• Clinical and Experimental Pediatrics
• /
• v.48 no.3
• /
• pp.327-332
• /
• 2005

Interstitial lung disease refers to a group of pulmonary disorders characterized by inflammation of the interstitium, derangements and loss of alveolar capillary units leading to disruption of alveolar gas exchange, which induces symptoms of restrictive lung disease. Cases of interstitial pneumonia in children are uncommon and mostly have unknown causes. We have experienced an 8-year old boy who had symptoms of cyanosis, dry cough, dyspnea and abrupt weight loss. He had not been exposed to organic dusts, allergens or any other systemic disease infections. Chest radiology showed diffuse ground glass opacity in both lung fields. High resolution computed tomography(HRCT) showed multiple small patchy areas of consolidation with an underlying ground glass appearance in both lungs. The pathologic findings of lung biopsy tissue showed patchy areas of interstitial fibrosis, alveolar obliteration and nodular fibrotic areas, strongly suggesting interstitial pneumonia. No specific finding of viral inclusion or any other evidence of infection was found under electromicroscopy. We used peak flow meters to compare functional improvement. Forced expiratory volume in one second ($FEV_1$) was decreased to 25 percent of predicted value. The boy was given treatment with prednisone and showed improvements in HRCT findings after two months. He was able to tolerate easy exercise in school and showed clinical improvements after one year of follow up.

• The Korean Journal of Nuclear Medicine
• /
• v.7 no.2
• /
• pp.1-12
• /
• 1973

The most commonly used methods for determining thyroxine binding globulin(TBG) concentration as the total thyroxine-binding capacity utilize electrophoretic seperation of serum. Although technically simple, the electrophoretic method is time consuming and is limited in the number of samples which can be run in a single assay. The author presented a single $T_4$ load ion exchange resin method as an approach to simplify the technique as with clinical practicability and results were analyzed. For construction of the standard curves, serum mixtures were diluted with barbital buffer.which effectively blocked $T_4$-binding to TBPA. For each serum dilution, a constant amount of $T_4-^{125}I$ and increments of unlabelled $T_4$ were added. After incubation in water bath, resin beads were dispensed to the samples which binded all $T_4$ not bound to TBG. The radioactivity in the supernatant was counted in the gamma scintillation counter. Each standard curve was plotted from the percent counts in the supernatant and total $T_4$ in each tube. Unknown samples were diluted to 1:40 and ran at a single $T_4$ loading concentration, and the TBG capacity of the samples was able to be read on the standard isobars. The following results were obtained. 1) Mean and standard deviation for TBG capacity in normal population was $28.6{\pm}5.09{\mu}g\;T_4/100ml$. 2) $24.9{\pm}3.87{\mu}g\;T_4/100ml$ in hyperthyroidism showed low TBG capacity comparing to normal population.(p<0.025) 3) $31.0{\pm}2.40{\mu}g\;T_4/100ml$ in hypothyroidism showed high TBG capacity tendency comparing to normal population. 4) Reversed correlationship existed between TBG capacity and $T_3$ resin uptake(r=-0.624), TBG capacity and serum $T_4$ value (r=-0.859), and TBG capacity and free thyroxine index(r=-0.623). The author assumes that this method of assay is considerably simpler in instrumentation and technique than any other assays traditionally being used, and seems to be more practical for routine clinical laboratory use.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.189-189
• /
• 2012

Lead sulfide (PbS) nanocrystal quantum dots (NQDs) are promising materials for various optoelectronic devices, especially solar cells, because of their tunability of the optical band-gap controlled by adjusting the diameter of NQDs. PbS is a IV-VI semiconductor enabling infrared-absorption and it can be synthesized using solution process methods. A wide choice of the diameter of PbS NQDs is also a benefit to achieve the quantum confinement regime due to its large Bohr exciton radius (20 nm). To exploit these desirable properties, many research groups have intensively studied to apply for the photovoltaic devices. There are several essential requirements to fabricate the efficient NQDs-based solar cell. First of all, highly confined PbS QDs should be synthesized resulting in a narrow peak with a small full width-half maximum value at the first exciton transition observed in UV-Vis absorbance and photoluminescence spectra. In other words, the size-uniformity of NQDs ought to secure under 5%. Second, PbS NQDs should be assembled carefully in order to enhance the electronic coupling between adjacent NQDs by controlling the inter-QDs distance. Finally, appropriate structure for the photovoltaic device is the key issue to extract the photo-generated carriers from light-absorbing layer in solar cell. In this step, workfunction and Fermi energy difference could be precisely considered for Schottky and hetero junction device, respectively. In this presentation, we introduce the strategy to obtain high performance solar cell fabricated using PbS NQDs below the size of the Bohr radius. The PbS NQDs with various diameters were synthesized using methods established by Hines with a few modifications. PbS NQDs solids were assembled using layer-by-layer spin-coating method. Subsequent ligand-exchange was carried out using 1,2-ethanedithiol (EDT) to reduce inter-NQDs distance. Finally, Schottky junction solar cells were fabricated on ITO-coated glass and 150 nm-thick Al was deposited on the top of PbS NQDs solids as a top electrode using thermal evaporation technique. To evaluate the solar cell performance, current-voltage (I-V) measurement were performed under AM 1.5G solar spectrum at 1 sun intensity. As a result, we could achieve the power conversion efficiency of 3.33% at Schottky junction solar cell. This result indicates that high performance solar cell is successfully fabricated by optimizing the all steps as mentioned above in this work.

