• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.1
• /
• pp.703-712
• /
• 2015

This paper proposes the UIGRP, which can tackle the problem of the network disconnection and packet transmission delay caused by turning vehicles frequently in an urban intersection. The UIGRP was designed as follows. First, it calculates the direction of vehicles using the moving direction of vehicles and the location of a destination. Second, it makes the RSU measure the density of an urban intersection. Third, the TGF Algorithm in the UIGRP decides the data transmission paths by setting as an intermediate node, not only the vehicle that is moving in the direction where a destination node is located, but also the node that has the highest density. The TGF algorithm using a moving direction and density minimizes or removes the occurrence of local maximum problems that the existing Greedy Forwarding algorithm has. Therefore, the simulation result shows that UIGRP decreases the occurrence of local maximum problems by 3 and 1 times, and the packet transmission time by 6.12 and 2.04(ms), and increases the success rate of packet transmission by 15 and 3%, compared to the existing GPSR and GPUR.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.9 no.3
• /
• pp.26-38
• /
• 2006

For both a healthy environment and sustainable development, we frame a habitat assessment method, concerning biodiversity and physical characteristics. With the method, we set up and extract conservation areas from Peace Valley Resort Development Areas which can function as habitats. Absolute and relative assessment items which are the size of area, habitation of species with conservation value, distribution of communities, functions of habitats, ratio of non-native plants, connectivity of habitats, vegetation layers of forests and age of forests, and water systems are considered on newly extracted conservation areas, and the habitat value assessment was calculated on the items in a 3-point scale. By comparing and examining 3 existing proposals for extracted conservation areas, we assess existing proposals, make an alternative proposal, and try to verify the possibility of applicability to extracted conservation areas. Proposal A and C must not be adopted since almost all conservation areas would be developed in the proposals. Proposal B, consisting of 53% development areas and 47% non-development areas, does not have enough development areas, so high density building arrangements should be encouraged in order to preserve conservation areas. Therefore, proposal B would be the best in ecological terms among the 3 proposals, if 3 conditions are considered : 1) new extracted conservation areas should be conserved; 2) 10~15m wide green-zones on both sides of the water system, which can play a role as ecological corridors, should be considered in development areas; 3) building arrangement should not interrupt the ecological corridors.

• Design & Manufacturing
• /
• v.11 no.1
• /
• pp.45-49
• /
• 2017

Currently, a lot of efforts to make increases the manufacturing efficiency have tried and there is growing the interest to implementing the machining operation through CAM automation and optimization. This kind of movement has shown gradually in 5X milling as well as 3X milling task. By the way, in case of 5X milling, it is difficult to hire the CAM experts who is an experience for 5X machining and also it has too big trouble to use them due to high cost. For this reason, you can see the manufacturer who is concern the CAM S/W to provide the NC automation program that beginners can generate easily the 5X milling in short term and the existing 5X milling process can be improved. These requirements need to make a NC automation process including the practical machining strategies same as the generation by NC expert. In order to support this, it is necessary to directly apply the 3D machining part based on NC template which includes the machining procedures, standard cutter library, auto machine area selection, analyze tool for part shape, machining condition setting considering the material stiffness to be provided by CimatronE and it should be created the 5axis machining data by a minimized operation. With user-friendly, CimatronE's NC machining automation tools improve the 5-axis machining process and speed up the process, maximizing work efficiency and improving product productivity compared to existing machining tasks.

• The Transactions of the Korea Information Processing Society
• /
• v.5 no.6
• /
• pp.1441-1456
• /
• 1998

The concept of a hyperpresmtation, as an extension of a hypermedia, is the presentation in which time-varying multimedia presentations are dynamically linked together and a hyperlink's context can be changed over time at any time during a continuous presentation. Problems caused by integrating the hyperpresentation into an existing multimedia system which handles a sequential presentation only are, how to describe the hyperprcsentation, how to set up a hyperlink on a continuous media, and how to check the consistency of the synchronized presentations. In this paper. a new synchronization description method for the hyperpresentation and a method for setting a hyper link on a continuous media during" presentation are proposed after havin!; SHrvey of existing methods, The proposed method deals with only the DC value in a stream ut a DCT based compressed data for checking a condition of te link. Finally, the method for checking the consistency of mixed presentations before actual play of the hnlerpresentation is described. Proposed methods are implemented on MuX(Multimedia IO Server) where a sample scenario is tested.

• Journal of KIISE
• /
• v.45 no.2
• /
• pp.187-194
• /
• 2018

Recently, Hypertext Transfer Protocol (HTTP) adaptive streaming service is attracting attention. The existing quality adaptive scheme of HTTP adaptive streaming service adjusts the video quality according to the network bandwidth or the client buffer size. However, the problem with the existing quality adaptive scheme is the QoE (Quality of Experience) degradation caused by the unnecessary quality change that occurs due to frequent bandwidth change or fixed buffer threshold. We propose a video quality maintenance scheme that improves average video quality and minimizes unnecessary quality change in order to improve the QoE of HTTP adaptive streaming service in the changing network environment. The proposed scheme maintains high quality for a long time by setting the quality maintenance duration to be long when buffer occupancy and video quality are high. The experimental results show that the proposed scheme improves QoE by improving the average video quality and minimizing the quality change.

