• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.9
• /
• pp.1340-1349
• /
• 2012

Increasing the oxidation of fat through exercise is the recommendable method for weight control. Preceding researches have proposed increase in the usage of fat during exercise in stabilized state and under maximum exertion through aerobic training. However, such researches require additional equipment for gas analysis in order to measure the caloric value or gas exchange of subjects during exercise. Such equipments become highly restrictive for those exercise and cause substantially higher cost. According to this, we have presented the method of estimating the maximal fat oxidation point through changes in LF & HF which reflects changes in heart rate and the autonomic nervous system in order to induce exercise for a less restrictive and efficient fat oxidation than existing methods. We have conducted exercise stress test on subject with similar exercise abilities, and have detected the changes in heart rate and changes in LF & HF by measuring changes in fat oxidation and measuring ECG signals at the same time through a gas analyzer. Changes in heart rate and HRV of the subjects during exercising was detected through only the electrocardiographic signals from exercising and detected the point of maximum fat oxidation that differs from person to person. The experiment was carried out 16 healthy males, and used Modified Bruce Protocol, which is one of the methods of exercise stress test methods that use treadmill. The fat oxidation amount during exercise of all the subjects showed fat oxidation of more than 4Fkcal/min in the exercise intensity from about 5 minutes to 10 minutes. The correlation between the maximal fat oxidation point obtained through gas analysis and the point when 60% starts to be relevant in the range from -0.01 to 0.01 seconds for values of R-R interval from changes in heart rate had correlation coefficients of 0.855 in Kendall's method and in Spearman's rho, it showed significant results of it being p<0.01 with 0.950, respectively. Furthermore, in the changes in LF & HF, we have determined the point where the normalized area value starts to become the same as the maximal fat oxidation point, and the correlation here showed 0.620 in Kendall and 0.780 in Spearma of which both showed significant results as p<0.01.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.28 no.4
• /
• pp.905-917
• /
• 2018

The sovereign state has the right to engage in self-defense or war with the approval of the Security Council when it receives an invasion of territory from a foreign country. War is conducted under the principle of the necessity and proportionality of self-defense. In case of cyber attack, proportional countermeasure must be made through attack means and effect analysis, and cyber weapons need to be classified for this purpose. Therefore, this study aims to provide a rational and legitimate response according to the necessity and proportionality of the self - defense right by suggesting definition and classification criteria of cyber weapons. In this study, cyber weapons were defined as "means of collecting, attacking, and protecting information using cyber technology in the cyber space according to military objectives. Based on existing weapon systems and public cyber weapons cases, cyber weapons were classified as (1) cyber weapons for information gathering, (2) cyber weapons for attack, and (3) cyber weapons for protection. We suggest the considerations for applying the proportional response according to this functional classification. In order to guarantee the principle of proportionality to cyber attacks in the future, the classification study based on the cyber weapon effect should be conducted. This study has conducted an exploratory study on the classification of cyber clusters which constitutes one axis of the proportionality principle.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.36 no.5
• /
• pp.42-54
• /
• 2008

The objective of this study is to critically examine the result and the quality of urban park design as infrastructure by analyzing the landscape architectural design competition for Cheongna New City, which was organized by the Korea Land Corporation. This paper is meaningful in that it broadly examines several recent design competitions for urban parks, thereby discussing what the future urban park should be. This study explores the existing analysis methods of design competitions in order to establish a comprehensive method of analysis for the Cheongna competition. Through reinterpreting the concept of the urban park as infrastructure and the design strategies of landscape urbanism, nine key words and a framework for the analysis of urban park design are established. By analyzing the guidelines for the competition, five key words; networking, site, ecology, scale, and infrastructure have been selected and are used as the framework of analysis for the competition. The analysis of the contestants of the competition based on the proposed analysis method leads to a few implications for urban park design as infrastructure: networking and scale from the perspective of the development site; the creation of a sense of place and symbolism in creating the urban image; planning for an ecological urban environment; focus on the significance of the urban park as infrastructure. These implications are highlighted and discussed by the contestants through a variety of experiments. These ideas, however, are provided as a simple configuration of shapes and conceptual explanations and fail to be developed into synthetic, practical strategies.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.36 no.5
• /
• pp.64-72
• /
• 2008

