• 한국정밀공학회지
• /
• 제23권9호
• /
• pp.127-133
• /
• 2006

Cold expansion method is used to protect a fatigue fracture from fastener hole in the structure and aerospace industry. Cold expansion is that an oversized tapered mandrel goes through the hole and produces a compressive residual stress as well as plastic deformation around the hole. Here, mandrel shapes are one of the factors which are influenced on the residual stress distribution by cold expansion method. This paper, according to mandrel shapes (diameter of mandrel, length of mandrel and length of taper), we are performed a finite element analysis of residual stress distribution by cold expansion method. From this study, it has been found that diameter of mandrel and length of taper are an important factor which was generated a low compressive residual stress surround of fastener hole by cold expansion method.

• International Journal of Control, Automation, and Systems
• /
• 제6권5호
• /
• pp.627-638
• /
• 2008

With the shift of the electric power industry from a regulated monopoly structure to a competitive market environment, the focus of the transmission expansion planning has been moving from reliability-driven transmission expansion to market-based transmission expansion. In market-based transmission expansion, however, a growing demand for electricity, an increasing number of transmission bottlenecks, and the falling levels of transmission investment have created the need for an incentive to motivate investors. The expectation of profit serves as a motivational factor for market participants to invest in transmission expansion in a competitive market. To promote investment in transmission expansion, there is an increasing need for a systematic method to examine transmission expansion for investment incentives from multiple perspectives. In this paper, the transmission expansion problem in a competitive market environment is formulated from ISO and investors' perspectives. The proposed method uses parametric analysis to analyze benefits for investors to identify the most profitable location and amount for transmission addition. Numerical results are presented to demonstrate the effectiveness of the proposed method.

• 대한기계학회논문집A
• /
• 제26권8호
• /
• pp.1615-1622
• /
• 2002

The purpose of this study is comparing cold expansion method with interference fit. Cold expansion method and interference fit of fastener hole is using in the aerospace industry. These treatment lead to an improvement of fatigue life to the compressive residual stresses developed on the hole surface. But Research is nothing to about difference effect of between cold expansion method and interference fit. So, this paper, it is shown that Comparing cold expansion method with interference fit using the finite element method. It is further shown that residual stress distribution according to plate thickness and clamping force.

• 한국멀티미디어학회논문지
• /
• 제7권12호
• /
• pp.1680-1691
• /
• 2004

One of the representative methods of optical flow is a gradient method which estimates the movement of an object based on the differential of image brightness. However, the method is ineffective for large displacement of the object and many improved methods have been proposed to copy with such limitations. One of these improved techniques is the multigrid processing, which is used in many optical flow algorithms. As an alternative novel technique we have been proposing an orthogonal functional expansion method, where whole displacements are expanded from low frequency terms. This method is expected to be applicable to flow estimation with large displacement and deformation including expansion and contraction, which are difficult to cope with by conventional optical flow methods. In the orthogonal functional expansion method, the apparent displacement field is calculated iteratively by a projection method which utilizes derivatives of the invariant constraint equations of brightness constancy. One feature of this method is that differentiation of the input image is not necessary, thereby reducing sensitivity to noise. In this paper, we apply our method to several real images in which the objects undergo large displacement and/or deformation including expansion. We demonstrate the effectiveness of the orthogonal functional expansion method by comparing with conventional methods including our optimally scaled multigrid optical flow algorithm.

• Smart Structures and Systems
• /
• 제18권4호
• /
• pp.819-837
• /
• 2016

The quality of vibration pattern reproduction of elastic structures by the modal expansion method is influenced by the modal expansion method and the sensor placement as well as the accuracy of measured natural modes and the total number of vibration sensors. In this context, this paper presents an improved numerical method for reproducing the vibration patterns by introducing a block-wise modal expansion method (BMEM), together with the genetic algorithm (GA). For a given number of vibration sensors, the sensor positions are determined by an evolutionary optimization using GA and the modal assurance criterion (MAC). Meanwhile, for the proposed block-wise modal expansion, a whole frequency range of interest is divided into several overlapped frequency blocks and the vibration field reproduction is made block by block with different natural modes and different modal participation factors. A hollow cylindrical tank is taken to illustrate the proposed improved modal expansion method. Through the numerical experiments, the proposed method is compared with several conventional methods to justify that the proposed method provides the improved results.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집A
• /
• pp.419-424
• /
• 2001

The purpose of this study is comparing cold expansion method with interference fit. Cold expansion method and interference fit of fastener hole is using in the aerospace industry. These treatment lead to an improvement of fatigue life to the compressive residual stresses developed on the hole surface. But Research is nothing to about difference effect of between cold expansion method and interference fit. So In this paper, It is shown that Comparing cold expansion method with interference fit. and It is further shown that residual stress distribution according to plate thickness.

• Journal of Information Processing Systems
• /
• 제13권4호
• /
• pp.805-817
• /
• 2017

Cross-lingual query expansion is usually based on the relationship among monolingual words. Bilingual comparable corpus contains relationships among bilingual words. Therefore, this paper proposes a method based on these relationships to conduct query expansion. First, the word vectors which characterize the bilingual words are trained using Chinese and Thai bilingual comparable corpus. Then, the correlation between Chinese query words and Thai words are computed based on these word vectors, followed with selecting the Thai candidate expansion terms via the correlative value. Then, multi-group Thai query expansion sentences are built by the Thai candidate expansion words based on Chinese query sentence. Finally, we can get the optimal sentence using the Chinese and Thai query expansion method, and perform the Thai query expansion. Experiment results show that the cross-lingual query expansion method we proposed can effectively improve the accuracy of Chinese and Thai cross-language information retrieval.

• 한국해양공학회지
• /
• 제24권5호
• /
• pp.1-7
• /
• 2010

Offshore, sub-sea pipelines that transport oil and gas experience thermal expansion induced by the temperature of the transported medium during operation. The expansion of the pipeline can induce overload and cause damage to offshore platforms or sub-sea structures that are connected to the pipelines. To mitigate and prevent these incidents, expansion spools are installed between offshore, sub-sea pipelines and risers on the platform. This paper presents the results of the study and development of a simplified design method for expansion spools, using the slope deflection method for the purpose of preliminary design or front-end engineering and design (FEED).

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 춘계학술대회 논문집
• /
• pp.1239-1243
• /
• 2007

Autonomous Station Control System is automatic route control system of large-scale station. The system has flexibility of system step-by-step construction and expandability. A method of step-by-step construction for Autonomous Station Control System has system expansion and subsystem software expansion. The system has autonomous controllability and autonomous coordinability for system step by step construction. With property for a basis, each of subsystem communicates data field. Also, Each subsystem has its own management system, Autonomous Data Manager to manage itself and coordinate with the others. This paper make clear test method for Autonomous Station Control System expansion and software expansion. The first test method of system increasing construction is single station construction test. The second of method is connecting test the neighbor's Autonomous Station Control System. The third of method is connecting test the Autonomous Line Management System. Also, the test method of software expansion take the case of route control subsystem.

• 한국산업융합학회 논문집
• /
• 제14권2호
• /
• pp.79-85
• /
• 2011

This study has been experimented about refrigeration capacity difference. It has been used 3 method, Manual expansion valve, thermostatic expansion valve and capillary expansion valve, and tested under the same condition by using the performance testing of parallel expansion. In temperature change of the temperature room, thermostatic expansion valve method displayed the most lower temperature, $-18^{\circ}C$. In addition, the temperature, just before the expansion, also displayed the best result which was $4^{\circ}C$ lower than other expansion valve. In these results, it can be used for performance testing of parallel expansion refrigeration system.