• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.4
• /
• pp.455-462
• /
• 2011

This paper is about the design of a new gravity compensator for the lower body exo-skeleton device. The exo-skeleton devices is for increasing the torque of the human body joint for the purpose of helping the disabled, workers in the industry, and military soldiers. So far, most of studied exo-skeleton devices are actuated by the motors, but motors are limited in energy such that a short durability is always a big problem. In this paper, a new gravity compensator is proposed to reduce the torque load applied to human body joints due to gravity. The gravity compensator is designed using a tortional bar spring, and its structure and characteristics are studied through the test and computer simulation. A design concept on the exo-skeleton device using the gravity compensator is presented. An analysis and computer simulation on the torque reduction of the proposed exo-skeleton device that applies and non-applies the gravity compensator are performed.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2012.05a
• /
• pp.263-264
• /
• 2012

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2013.05a
• /
• pp.435-436
• /
• 2013

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2011.10a
• /
• pp.97-98
• /
• 2011

This paper is about the study of a new exo-skeleton device applying a gravity compensator. The exo-skeleton devices is to reduce the external torque applied to the human body joint for the purpose of helping the disabled, reducing heavy payload for industry workers or military soldiers. Most of the exoskeleton devices are actuated by the motors, but motors are limited in energy such that a short durability is always a big problem. In this paper, an exoskeleton device using a new gravity compensator based on a torsion bar is proposed to reduce the torque load applied to human body joints. The exoskeleton device is designed for the lower body of human. Analyses on the torsion bar spring and link of the exoskeleton device using FEM method were performed. To reduce the applied torque to the human joint, a torsion bar gravity compensator is applied to the exoskeleton. The effect of the torsion bar compensator for the exoskeleton device was verified through load test using developed test equipment.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2014.07a
• /
• pp.17-18
• /
• 2014

현대사회와 미래사회는 가속화되어지는 IT기술에 의해서 융합되어진 작업의 효율 및 성능의 발전이 이슈화되고 있다. 따라서 1990년대부터는 군사 및 재활분야와 함께 제조업 및 유통업 등 전반적인 산업 모두에서 근력보조기구에 대한 연구가 활발히 진행되고 있다. 과거에는 일반인이 무거운 짐을 운반하는 것을 완전한 로봇이 대체하거나 몸이 불편한 사회적 약자가 휠체어 및 지팡이 또는 전동 휠체어와 같은 보조 개념이 아닌 완전한 대체의 개념을 가지고 있었다. 그러나 웨어러블이 대두됨에 따라 기계와 인체가 합쳐지는 상호작용 근력보조기구가 탄생했다. 근력보조기구는 힘/토크 센서를 통한 인간과 로봇간의 상호작용에 의해 인간의 다양한 상지 및 하지 동작을 구현할 수 있는 근력 강화용 웨어러블 로봇 등이 있다.

• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.10
• /
• pp.933-938
• /
• 2010

In this paper, we propose the organization of a sensor system and user's intent detection algorithm for walking assist rehabilitation robots. The main purpose of walking assist rehabilitation robots is assisting SCI patients to walk in normal environment. To use walking assist rehabilitation robot in normal environment, it is needed to consider various factors about user's safety and detection of user's intent and so on. For these purposes, we have analyzed the use case of rehabilitation robots and organized the system of sensors for walking assist rehabilitation robots and finally, we have developed the algorithm which is used to detect user's intent for those. We applied our proposal method in the rehabilitation robot, ROBIN, and verified their effectiveness by normal, not patient.