• IEMEK Journal of Embedded Systems and Applications
• /
• v.17 no.3
• /
• pp.167-175
• /
• 2022

With the recent expansion of electric kickboards and bicycle sharing services, more and more people use them. In addition, the rapid growth of the delivery business due to the COVID-19 has significantly increased the use of two-wheeled vehicles and personal mobility. As the accident rate increases, the rule related to the two-wheeled vehicles is changed to 'mandatory helmets for kickboards and single-person transportation' and was revised to prevent boarding itself without driver's license. In this paper, we propose a wearable smart safety equipment, called SafetyHelmet, that can keep helmet-wearing duty and lower the accident rate with the communication between helmets and mobile devices. To make this function available, we propose a safe driving assistance function by notifying the driver when an object that interferes with driving such as persons or other vehicles are detected by applying the YOLO v5 object detection algorithm. Therefore it is intended to provide a safer driving assistance by reducing the failure rate to identify dangers while driving single-person transportation.

• Journal of the Korean Society of Industry Convergence
• /
• v.25 no.6_2
• /
• pp.1029-1036
• /
• 2022

The traditional outdoor advertising market has been stagnant recently, but the digital advertising market has been steadily increasing, and the digital signage market has been expanding despite the recent corona pandemic. However, in terms of hardware, new displays are required due to excessive power consumption, lack of visibility in sunlight, and continuous operating expenses. Since the e-paper display does not require a light emitting device therein, it is advantageous to solve above problems. In addition, it has the advantage of consuming power only when converting an image due to bistability, so it is suitable as hardware that implements images rather than moving pictures. Currently, one of the most successful examples of commercializing e-paper displays is ESL devices. According to a recent market study, the market for large-sized panels larger than 10 inches has grown at an annual rate of 21.6%, and the market is expected to exceed 30% by 2026. It is judged that it will be relatively easy to apply the roll-to-roll technology, which is currently developing the technology applied to OLED, to the e-paper display. Therefore, mass production technology and market expansion for ESL panel enlargement are expected, and a new market is also expected to be formed at the same time. New markets will be traffic signs, public displays, billboards, façades, kiosks, digital signage, and so on.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2021.05a
• /
• pp.321-322
• /
• 2021

This study is to develop a non-contact construction project management solution that can reduce cost and construction period through on-site information sharing, minimizing contact with others by COVID19, and improving the productivity of the construction industry. Decisions, checklists, and execution rates of construction costs can be checked with smart devices through sharing on-site photos and videos, exchanging opinions. Details and checklist data stored on cloud servers of sites that apply non-face-to-face construction project management solutions will be used as data for analyzing amounts and construction periods depending on the size of the construction. Real-time field information sharing will reduce expected problems and waste factors, expand communication channels with users to prevent or minimize construction disputes and claims, and contribute to the expansion and growth of new research industry markets in construction technology.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2021.05a
• /
• pp.323-324
• /
• 2021

This study is to develop a non-contact construction project management solution that can reduce cost and construction period through on-site information sharing, minimizing contact with others by COVID19, and improving the productivity of the construction industry. Decisions, checklists, and execution rates of construction costs can be checked with smart devices through sharing on-site photos and videos, exchanging opinions. Details and checklist data stored on cloud servers of sites that apply non-face-to-face construction project management solutions will be used as data for analyzing amounts and construction periods depending on the size of the construction. Real-time field information sharing will reduce expected problems and waste factors, expand communication channels with users to prevent or minimize construction disputes and claims, and contribute to the expansion and growth of new research industry markets in construction technology.

• Advances in nano research
• /
• v.14 no.6
• /
• pp.575-590
• /
• 2023

Many of small-scale devices should be designed to tolerate high temperature changes. In the present study, the states of buckling and stability of nano-scale cylindrical shell structure integrated with piezoelectric layer under various thermal and electrical external loadings are scrutinized. In this regard, a multi-layer composite shell reinforced with graphene nano-platelets (GNP) having different patterns of layer configurations is modeled. An outer layer of piezoelectric material receiving external voltage is also attached to the cylindrical shell for the aim of observing the effects of voltage on the thermal buckling condition. The cylindrical shell is mathematically modeled with first-order shear deformation theory (FSDT). Linear elasticity relationship with constant thermal expansion coefficient is used to extract the relationship between stress and strain components. Moreover, minimum virtual work, including the work of the piezoelectric layer, is engaged to derive equations of motion. The derived equations are solved using numerical method to find out the effects of temperature and external voltage on the buckling stability of the shell structure. It is revealed that the boundary condition, external voltage and geometrical parameter of the shell structure have notable effects on the temperature rise required for initiating instability in the cylindrical shell structure.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.32 no.5
• /
• pp.447-453
• /
• 2010

The hemifacial microsomia is characterized by variable underdevelopment of the craniofacial skeleton, external ear, and facial soft tissues. So, patients with hemifacial microsomia have an occlusal plane canting and malocclusion with facial asymmetry. Distraction osteogenesis (DO) with an intraoral or extraoral device is a technique using tension to generate new bone with gradual bone movement and remodeling. DO has especially been used to correct craniofacial deformities such as a hemifacial microsomia, facial asymmetry, and mandible defect that could not adequately be treated by conventional reconstruction with osteotomies. It has a significant advantage to lengthen soft and hard tissue of underdeveloped site without bone graft and a few complication such as nerve injury or muscle contracture. A 13-years old girl visited our clinic for the chief complaint of facial asymmetry. She had a left hypoplastic maxilla and mandible, occlusal plane canting and malocclusion. We diagnosed hemifacial microsomia and lanned DO to lengthen the affected side. Le Fort I osteotomy, left mandibular ramus and symphysis osteotomy were performed. The internal distraction devices fixed with screw on maxillary and mandibular ramus osteotomy sites. External devices were adapted to lower jaw for DO on symphysis osteotomy site and to upper jaw for rapid maxillary expansion (RME). At 7days after surgery, distraction was started at the rate of 1mm per day for 13days, and after 4months consolidation periods, distraction devices were removed. Simultaneous multiple maxillo-mandibular distraction osteogenesis with RME resulted in a satisfactory success in correcting facial asymmetry as well as occlusal plane canting for our hemifacial microsomia.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2006.05a
• /
• pp.417-420
• /
• 2006

