• Journal of Korea Entertainment Industry Association
• /
• v.14 no.8
• /
• pp.103-116
• /
• 2020

This paper starts with the recognition of the problem of the need for a link between text-centered acting and body-centered acting. This study is focused on Brecht's theory of acting to overcome loss of presence by repetition which have been discussed many times by not only actors, but also acting educators. Brecht's acting theory has already been mentioned by many researchers as an alternative to conventional actor training. However, not many studies have been conducted on practical applicable methods. The purpose of this study is to provide the basis for the actual practice of Brecht acting and possibility that his acting theory can serve as a link between text and body-centered acting theory. As a research method, we first conduct theoretical considerations on the concepts and limitations of text-centered representational acting and body-centered post-drama acting. Then distinguish between text and body-centered acting tools among Brecht's epic theatre, to summarize the terms and concepts he uses and to identify the existing effects he reaches while acting. Finally, this paper proposes an teaching model that transforms and develops Brecht's acting theory through the writer's teaching experience. However, there are limitations in generalizing its effectiveness because this study is based on the writer's experience. We hope that further research will help the diversity of acting education by developing in-depth insights on Brecht acting theory and various models of acting teaching methods.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.24 no.2
• /
• pp.153-170
• /
• 2022

Waterjet has been comprehensively used in urban areas owing to a suitable technique for cutting concrete and rock, and low noise and vibration. Recently, the abrasive waterjet technique has been adopted and applied by the Korea Atomic Energy Research Institute to demolish concrete plugging without disturbing and damaging In-situ Demonstration of Engineered Barrier System in the disposal research tunnel. In this study, the use of abrasive waterjet in the tunnel was evaluated for practical applicability and the existing cutting model was compared with the experimental results. As a variable for waterjet cutting, multi-cutting, water flow rate, abrasive flow rate, and standoff distance were selected for the diversity of analysis. As regarding the practical application, the waterjet facilitated path selection for cutting the concrete plugging and prevented additional disturbances in the periphery. The pump's noise at idling was 64.9 dB which is satisfied with the noise regulatory standard, but it exceeded the standard at ejection to air and target concrete because the experiment was performed in the tunnel space. The experimental result showed that the error between the predicted and measured cutting volume was 12~13% for the first cut and 16% for second cut. The standoff distance had a significant influence on the cutting depth and width, and the error tended to decrease with decrement of standoff distance.

• Journal of Korea Port Economic Association
• /
• v.37 no.4
• /
• pp.89-102
• /
• 2021

The purpose of this paper is to study the impact of shipping service firm's perceived relational benefits on switching barriers and loyalty focusing on tug boat service. To achieve the purpose of the research, literature survey on existing literature, thesis, research report is performed and also reliability analysis, validity test and multiple regression analysis using SPSSWIN 18.0 is used in this research. To verify a research model and hypothesis, a questionnaire survey among employees of shipping companies and shipping agencies was executed. 76 copies of total 200 copies of questionnaires were collected and the number of questionnaire used for empirical analysis was 76 copies. The main results of the study are summarized as below. First, Hypothesis 1 "shipping service firm's perceived relational benefits has a positive impact on the switching barrier" was supported by this study. Second, Hypothesis 2 "shipping service firm's perceived relational benefits has a positive impact on the loyalty" was supported in this research. Finally, Hypothesis 3 "switching barrier has a positive impact on the customer's loyalty" was also supported. Further research can be extended by adding more questionnaires including more shipping service firms all over the nation.

• Journal of Industrial Convergence
• /
• v.20 no.1
• /
• pp.53-62
• /
• 2022

The election broadcast began utilizing virtual studios in the mid-1990s. In 1996, SBS's virtual studio was evaluated as an innovation in Korean broadcasting technology that introduced the world's first virtual studio. However, there have been cases where KBS and MBC named it a virtual studio and used it for election broadcasting. Various CG (Computer Graphics) case studies of election broadcasting have been conducted since the 2000s, but the initial research is inadequate. Therefore, this paper complements existing research by analyzing the cases of the mid-1990s when they actually started using virtual studios. Beginning with SMOCKEY (KBS) and MAGICII (MBC) in 1995, we presented the initial model of the virtual studio, and then with SBS Virtual Studio, each broadcasting company evolved into the names Dream Studio (KBS) and Space 21 Studio (MBC). As a result of the analysis, it was found that the election broadcast is a chart showing the data and the winning prediction, and that the election broadcast was the trigger to compose the story based on the introduction of the virtual studio. It is a form of historical research dealing with the value of the early virtual studios in this paper. It is meaningful to see the process of Remediation.

