• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.921-924
• /
• 2008

We investigated new deep blue emitting materials including a novel side group such as CB-203. CB-203 shows relatively 40% increased PL quantum efficiency and higher Tg of $30^{\circ}C$ compared to MADN. It exhibits high External Quantum Efficiency (EQE) of 7.18% that is two times bigger than MADN's, which is the best efficiency in case of non-doped blue fluorescence OLED device to our knowledge. And deep blue emitting materials with a new core structure (CB-301) have been synthesized. CB-301 exhibit excellent blue fluorescence properties. Undoped OLED devices using CB-301 as blue emitters was found to deep blue CIE value (0.154, 0.078) and exhibit high luminance efficiencies of 2.01cd/A at $10\;mA/cm^2$.

• Journal of the Korean Society of Mechanical Technology
• /
• v.13 no.2
• /
• pp.9-19
• /
• 2011

Most real world design evaluation and risk-based decision support combine quantitative and qualitative (linguistic) variables. Decision making based on conventional mathematics that combines qualitative and quantitative concepts always exhibit difficulty in modelling actual problems. The successful selection process for choosing a design/procurement proposal is based on a high degree of technical integrity, safety levels and low costs in construction, corrective measures, maintenance, operation, inspection and preventive measures. In this paper, a design decision support framework using a composite structure methodology grounded in approximate reasoning approach and evidential reasoning method is suggested for design evaluation of machinery space of a ship engine room at the initial stages. An illustrative example is used to demonstrate the application of the proposed framework.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.26 no.8
• /
• pp.1164-1171
• /
• 2002

This study analyzed the dependence of part load performance of simple cycle gas turbines on their design performance. Various parametric calculations were carried out to examine effects of design temperature ratio, pressure ratio and component efficiencies using a simplified analysis. In addition, a more practical analysis was done for realistic design conditions with the aid of a comprehensive performance analysis program. The results show that gas turbines with higher design performance exhibit less efficiency degradation during part load operation. The influence of power control method (fuel only centre) and air flow control) on part load performance was examined as well.

• The Research Journal of the Costume Culture
• /
• v.9 no.1
• /
• pp.127-140
• /
• 2001

The purpose of this study is to examine the effect of the style of textile pattern design on the process of building the fashion brand identity. In so doing, the study analyzes the color, style, and layout of the motive, and the drawings of the patter of textile of top seven Italian fashion brands which present in presented eight fashion design collections during the 1997∼2000 period. The results of the analysis show that the seven brands exhibit their unique characteristics of the color, style, and layout of the motive, and the drawings of the pattern of textile. The results can be interpreted in a way that their distinct features oft textile pattern design indeed contribute toward the establishment of their unique brand image and brand identity. The results of this study suggests that to initiate the top fashion brand, the fashion industry should develop its own unique style of textile pattern design.

• Journal of Korean Society for Quality Management
• /
• v.27 no.2
• /
• pp.218-236
• /
• 1999

The purpose of parameter design is to determine optimal settings of design parameters of a product or a process such that the performance characteristics of a product exhibit small variabilities around their target values. Taguchi made significant contributions in this area. However, his analysis of the problem focused on only one performance characteristic or response, although in product and process design, multiple characteristics are more common. The critical problem in dealing with multiple characteristics is how to compromise the conflict among the selected levels of the design parameters for each individual characteristic. In this paper, Methodology using SN ratio optimized by univariate technique is proposed and a parameter design procedure to achieve the optimal balance among several different response variables is developed. Existing case studies are solved by the proposed method and the results are compared with ones by the sum of SN ratios, the expected weighted loss, the desirability function, and EXTOPSIS model.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 1997.10a
• /
• pp.193-200
• /
• 1997

Current seismic design code is based of the assumption that the designed structures would be behaved inelastically during a severe earthquake ground motion. For this reason, seismic design forces calculated by seismic codes are much lower than the forces generated by design earthquakes which makes structures responding elastically. Present procedures for calculating seismic design forces are based on the use of elastic spectra reduced by a strength reduction factors known as "response modificaion factor". Because these factors were determined empirically, it is difficult to know how much inelastic behaviors of the structures exhibit. In this study, base shear forces required to maintain target ductility ratio were first calculated from nonlinear dynamic analysis on the single degree of freedom system. And then, base shear foeces specified in seismic design code compare with above results. If the strength(base shear) required strength should be filled by overstrength and/or redundancy. Therefore, overstrength of moment resisting frame structure will be estimated from the results of static nonlinear analysis(push-over analysis).analysis).

