement over the entire area, but it is necessary to overcome the Talbot effect for high sensitivity applications. In this paper, LED light sources of various wavelengths was used to overcome the Talbot effect caused in the shadow moiré technique. By using the phase shift method, an experimental method to retain the measurement sensitivity within 10 ㎛/fringe was proposed and evaluated, and this method is applied to the thermal deformation measurement of the mobile electronic substrate. In the case of using white light, there were several areas that could not be measured due to the Talbot effect, but in the case of using blue LED light, it was shown that a precise moiré pattern with a sensitivity of 6.25 ㎛/fringe could be obtained in most areas.