• Journal of Internet Computing and Services
• /
• v.22 no.6
• /
• pp.33-40
• /
• 2021

Automatic Speech Recognition(ASR) is a technology that analyzes human speech sound into speech signals and then automatically converts them into character strings that can be understandable by human. Speech recognition technology has evolved from the basic level of recognizing a single word to the advanced level of recognizing sentences consisting of multiple words. In real-time voice conversation, the high recognition rate improves the convenience of natural information delivery and expands the scope of voice-based applications. On the other hand, with the active application of speech recognition technology, concerns about related cyber attacks and threats are also increasing. According to the existing studies, researches on the technology development itself, such as the design of the Automatic Speaker Verification(ASV) technique and improvement of accuracy, are being actively conducted. However, there are not many analysis studies of attacks and threats in depth and variety. In this study, we propose a cyber attack model that bypasses voice authentication by simply manipulating voice frequency and voice speed for AI voice recognition service equipped with automated identification technology and analyze cyber threats by conducting extensive experiments on the automated identification system of commercial smartphones. Through this, we intend to inform the seriousness of the related cyber threats and raise interests in research on effective countermeasures.

• Journal of Korean Society of Rural Planning
• /
• v.27 no.4
• /
• pp.55-70
• /
• 2021

In this study, in the field of remote sensing, where the scope of application is rapidly expanding to fields such as land monitoring, disaster prediction, facility safety inspection, and maintenance of cultural properties, monitoring of rural space and surrounding environment using UAV is utilized. It was carried out to verify the possibility, and the following main results were derived. First, the aerial image taken with an unmanned aerial vehicle had a much higher image size and spatial resolution than the aerial image provided by the National Geographic Information Service. It was suitable for analysis due to its high accuracy. Second, the more the number of photographed photos and the more complex the terrain features, the more the point cloud included in the aerial image taken with the UAV was extracted. As the amount of point cloud increases, accurate 3D mapping is possible, For accurate 3D mapping, it is judged that a point cloud acquisition method for difficult-to-photograph parts in the air is required. Third, 3D mapping technology using point cloud is effective for monitoring rural space and rural resources because it enables observation and comparison of parts that cannot be read from general aerial images. Fourth, the digital elevation model(DEM) produced with aerial image taken with an UAV can visually express the altitude and shape of the topography of the study site, so it can be used as data to predict the effects of topographical changes due to changes in rural space. Therefore, it is possible to utilize various results using the data included in the aerial image taken by the UAV. In this study, the superiority of images acquired by UAV was verified by comparison with existing images, and the effect of 3D mapping on rural space monitoring was visually analyzed. If various types of spatial data such as GIS analysis and topographic map production are collected and utilized using data that can be acquired by unmanned aerial vehicles, it is expected to be used as basic data for rural planning to maintain and preserve the rural environment.

• Korean Journal of Remote Sensing
• /
• v.38 no.5_3
• /
• pp.901-912
• /
• 2022

The frequency of disasters is increasing due to global climate change, and unusual heavy rains and rainy seasons are occurring in Korea. Periodic monitoring and rapid detection are important because these weather conditions can lead to drought and flooding, causing secondary damage. Although research using optical images is continuously being conducted to determine the waterbody, there is a limitation in that it is difficult to detect due to the influence of clouds in order to detect floods that accompany heavy rain. Therefore, there is a need for research using synthetic aperture radar (SAR) that can be observed regardless of day or night in all weather. In this study, using Sentinel-1 SAR images that can be collected in near-real time as open data, the UNet model among deep learning algorithms that have recently been used in various fields was applied. In previous studies, waterbody detection studies using SAR images and deep learning algorithms are being conducted, but only a small number of studies have been conducted in Korea. In this study, to determine the applicability of deep learning of SAR images, UNet and the existing algorithm thresholding method were compared, and five indices and Sentinel-2 normalized difference water index (NDWI) were evaluated. As a result of evaluating the accuracy with intersect of union (IoU), it was confirmed that UNet has high accuracy with 0.894 for UNet and 0.699 for threshold method. Through this study, the applicability of deep learning-based SAR images was confirmed, and if high-resolution SAR images and deep learning algorithms are applied, it is expected that periodic and accurate waterbody change detection will be possible in Korea.