• Journal of the HCI Society of Korea
• /
• v.1 no.1
• /
• pp.81-88
• /
• 2006

With the introduction of the digital technology in the exhibition environment, the information of the exhibit has come to be transmitted through diverse media. The visitors desire has been increased from the simple viewing of the exhibition to the active participation in the exhibition viewing and the utilization of the exhibit information. Subsequently, the study on the service to effectively support the viewing experience and provide the information by utilizing the internet and mobile device for visitors in movement has become important in terms of the exhibition environment. Accordingly, in this study, the current condition in studying the service supporting the exhibition environment and the exhibition viewing, which are being changed into a digital network environment, was examined through the literature and case studies. In order to find out the viewing situation and viewing type of visitors, the visitors behaviors of viewing the exhibition were observed. By analyzing the contents observed, the viewing type and keyword were drawn in accordance with the visitors behaviors of viewing. On the basis of this, visitors needs and problems occurring in case of the exhibition viewing were found out via in-depth interview. The service factors of supporting the exhibition viewing were proposed on the basis of the factors by which visitors needs and problems could be solved via interface in the circumstance when visitors would move round the exhibition hall and view the exhibition. In terms of the service factors, the method to resolve was presented on the basis of the relationship between the exhibit and the space in case of selecting and viewing the exhibit. This was applied into the mobile PDA with the example of the exhibition environment in the national museum. Through the scenario of using, the usefulness of the service proposed and the relevant possibility of utilization were reviewed.

• Research in Mathematical Education
• /
• v.9 no.3 s.23
• /
• pp.285-294
• /
• 2005

The author has been teaching with an instructional module consisting of many mathematical concepts, based on designs formed by personal names or words to arouse students' interesting in learning mathematics. This module has been growing since it was first used as a supplementary lesson for calculus students. Now it consists of concepts that connect with mathematical topics such as number sense, algebraic thinking, geometry, and statistical reasoning, as well as other subjects such as art and quilt design. With its content we can provide our students the basic mathematical knowledge needed for further study in their own fields. In this article, we will demonstrate the latest development of this instructional module, which makes connections between mathematical knowledge and the design of personal quilt patterns. We will exhibit a 'Quilt of Nations' which consists of the designed quilt blocks of different countries, such as USA, Japan, Taiwan, Korea and others, as well as a quilt design using the abbreviation of this seminar. Then we will talk about how the connections are built, and how to design these mathematically rich, uniquely created, beautifully designed, and personalized quilt block patterns.

• Journal of the military operations research society of Korea
• /
• v.25 no.2
• /
• pp.62-72
• /
• 1999

Taguchi´s parameter design is to determine the optimal settings of design parameters of a product or a process such that the characteristics of a product exhibit small variabilities around their targer values. His analysis of the problem has focused only on a single characteristic or response. However the quality of most products is seldom defined by a characteristic, and is rather the composite of a great number of characteristics which are often interrelated and nearly always measured in a variety of units. The critical problem in dealing with multiple characteristics is how to compromise the conflict among the selected levels of the design parameters for each individual characteristic. In this paper, Methodology using SN ratio optimized by unvariate technique is proposed and a parameter design procedure to achieve the optimal compromise among several different response variables is developed. One existing case study is solved by the proposed method and the results are compared with ones by the sum of SN ratios, the expected weighted loss, the desirability functions, and EXTOPSIS model.

• Proceedings of the KIEE Conference
• /
• 1999.07a
• /
• pp.424-426
• /
• 1999

In this paper, the design characteristics, the manufacturing process and the results of performance test on the AC traction motor for urban transit standard E.M.U which is newly developed with applying standardization specification will be introduced. It is reviewed that the design and performance analysis on conventional motors considering system correlation and design constraint and the design optimization through an analysis of electro-magnetic, thermal and dynamic properties. The properties of factory products manufactured by 200 Class VPI process exhibit a excellent performance with a lower noise and vibration, higher efficiency and power factor etc.