• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2008년도 정기총회 및 학술발표대회
• /
• pp.529-532
• /
• 2008

Recently the compound material has interested in using the structural material as the bridge member assembly. It is the lighter material against existing construction material and has excellent durability and economy. The existing floor of bridge has its short period to repair and replace compared to other parts of the bridge with the pavement and the shoe. These deteriorations of usage and safety by aging and corrosion are needed frequent maintenance. The use of compound material as a structural member suggests solve these problems. So this thesis evaluates the static and the fatigue performance for whether there are fiber lamination direction and stress concentration section of FRP floor plate, the compound material.

• 콘크리트학회지
• /
• 제27권6호
• /
• pp.24-30
• /
• 2015

• 한국강구조학회 논문집
• /
• 제11권3호통권40호
• /
• pp.301-309
• /
• 1999

본 연구의 목적은 소성영역에서의 철골 부재내에 존재하는 존재응력을 추정하는 법을 개발하기 위함이다. 여기에선 선행 실험 연구를 근거로 하여 응력집중 현상에 기인한 국부 소성화를 고려하여 보정계수법이 제안되었다. 구멍주위의 응력 분포를 파악하기 위하여 유한요소 해석을 수행하였고, 그 결과를 탄 소성역에서의 구멍내기법에 의한 결과와 비교하였다. 보정계수법을 적용한 결과, 본 연구에서 제안된 방법은 실재 초기 존재응력값과 약 2% 정도의 오차를 가진 매우 좋은 결과치를 나타냈다.

• 한국터널지하공간학회 논문집
• /
• 제21권5호
• /
• pp.675-687
• /
• 2019

최근 대도시에는 교통량의 증가와 높은 토지 보상비 등으로 인해 도로 확충 시 대심도 복층 터널의 필요성이 증가하고 있으며, 국내에서도 일반적인 터널보다 단면이 작고 지하에서 다른 터널과 교차하는 네트워크형 터널이 계획되고 있다. 본 연구에서는 쉴드 터널 분기부에 있어서 기존 터널과 확폭부를 연결하는 연결상세에 있어 기존의 전단면 강재 접합부 대신 휨모멘트가 크게 발생하는 연결부에만 강재를 사용하는 부분 강재-콘크리트 접합부 상세와 쉴드 터널 분기부의 확폭 구간의 해석은 3차원 거동효과를 반영하기 위해 확폭부 시종점 구간의 기둥 효과와 종방향 부재의 강성효과를 고려할 수 있는 2차원 해석모델을 검토하였다. 2차원 해석기법으로 확폭부 시종점 구간에서 종방향 부재의 강성을 횡방향 모델에서 연결부의 탄성스프링 지점으로 고려하여 종방향 부재의 강성과 시종점부의 기둥효과를 반영하는 방법을 제안하였다. 제안된 2차원 해석기법을 이용한 구조해석 결과 일정값 이상의 강성을 갖는 종방향부재를 도입하면 접합부와 박스부의 휨모멘트를 저감 시킴으로써 부분 강재-콘크리트 접합부의 구조 안전성을 확보할 수 있는 것으로 검토되었다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 봄 학술발표회 논문집
• /
• pp.455-460
• /
• 2002

In this study, a numerical analysis that can effectively predict the effect of strengthening of cracked flexural members is developed using axial deformation link elements. Concrete and interface between concrete and repair material are considered as quasi-brittle material. Reinforcing bars and reinforcing steel plates are assumed to perform as elasto-plastic materials. Unloading behavior of axial deformation link element is implemented. In the developed numerical model, a flexural member is intentionally cracked by pre-loading, then, the cracked member is repaired using extra elements, and reloaded. The results from analysis of repaired flexural members agrees well with available experiment results. Also, it was shown that the effect of strengthening and the change of failure mode with respect to the time for strengthening and thickness of repair materials. Based on the results, it was determined that the developed numerical model has a good agreement for determining failure modes and effect of strengthening in cracked flexural members. By utilizing the developed numerical analysis, the time and dimension of external strengthening in an existing cracked flexural member with predition of failure mechanism can be determined.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2003년도 추계 학술발표회논문집
• /
• pp.239-246
• /
• 2003