• Journal of Broadcast Engineering
• /
• v.26 no.4
• /
• pp.429-440
• /
• 2021

With the recent development of deep convolutional neural network learning, deep learning techniques applied to single image super-resolution are showing good results. One of the existing deep learning-based super-resolution techniques is RDN(Residual Dense Network), in which the initial feature information is transmitted to the last layer using residual dense blocks, and subsequent layers are restored using input information of previous layers. However, if all hierarchical features are connected and learned and a large number of residual dense blocks are stacked, despite good performance, a large number of parameters and huge computational load are needed, so it takes a lot of time to learn a network and a slow processing speed, and it is not applicable to a mobile system. In this paper, we use the residual dense structure, which is a continuous memory structure that reuses previous information, and the residual dense channel attention block using the channel attention method that determines the importance according to the feature map of the image. We propose a method that can increase the depth to obtain a large receptive field and maintain a concise model at the same time. As a result of the experiment, the proposed network obtained PSNR as low as 0.205dB on average at 4× magnification compared to RDN, but about 1.8 times faster processing speed, about 10 times less number of parameters and about 1.74 times less computation.

• Journal of Korea Trade
• /
• v.25 no.3
• /
• pp.21-47
• /
• 2021

Purpose - Offshoring has emerged as one of the major trends in international trade and has become one of the strategies for achieving competitiveness in the global market. In spite of this, the expected gains of offshoring can be offset by hidden costs and risks, such as those associated with the COVID-19 pandemic, the trade war between the USA and China, and the ongoing trade dispute between Korea and Japan. To obviate such business failure and prevent critical business blunders, offshoring strategies that efficiently consider both risk elements and potential wealth creation are urgently need. The first purpose of this study is to contribute to the development of more advanced offshoring strategies to help host countries select the best locations to manage supply chain risks and create unique value. The second purpose is to specifically analyze the current status of Korea and provide Korean companies with implications to be considered when deciding whether to offshore or re-shore. Design/methodology - A Network DEA model was applied to measure the comparative location efficiency of national competencies for offshoring strategy from perspectives of wealth creation opportunities (profitability and marketability) and supply chain risk management. The location efficiencies are compared among a total 70 countries selected from the Global Competitiveness Index (GCI) and globally attractive locations outlined by Kearney (2017). For the secondary analysis of efficiency, a t-test examining the nature of competitive advantage and the level of sophistication in production processes was implemented in three divisions. We then analyzed differences in offshoring performance in terms of the identified national traits. Moreover, Tobit regression analysis is conducted to investigate the correlation between value-added business activities and each divisional efficiency, seeking to determine how each degree of value-added business activity influences the increase in offshoring productivity. Findings - Regarding overall location efficiency for offshoring performance, only the USA and Italy were identified as being efficient as host countries for offshoring, under circumstances of advanced development, such as productivity and risk management. Korea ranks 13th among 70 countries. The determinants of national competitiveness depend on national traits (the nature of competitive advantage and business sophistication). Countries with labor/resource advantages and labor-intensive industries are more competitive in terms of marketability than others. In contrast, countries with strong technology-intensive industries benefit offshoring companies, particularly in the technology sector, with the added advantage of supply chain risk management. As the perception of a value chain is broader in a country, it can achieve both production sophistication and competitive advantages such as marketability and SCRM. Originality/value - Existing studies focus on offshoring effectiveness from a company perspective. This paper contributes to comparing country efficiency in producing core competencies related to an offshoring strategy and also segments countries into three performance-based considerations associated with the global offshoring market. It also details Korea's position as an offshoring location according to national efficiency and competency.

• Journal of the Korean Society of Floral Art and Design
• /
• no.45
• /
• pp.47-56
• /
• 2021

It was applied by making the models such as the prior learning (e-learning), modeling by manual, learner's practice, 1:1 teaching coaching, self evaluation, coaching behavior assessment(primary, secondary), and self-directed practice. First, the cognitive practice education through the prior learning is very essential in the practice of floral design. Second, the practice class of floral design is a class where the professor generally set an example first, and the learners followed. Third, this study was to prepare the checklist, reflect it through the self evaluation, and prepare the evaluation form in accordance with the element, principle, and technical parts of floral design about the finished works. Fourth, contrary to the existing class completing within the class hour, the practice class is a process of trying to do self-directed practice, returning to home. Fifth, this study was to evaluate the works the learner made once again through the sketching and photographing by placing the work process of portfolio at the last step. To conclude, this study has found that such series of process through six steps on the practice form by the learner only would be excellent teaching learning model to improving the basic capacity of floral design. Accordingly, the development of teaching materials related to this and adaptation in the field in the future is considered as it will be very helpful to the learners' self-directed learning.