• 한국비블리아학회지
• /
• 제16권2호
• /
• pp.61-82
• /
• 2005

기록 생산에 책임이 있는 개인, 가문, 단체 등에 대한 정보를 기술하는 것은 맥락정보를 제공하는데 있어서 필수적이다. 기록물 생산자 전거제어를 통한 맥락정보의 구축을 기록물 내용표준인 ISAAR(CPF) 2판과 구조표준인 EAC(Encoded Archival Contort)를 중심으로 살펴본다. 또한 도서관, 아카이브, 박물관 등 상이한 정보서비스 기관별로 구축된 맥락정보를 서로 공유하고 교환하기 위한 모델을 EAC를 적용하여 제시한 유럽의 LEAF Project를 소개한다. 끝으로 전거파일 구축 및 교환에 있어서의 한계를 짚어보고 국가적 차원에서 맥락정보 구축을 위해 수행해야 할 과제가 무엇인지 제시한다.

• 한국토양비료학회지
• /
• 제42권Spc호
• /
• pp.45-46
• /
• 2009

간척지 토양은 도시화와 산업화로 인해 잠식되는 농경지를 대체하는 식량공급원으로 간척지는 쌀 산업 외에 원예, 축산 등 다양한 생물산업 기반으로 활용되고 있다. 그리고 간척지 논농업(간척지 논 307만 ha)은 온실가스 저감 기능을 가지고 있으며 년간 논 1ha당 이산화탄소 흡수량 21.9t, 산소 공급량 15.9t으로 알려져 있다. 그러나 높은 염농도와 지하수위, 지하수 상승에 의한 재염화 현상, 토양 물리화학성과 배수 불량, 논의 경우 적정 유효토심은 50cm 정도이나 간척지 논 유효토심 20cm 이하로 유효토심이 매우 낮은 편이다. 또한 간척년대 경과할수록 제염은 되나 토양물리성 불량, 시비량 과다와 양분 불균형 발생으로 인하여 수분과 양분보유능 향상 토양관리 기술 개발 필요하다.

• 비파괴검사학회지
• /
• 제6권2호
• /
• pp.7-16
• /
• 1987

Eddy Current Examination is expected as the effective technique for nondestructive inspection of steam generator and various kinds of heat exchanging tubes made of STS - 304. In Case of E. C. T, a study on the various factors which have an effect on coil impedance is very important to the sensitivity of defect detection and the ratio of signal to noise. Therefore, this study analyzed coil impedance by means of the variational principle, the minimized theory of energy functional and the application of Finite Element Method. Really by using E. C. T, the relationship between the size of defects and the intensity of Eddy Current Signals can be obtained. Signal intensity becomes maximum at certain frequency. This frequency is affected by the characteristics and the position of signal sources.

• 전기전자학회논문지
• /
• 제18권1호
• /
• pp.146-151
• /
• 2014

스마트 그리드는 기존 전력망에 ICT(Information Communication Technology)기술과 타산업간의 지속적인 융합으로 다양한 부가서비스를 제공한다. 다양한 프로토콜을 사용하고 있는 스마트 그리드 응용시스템이 상호간에 독립적으로 정보를 교환하기 위해서는 기존 프로토콜에 독립적인 미들웨어 사용이 필요하다. 스마트 그리드 응용시스템들은 대부분 All-IP 기반에서 정보 교환이 이루어진다. 현재 All-IP 기반의 미들웨어는 대표적으로 SOAP(Simple Object Access Protocol)과 RESTful(REpresentational State Transfer ful)이 있다. 본 논문에서는 SOAP과 RESTful의 성능을 비교 분석하여 향후 스마트 그리드 응용 시스템 구축 시 사용할 수 있는 SOAP와 RESTful의 성능을 비교분석하였다.

• 한국군사과학기술학회지
• /
• 제11권1호
• /
• pp.51-56
• /
• 2008

The counter-fire operation system performs its mission exchanging information with other related systems such as command & control systems and military information systems. In the process of exchanging information, the counter-fire operation system uses a type of data message which contains exchange data information in the format of KMTF. The requirement of data exchange of count-fire operation will continue to evolve. But the EDX(External Data eXchange) configuration item of the current counter-fire operation system can not effectively cope with the variation of data exchange requirements due to its fixed software structure. In the paper, a solution for improving flexibility of external data exchange in counter-fire operation system is proposed.