• Journal of the Korea Convergence Society
• /
• v.11 no.2
• /
• pp.1-8
• /
• 2020

In this paper, we propose an optimal path search algorithm between each node and midpoint that applies the time weighting. Services for using a location of mid point usually provide a mid point location-based on the location of users. There is a problem that is not efficient in terms of time because a location-based search method is only considered for location. To solve the problem of the existing location-based search method, the proposed algorithm sets the weights between each node and midpoint by reflecting user's location information and required time. Then, by utilizing that, it is possible to search for an optimum path. In addition, to increase the efficiency of the search, it ensures high accuracy by setting weights adaptively to the information given. Experimental results show that the proposed algorithm is able to find the optimal path to the midpoint compared with the existing method.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.11a
• /
• pp.513-516
• /
• 2008

Recently, a demand for reduction of construction cost by reducing construction period is increasing because of the slump of the construction business, the increasing price of raw-materials and the enforcement of after-sale system. As a method of reducing construction period, many construction companies usually apply a method of reducing curing period. But if they use an existing early strength cement or admixture, they spend a heavy cost on materials and there are many problems, such as a heat of hydration and a loss of workability. The purpose of this research is a reduction of construction cost by reducing construction period as a earlier removal time of form. To check up application of concrete using high early strength binder and admixture, comparative tests were carried out with concrete using an existing early strength cement or admixture such as tests of diurnal variation, setting time and compressive strength.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.5 no.3
• /
• pp.78-83
• /
• 2010

This paper presents the feasibility of incorporating ultrafine particles collected in the separator bag filter (separator bag filter cement, SBFC) during the cement manufacturing process as an substitution material for cement. SBFC does not require additional processes needed in the existing processes to manufacture high early strength cement such as modifying mineral components and adjusting the firing temperature. Moreover, it can also solve the issue of efficiency decrease resulted from the increase of the grinding time applied in the existing process of manufacturing microcement. Therefore, this research has examined the characteristics of SBFC and fresh properties and mechanical properties after making paste and mortar using SBFC in order to use SBFC as a material to gain early strength of concrete. For results, analyzing the chemical composition and physical properties of SBFC, its blaine value was $6,953cm^3/g$, about double than that of OPC, but its chemical composition showed no significant difference. According to the result of the paste and mortar examination, the paste and mortar mixed with SBFC showed a lower flowability, earlier setting time, and higher compressive strength than that with OPC. The result of microstructure analysis of paste, the paste mixed with SBFC indicated about 9% lower internal porosity at an early age than that of OPC. The compressive strength and flexural strength of mortar were higher in the order of SBFC ratio of 100, 50 and 0% SBFC.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.41 no.4
• /
• pp.85-94
• /
• 2004

Object tracking in a real time image is one of interesting subjects in computer vision and many Practical application fields during the past couple of years. But sometimes existing systems cannot find all objects by recognizing background noise as object. This paper proposes a method of object detection and tracking using adaptive background image in real time. To detect object which is not influenced by illumination and to remove noise in background image, this system generates adaptive background image by real time background image updating. This system detects object using the difference between background image and input image from camera. After setting up Minimum Bounding Rectangle(MBR) using the internal point of detected object, the system tracks object through this MBR In addition, this paper evaluates the test result about performance of proposed method as compared with existing tracking algorithm.

• Journal of Information Technology Services
• /
• v.9 no.1
• /
• pp.43-56
• /
• 2010

With the improvement of the Information Technology and the change of the business environment, the dependency of business on the Information Technology shows sharply increase. The Information Technology, however, is centered on the support of the technology viewpoint and thus the influence and effect of Information Technology on the business is hardly analyzed. The information system, therefore, requires not only technology-centric support management but service-oriented and systematic introduction of Information Technology Service Management(ITSM). The domestic ITSM market is currently expanding into variety of industries like finance, telecommunication, manufacturing and public service and at the same time the consequent reconstruction process of information system is continuously under way so as to qualify for the ISO 20000 certification. Especially the public organizations rapidly adopt the ITSM, in order to improve the quality of public service together with a goal of realizing the electronic government and of managerial innovation. The existing ITSM still, however, shows the tendency of depending only on the system construction and the management on the visible requirements whereas the overall process is not likely being improved. Hence, this study suggests, focusing on the life cycle of service, the model of ITSM based on Information Technology Infrastructure Library(ITIL) v3 which is appropriate for the public service. We expect, as stated in this study, that our ITSM model shall be widely accepted to the public agencies who promote the advance campaign by setting up the ITSM or reconstructing the existing process.