The purpose of this study is to compare a habitat suitability grid unit included within a radius of 100m and $1km^2,\;2km^2,\;4km^2$ watershed units in order to predict suitable habitats for Chungcheong province's endangered leopard species(Prionailurus bengalensis). Other developed countries have carried out habitat assessment and established management policies for species conservation using such methods as HEP(Habitat Evaluation Procedures), HSI(Habitat Suitability Index) and GAP(Gap Analysis Program), etc. In accordance with these studies, many evaluation methods for habitat conservation have been proposed in Korea, but these studies are lacking in consideration of analytic units and general application of analysis results. This study predicted leopard habitat using a logistic regression analysis according to analytic units by data from 56 location and 8 sources of environmental data, including elevation, slope, forest area, land cover, roads, water, broadleaf trees, and human habitation. Moreover, the habitat suitability assessment unit was confirmed by a model comparison process encompassing model explanation. verification, and application on a regional scale. Results showed that assessment methods that took into consideration areas in and around the location points were beneficial in predicting habitat and that the assessment unit was appropriate for a 30m grid unit including areas within a radius of 100m and a $1km^2$ watershed unit in Chungcheong Province. This study suggests a method for regional habitat conservation to complement existing conservation area selection methods, and the results are expected to be used in conservation area selection and ecosystem management policies for endangered species.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.1
• /
• pp.433-438
• /
• 2006

When we consider to develop a new harbor, the most important factor, we think, is the lowest water depth of waterway and approaching channel for safe navigation of vesse. The existing harbors have been being dredged to meet the international trend of jumbo sized vessels by adopting the new design criteria. As the dredged materials over the expected at the design level were common and there are still lack of land based reclamation area, we have no choice to discharge the dredged materials in open sea area. In this study, we analysed the behavior of discharged materials at the dumping area of offshore open sea, which were collected from the dredging work at the waterway in Busan New Port. We measured the tidal currents and analyzed the waters of dumping site after the dumping work. these were used to evaluate the numerical models. Suspended Solids(SS) were introduced to the diffusion model. Because of the characteristics of the dumping site, the speed of initial diffusion and settle down of the discharged materials was so fast. Therefore, we believe that the dumped materials do not cause a significant impact to the marine environment.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.1
• /
• pp.495-500
• /
• 2006

Satellite systems for objects positioning appeared indispensable for performing basic tasks of maritime navigation. Navigation, understood as safe and effective conducting a vehicle from one point to another, within a specific physical-geographical environment. [Kopacz, $Urba{\acute{n}}ski$, 1998]. However, the systems have not solved the problem of accessibility to reliable and highly accurate information about a position of an object, especially if surveyed toward on-shore navigational signs or in sea depth. And it's of considerable significance for many navigational tasks, carried out within the frameworks of special works performance and submarine navigation. In addition, positioning precisely the objects other than vessels, while executing hydrographical works, is not always possible with a use of any satellite system. Difficulties with GPS application show up also while positioning such off-lying dangers as wrecks, underwater and aquatic rocks also other naturaland artificial obstacles. It is caused by impossibility of surveyors approaching directly any such object while its positioning. Moreover, determination of vessels positions mutually (mutual geometrical relations) by teams carrying out one common tasks at sea, demands applying the navigational techniques other than the satellite ones. Vessels'staying precisely on specified positions is of special importance in, among the others, the cases as follows: - surveying vessels while carrying out bathymetric works, wire dragging; - special tasks watercraft in course of carrying out scientific research, sea bottom exploration etc. The problems are essential for maritime economy and the Country defence readiness. Resolving them requires applying not only the satellite navigation methods, but also the terrestrial ones. The condition for implementation of the geo-navigation methods is at present the methods development both: in aspects of their techniques and technologies as well as survey data evaluation. Now, the classical geo-navigation comprises procedures, which meet out-of-date accuracy standards. To enable meeting the present-day requirements, the methods should refer to well-recognised and still developed methods of contemporary geodesy. Moreover, in a time of computerization and automation of calculating, it is feasible to create also such software, which could be applied in the integrated navigational systems, allowing carrying out navigation, provided with combinatory systems as well as with the new positioning methods. Whereas, as regards data evaluation, there should be applied the most advanced achievements in that subject; first of all the newest, although theoretically well-recognised estimation methods, including estimation [Hampel et al. 1986; $Wi{\acute{s}}niewski$ 2005; Yang 1997; Yang et al. 1999]. Such approach to the problem consisting in positioning a vehicle in motion and solid objects under observation enables an opportunity of creating dynamic and interactive navigational structures. The main subject of the theoretical suggested in this paper is the Interactive Navigational Structure. In this paper, the Structure will stand for the existing navigational signs systems, any observed solid objects and also vehicles, carrying out navigation (submarines inclusive), which, owing to mutual dependencies, (geometrical and physical) allow to determine coordinates of this new Structure's elements and to correct the already known coordinates of other elements.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.10a
• /
• pp.824-827
• /
• 2011

Needs for Smart Grid development are increasing all over the world as a solution to its problem according to depletion of energy resources, climatic and environmental rapidly change and growing demand for electrical power. Especially decentralized power is attracting world's attention. In this mood a new era for a unit scale of decentralized power environment is on its way in building. However there is a problem to have to be solved in the uniformity of power quality because the amount of power generated from renewable energy resources such as wind power and solar light is very sensitive to climate fluctuation. And thus this paper tries to suggest an energy management algorithm on basis of real time monitoring for meteorological data. The proposed EMS model embodies the method for predicting the power generation by monitoring and analyzing the climatic data and controling the efficient power distribution between the renewable energy and the existing power. The ultimate goal of this paper is to provide the technological basis for achieving zero-energy house.