• Asian-Australasian Journal of Animal Sciences
• /
• v.31 no.6
• /
• pp.851-858
• /
• 2018

Objective: This study was conducted to compare different methods on effective energy evaluation of corn silage for beef cattle. Methods: Twenty Wandong bulls (Chinese indigenous yellow cattle) with initial body weight of $281{\pm}15.6kg$, were assigned to 1 of 5 dietary treatments with 4 animals per treatment in a randomized complete block design. Five dietary treatments included group 1 with corn silage only diet, group 2 with corn silage-concentrate basal diet (BD) and 3 groups with 3 test diets, which were the BD partly substituted by corn silage at 10%, 30%, and 60%. The total collection digestion trial was conducted for 5 d for each block after a 10-d adaptation period, and then an open-circuit respiratory cage was used to measure the gas exchange of each animal in a consecutive 4-d period. Results: The direct method-derived metabolizable energy and net energy of corn silage were 8.86 and 5.15 MJ/kg dry matter (DM), expressed as net energy requirement for maintenance and gain were 5.28 and 2.90 MJ/kg DM, respectively; the corresponding regression method-derived estimates were 8.96, 5.34, 5.37, and 2.98 MJ/kg DM, respectively. The direct method-derived estimates were not different (p>0.05) from those obtained using the regression method. Using substitution method, the nutrient apparent digestibility and effective energy values of corn silage varied with the increased corn silage substitution ratio (p<0.05). In addition, the corn silage estimates at the substitution ratio of 30% were similar to those estimated by direct and regression methods. Conclusion: In determining the energy value of corn silage using substitution method, there was a discrepancy between different substitution ratios, and the substitution ratio of 30% was more appropriate than 10% or 60% in the current study. The regression method based on multiple point substitution was more appropriate than single point substitution on energy evaluation of feedstuffs for beef cattle.

• Journal of Korean Society of Transportation
• /
• v.20 no.1
• /
• pp.39-52
• /
• 2002

Traffic data by vehicle classification is difficult for mutual exchange of data due to the different vehicle classification from each other by the data sources; as a result, application of the data is very limited. In Particular. in case of TCS vehicle classification in national highways, passenger car, van and truck are mixed in one category and the practical usage is very low. The research standardize the vehicle classification to convert other data and develop the model which can estimate national highway traffic data by the standardized vehicle classification from the raw traffic data obtained at the highway tollgates. The tollgates are categorized into several groups by their features and the model estimates traffic data by the standardized vehicle classification by using the point estimation and bootstrap algorithm. The result indicates that both of the two methods above have the significant level. When considering the bias of the extreme value by the sample size, the bootstrap algorithm is more sophisticated. Using result of this study, we is expect the usage improvement of TCS data and more specific comparison between the freeway traffic investigation and link volume on freeway using the TCS data.

• The Journal of the Korea Contents Association
• /
• v.9 no.12
• /
• pp.173-180
• /
• 2009

Increased appetite for art and design due to improving the economic standard of living and industrial community recognized the value of art in the profitable aspect currently demands various exhibitions in various environments. These social needs and changes in corporate culture to meet the rapidly expanding opportunities for artistic exhibitions, and this modern exhibition outside of the conventional gallery requires more for designers to work with various exhibition spaces, and the opportunities are increasing further. Various types of exhibition space in the exhibition planning an unspecified environment best suited to each exhibit space has been designed to require. This comprehensive study of an environmental poster exhibition held in the Seoul Institute of the Arts, MA-block lobby during 2009.06.10-06.19 was a part of the international exchange projects between Seoul Institute of the Arts and California State University, Northridge. Planning and designing throughout the exhibition in an unspecified space for exhibition requires more creativity and flexible approaches than in the general exhibition gallery.