• 대한기계학회논문집B
• /
• 제31권4호
• /
• pp.330-334
• /
• 2007

The objective of this study was to investigate the effecs of fouling mitigation for ceramic ball in cooling water system experimentally. The devices filled with ceramic balls were connected to the bypass line of the heat exchanging system. Cooling water in the heat exchanging system was artificial water. To visualize the formation of fouling on the heat transfer surface a number of images were obtained using a CCD camera with real-time microscopy. Fouling resistances and overall heat transfer coefficients were measured in order to analyze fouling mitigation effects. We found that the ceramic ball devices for artificial water reduced the formation of fouling compared to the no-mitigation devices.

• 한국CDE학회논문집
• /
• 제9권1호
• /
• pp.11-18
• /
• 2004

CAD systems have been developed with network technology and it is needed to exchange product data among them. STEP becomes world-wide international standard to exchange CAD data among various heterogeneous CAD systems in manufacturing industrial fields. We report results to test errors that can happen when exchanging STEP files of product model through the STEP translator of different commercial CAD systems. Also the tests of Korean Character, Hangul, have been carried out. And also we report the STEP rallies held twice in Korea and several rounds abroad, and their testing results are shown as tables and graphs. The tested results can be used for exchanging product models to the next domestic STEP Rally and extended to Northeastem Asian STEP rally by steadily contacting with the organizations for Asian STEP centers such as JSTEP(Japan) and CSTEP(China). Finally we expect that the result can be used to specify STEP standardization in the field of managing product data.

• 한국정밀공학회지
• /
• 제23권2호
• /
• pp.172-180
• /
• 2006

Although there existed many types of manual/power hybrid wheelchairs, their use was not widespread because of their inconvenience in converting drive system and in folding frames. To carry a wheelchair in the car or to convert driving methods, some hard work of disassembling or exchanging wheels was required for most of currently available hybrid wheelchairs. In this study, the standard foldable manual wheelchair was reformed to a power wheelchair by installing the newly developed Axial Flux Permanent Magnet(AFPM) type of brush less direct current(BLDC) motor on each rear hub of wheelchair. This wheelchair could be driven by manual or electric power without exchanging. wheels, thus no additional work was needed for carriage or for power conversion. The developed wheelchair was evaluated for durability, stability, maneuverability, cost, and reliability in accordance with the Korean standards. The results indicated that the developed hybrid wheelchair was good enough for commercialization comparing to other imported wheelchairs.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.1015-1018
• /
• 2002

Recently, many studies have been undergoing to reduce a working time in a field of machine tool. There are two ways of reducing a working time; to reduce an actual working time by heighten a speed of spindle and to reduce a stand-by time by shortening a tool exchanging time. ATC(Automatic Tool changer) belongs to the latter case. Fixed address type ATC that is being developed ill this study can store more number of tool in small space than magazine transfer type ATC relatively as well as shorten tool exchanging time. In this study, a simplified equivalent model of finite element method in order to analyze structure of fixed address type ATC.

• 경영과정보연구
• /
• 제21권
• /
• pp.99-114
• /
• 2007

According as Internet based EC(Electronic Commerce) has been activated, More requirements for exchanging digital documents are being proposed in B2B(Business to Business) and B2G(Business to Government) environments. However, the documents can not be processed automatically, because the structures of documents in each site(companies, central/local governments) do not match. Therefore, W3C(World Wide Web Consortium) has proposed XML(eXtensible Markup Language) DTD(Document Type Declaration) technology to support structuring documents. The XML DTD technology can support interoperability between EC sites. And, XML DTD based documents can be processed automatically in every sites. They will improve efficiency of services in B2B and B2G environments. In this paper, we propose interoperable DTD architecture and IDEP(Interoperable DTD Exchange Protocol) protocol which supports searching DTDs and exchanging DTDs. This technology can popularize DTDs and digital documents.