A new earthquake design method performing iterative calculations using secant stiffness was developed. The proposed design method has the advantages of convenience and stability in numerical analysis because it uses elastic analysis. At the same time, the proposed design method can accurately estimate the strength and ductility demands on the members because it performs the analysis on the inelastic behavior of structure using iterative calculation. In the present study, the procedure of the proposed design method was established, and a computer program incorporating the proposed method was developed. Design examples using the proposed method were presented, and its advantages were presented by the comparisons with existing design methods using elastic or inelastic analysis. The proposed design method, as an integrated method of analysis and design, can address the earthquake design strategy devised by the engineer, such as ductility limit on each member, the design concept of strong column - weak beam, and etc. Through iterative calculations on the structure preliminarily designed only with member sizing, the strength and ductility demands of each member can be directly calculated so as to satisfy the given design strategy As the result economical and safe design can be achieved.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2022년도 봄 학술논문 발표대회
• /
• pp.229-230
• /
• 2022

With the development of digital technology, construction companies at home and abroad are in the process of computerizing work and site information for the purpose of improving work efficiency. To this end, various technologies such as BIM, digital twin, and AI-based safety management have been developed, but the accuracy and completeness of the related technologies are insufficient to be applied to the field. In this paper, the learning data that has undergone a pre-processing process optimized for recognition of construction information based on structural members is trained on an existing artificial intelligence model to improve recognition accuracy and evaluate its effectiveness. The artificial intelligence model optimized for the structural member created through this study will be used as a base technology for the technology that needs to confirm the safety of the structure in the future.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 봄 학술논문 발표대회
• /
• pp.117-118
• /
• 2023

Estimating the construction period at the initial stage of the project and determining whether it is appropriate is very important for the developer's decision-making and the success of the construction company's business. Existing researchers have conducted various studies to calculate the appropriate construction period, but there is no study on the influencing factors and methodology for the construction period of beam-column PC apartment building frame construction. The purpose of this study is to calculate the PC member assembly time using the mathematical algorithm of PC member assembly. The results of this study can be used as basic data to calculate the construction date of the standard floor of PC construction.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 추계 학술발표회 제20권2호
• /
• pp.293-296
• /
• 2008

철근콘크리트 구조물의 사용성을 검토할 때 처짐은 가장 중요한 사항 중 하나이며, 철근콘크리트 휨 부재의 처짐은 일반적으로 유효 단면2차모멘트의 개념을 적용하여 구해진다. 그러나 이미 사용중인 철근콘크리트 보에서 정확한 사용하중을 알기 어려운 경우에는 기존의 방법으로 처짐을 계산하는 것이 쉽지 않다. 따라서, 이 연구에서는 철근콘크리트 보에서 균열과 처짐은 상호 밀접한 관련이 있다는 사실을 바탕으로 작용하는 하중의 크기에 무관하게 철근 콘크리트 보 부재의 균열 상태로부터 처짐을 쉽게 산정할 수 있는 방법을 제안하고자 하였다. 균열폭의 합, 평균변형률 및 곡률 등의 관계를 이용하여 처짐식을 제안하였으며, 수정계수를 적용하여 보다 정확한 처짐식을 제안하고자 하였다. 이 제안식을 사용할 경우, 철근콘크리트 보에 작용하는 하중 크기에 무관하게 균열을 측정함으로써 처짐 추정치를 얻을 수 있으며, 유효 단면 2차 모멘트 값을 산출하여 처짐을 산정하는 기존의 방법에 비해 비교적 간단하게 처짐을 산출 할 수 있다. 그러나, 하중에 관계없이 균열폭으로만 처짐을 추정하므로 기존의 처짐 예측식에 비해 정확도가 다소 낮을 수 있으며, 부재의 전 구간에 걸친 균열폭 측정이 수행되어야 하는 한계성이 있다.

• International Journal of Costume and Fashion
• /
• 제3권
• /
• pp.121-139
• /
• 2003

A purpose of this study is to measure degree of solidarity and conflict of the beauty salon franchisees according to an influence strategy of franchiser and grasp characteristics revealed from managing a franchise system. This will also contribute to improving results of franchise systems and considering a direction for development. This study examined existing studies relevant with conflict and solidarity and analysed relativity between relevant variables and grasped the flow of studies and then set hypotheses in order to present a device for decreasing conflict within a franchise system of beauty shops and for increasing a solidarity and subsequently analysed samples and tested data. The data for this study are researched by sending questionnaires to beauty salons which participated in one of franchise systems and they are analyzed by various methods in a statistics. After studying some relevant theories, this study used the definition of the franchise system in beauty salons as an entity of a political-economy paradigm. A franchiser desires to influence member shops with an influence-strategy. Therefore member shops which perceived it go through a conflict and then such a process is revealed as making significant influence on solidarity. Beauty salon franchise exists by reciprocal confidence and transaction. If an opportunism gain in influence owing to an conflict intensification, there would be no steady formation of relationship. Therefore the head office should develop a member-shop-management-system by more scientific and more technical methods and prevent, in advance, member stores from seeking for negative opportunism.