UPnP presents home network middleware for local home electrical appliances basedon internet protocols that is available access and control electrical appliances just in local home network. Itis designed to bring easy-to-use, flexible, standards-based connectivity to ad-hoc or unmanaged networks in the home, a small business, public spaces, or attached to the Internet. In this paper, Internet Gateway expands UPnP IGD(Internet Gateway Device) DCP(Device Control protocol) and UPnP IGP Bridge for Internet Home Network Electrical Appliance Control. UPnP IGD DCP is configurable initiation and sharing of internet connections, advanced connection-management features, management of host configuration service, and supports transparent Internet access by non-UPnP-certified devices. UPnP Bridge search for local home network devices by sending control messages. Control Point of UPnP Bridge search for devices of interest on the network and can control or be controlled all of functions by IGD DCP with control commands. Outside client, approach to UPnP IGD DCP, send control messages UPnP Bridge, and invoke each UPnP device. As a result, Electrical Appliance of Home Network base on UPnP, can control and be controlled via the Internet like ones in the one Home Network without modification of existing UPnP.

• The Journal of Bigdata
• /
• v.6 no.2
• /
• pp.17-28
• /
• 2021

Current development of technologies related to 4^th industrial revolution and the pandemic of COVID-19 lead the rapid expansion of e-marketplace. The level of competition among several companies gets increased by introducing different strategies. To cope with the current change in the market and satisfy the customers who request the better delivery service, the new concept, fulfillment, has been introduced. It makes the leadtime of process from order picking to delivery reduced and the efficiency improved. Still, the efficiency of operation in fulfillment centers constrains the service level of the entire delivery process. In order to solve this problem, several different approaches for demand forecasting and coordinating supplies using Bigdata, IoT and AI, which there exists the trivial limitations. Because it requires the most lead time for operation and leads the inefficiency the process from picking to packing the ordered items, the logistics service providers should try to automate this procedure. In this research, it has been proposed to develop the efficient plans to automate the process to move the ordered items from the location where it stores to stage for packing using AGV and AMR. The efficiency of automated devices depends on the number of items and total number of devices based on the demand. Therefore, the result of simulation based on several different scenarios has been analyzed. From the result of simulation, it is possible to identify the several factors which should be concerned for introducing the automated devices in the fulfillment centers. Also, it can be referred to make the optimal decisions based on the efficiency metrics.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.29 no.2
• /
• pp.169-177
• /
• 2016

Sliding slab track system, which consists of low friction sliding layer between track slab and bridge deck, is recently devised to reduce track-bridge interaction effect of continuously welded rail(CWR) without applying special devices such as rail expansion joint(REJ). In this study, a series of track-bridge interaction analyses of a long-span bridge with sliding slab track and REJ are performed respectively and the results are compared. The bridge model includes PSC box girder bridge with 9 continuous spans, and steel-concrete composite girder bridge with 2 continuous spans. The total length of the bridge model is 1,205m, and the maximum spacing between the two fixed supports is 825m. Analyses results showed that the sliding slab track system is highly effective on interaction reduction since lower rail additional axial stress is resulted than REJ application. Additionally, horizontal reaction forces in fixed supports were also reduced compared to the results of REJ application. However, higher slab axial forces were developed in the sliding slab track due to the temperature load. Therefore, track slab section of the sliding slab track system should be carefully designed against slab axial forces.

• Korean Journal of Social Welfare
• /
• v.55
• /
• pp.205-230
• /
• 2003

This article examines the continuity and change of Korean welfare regime during 1990s. Democracy, globalization and the financial crisis changed the landscape of Korean society as a whole and provided a catalyst for the change of the Korean welfare regime. In order to show how and what changed in Korean welfare regime, this study concentrates on the transformations of income maintenance programmes and social welfare services. The changed aspects are as follow: (1) The ratio of social expenditure to GDP has increased during 1990s and now stood at ten percent level. (2)Rather than backing up the company welfare, government strove to build and expand income maintenance devices for all citizens. (3) The poverty and inequality reduction effects of income maintenance programs are very weak in early 1990s, but they are gradually getting stronger impact on poverty and inequality. But, there are also continuance. (1) In spite of the relative development of income maintenance programs, social welfare services are still poorly designed as before. (2) The expenditure level of social welfare services shows sharp contrast to income maintenance programs and lagged behind the other OECD countries. (3) The expansion of social service sector employment are also not so salient. In 2002, social service employment is only at close to 2.5 per cent of the total employment. Accordingly, korean welfare regime is now characterized by a model which is to curb poverty and inequality by engaging in direct government provision of income maintenance programs, but refrain from expanding social service by relying on net welfare which encourage the provision of services within the family. A implication of our analysis is that the expansion of social welfare Korea saw after 1997 was not really an regime shift. According to the arguments of Peter Hall, first and second order changes in policy do not automatically lead to third order changes which imply regime shift. Policy changes which occurred during 1990s was not accompanied by a shift in policy paradigms. Family dependency in welfare is not yet changed.