• Journal of Navigation and Port Research
• /
• v.39 no.4
• /
• pp.299-305
• /
• 2015

Modbus is a serial communications protocol, it has since become a practically standard communication protocol, and it is now a commonly available means of connecting industrial electronic devices. Therefore, it can be connected with all devices using Modbus protocol to the measurement and remote control on the ships, buildings, trains, airplanes and etc.. In this paper, we add the Modbus communication protocol to the existing lighting controller sensitivity to enable verification and remote control by external environmental factors, and also introduces a fuzzy inference system was configured by external environmental factors to control LED lighting. External environmental factors of temperature, humidity, illuminance value represented by the LED through a fuzzy control algorithm, the values accepted by the controller through the sensor. Modbus is using the RS485 Serial communication with other devices connected to the temperature, humidity, illumination and LED output status check is possible. In addition, the remote user is changed to enable it is possible to change the RGB values in the desired color change. Produced was confirmed that the LED controller output is based on the temperature, humidity and illumination.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.34 no.3
• /
• pp.1-17
• /
• 2016

The main aim of this study is to provide an overview of the characteristics the Oungak (五雲閣) area on the north of rear garden of Gyeongbokgung Palace which was constructed during the time of king Kojong. This study also consider the aspect of functional elements of Ocryucheon (玉流川) located in Changdeokgung Palace and how the Oungak area was used as a substitute for the Ocryucheon. The Oungak area is the private space of the king. It was built in a natural setting which used existing environment including spring water and the rock carved with inscriptions 'Cheonha-Jaeil-Bokji (天下第一福地). King Kojong tried to replace Ocryucheon with Oungak area which had played a important role of relaxation and leisure for royal family at the Ocryucheon to reconstructed Gyeongbokgung Palace. Despite being away from each other, Oungak area seems quite similar to Ocryucheon area. Oungak area and Ocryucheon have a common conditions of a location and structure of the building. Both constructed on the northernmost part of rear garden, composition of buildings and the design of waterway estimated to function as Curve-Stream Banquet. Oungak area was consisted of Ocryeonjeong (玉蓮亭) Pavilion, Oungak Building, Byeokhwasil (碧華室) Building and Cheonha-Jaeil-Bokji-Cheon (天下第一福地泉) Spring and Streams. Except Byeokhwasil Building, spatial compositions of Oungak area showed pattern that were similar to Ocryucheon area. The area was developed, moreover, to unconventional space that depended on the conditions of topography, slope, water system. First, The Ocryeonjeong Pavilion constructed to view the landscape of Seoul to Namsan Mountain. Second, the peculiar form of Cheonha-Jaeil-Bokji-Cheon Streams is estimated the shape imitated from Curve-Stream Banquet on Ocryuchon. Third, Oungak Building was constructed like a habitable house with Nongsanjeong Building in Ocryucheon. The Oungak area was constructed to improve Gyeongbokgung Palace, Consequently, the Oungak area specially characteristic of Joseon palaces's rear garden.

• Journal of KIISE:Computer Systems and Theory
• /
• v.32 no.7
• /
• pp.349-358
• /
• 2005

False sharing is a result of co-location of unrelated data in the same unit of memory coherency, and is one source of unnecessary overhead being of no help to keep the memory coherency in multiprocessor systems. Moreover. the damage caused by false sharing becomes large in proportion to the granularity of memory coherency. To reduce false sharing in a page-based DSM system, it is necessary to allocate unrelated data objects that have different access patterns into the separate shared pages. In this paper we propose call-site tracing-based shared memory allocator. shortly CSTallocator. CSTallocator expects that the data objects requested from the different call-sites may have different access patterns in the future. So CSTailocator places each data object requested from the different call-sites into the separate shared pages, and consequently data objects that have the same call-site are likely to get together into the same shared pages. We use execution-driven simulation of real parallel applications to evaluate the effectiveness of our CSTallocator. Our observations show that by using CSTallocator a considerable amount of false sharing misses can be additionally reduced in comparison with the existing techniques.