• Microbiology and Biotechnology Letters
• /
• v.26 no.6
• /
• pp.515-522
• /
• 1998

Plant root rotting fungi, Fusarium solani are suppressed their growth by the chitinase which is produced from the antagonistic soil bacteria. The chitinase producable antagonistic bacterium Pseudomonas sp. 3098 was selected as a powerful biocontrol agent of F. solani from ginseng rhizosphere. The antagonistic Pseudomonas sp. 3098 was able to produce a large amount of extracellular chitinase which is key enzyme in the decomposition of fusarial hypal walls. The chitinase was purified from cultural filtrate of Pseudomonas sp. 3098 by the procedure of ammonium sulfate precipitation, anion exchange chromatography, gel filtration on Bio-Gel P-100, and 1st and 2nd hydroxyapatite chromatography. The molecular mass of the purified enzyme was ca. 45 kDa on SDS-FAGE. The optimal pH and temperature for the activity of purified chitinase were 5.0 and 45$^{\circ}C$, respectively. The enzyme was stable in pH range of 5.0 to 9.0 up to 5$0^{\circ}C$ The enzyme was significantly inhibited by metal compounds such as FeCl$_2$, AgNO$_3$ and HgCl$_2$, and was slightly inhibited by p-CMB, iodoacetic acid, urea, 2,4-DNP and EDTA. The enzyme had ability of digestion on colloidal chitin and chitin from shrimp shell, but could not digest chitosan and chitin from crab shell. Km value of the enzyme was 0.11% on colloidal chitin, and the maximum hydrolysis rate of the enzyme was 34% on colloidal chitin.

• Journal of the Korean GEO-environmental Society
• /
• v.11 no.1
• /
• pp.19-26
• /
• 2010

The batch experiments and response surface methodology (RSM) have been applied to the investigation of the cadmium (Cd) adsorption by coal fly ash (CFA). CFA having maximum Cd removal mass of 8.51 mg/g were calculated from Langmuir model. Cd removal reaction with different initial pH ranged from 4 to 9. When the initial pH was higher, Cd was removed more by adsorption and precipitation. These results suggest that the lower pH cause an increase of $H^+$ ion concentration which competed with Cd ions for exchange sites in CFA. Also, The Cd adsorption was mathematically described as a function of parameters initial Cd concentration ($X_1$), initial pH ($X_2$), and initial CFA mass ($X_3$) being modeled by use of the Box-Behnken methods. Empirical models were developed to describe relationship between the experimental variables and response. Statistical analysis indicates that tree factors ($X_1$, $X_2$, and $X_3$) on the linear term (main effects), and tree factors ($X_1X_2$, $X_1X_3$, and $X_2X_3$) on the non-linear term (Interaction effect; cross-product) had significant effects, respectively. In this case, the value of the adjusted determination coefficient (adjusted $R^2=0.9280$) was closed to 1, showing a high significance of the model. Statistical results showed the order of Cd removal at experimental factors to be initial initial pH > initial Cd concentration > initial CFA mass.

• The Korean Journal of Financial Management
• /
• v.25 no.2
• /
• pp.191-213
• /
• 2008

This study tests and reconfirms the wealth transfer of mergers and acquisitions(M&As) by examining the changes in and the relationship between shareholder and bondholder wealth after the announcements of M&As for the publicly listed firms in Korea Stock Exchange and KOSDAQ market during $1999{\sim}2006$. The change in shareholder wealth is measured by the Cumulative Abnormal Return(CAR) at the M&A announcements, and the change in bondholder wealth is calculated using the Yield Spread Change(YSC) and the change in acquiring firms' credit ratings. The empirical tests show that the CAR of 344 sample acquiring firms at the announcement is 3.59%, which confirms results of the prior research on M&As in Korean market. The average YSC for 35 sample acquiring firms between $2001{\sim}2006$ proves to be negative when we use the yield spread of firms with comparable credit ratings as a benchmark, which means that the acquiring firms' bondholders gain with the announcements of M&As. We find the same result using another benchmark-the yield spread of government bonds. The improvement in the acquiring firms' credit ratings one year after the M&As also indicates that the M&As, on average, increase bondholder wealth. Our test results are consistent with those of the existing studies on the effect of bondholder wealth after the M&As in the United States, which shows that the bondholder wealth increases after the M&As. We do not find the evidence that there is a wealth transfer from the acquiring firms' bondholders to the shareholders after the M&A announcements. Rather, this study confirms that the wealth of the acquiring firms' bondholders increases in the M&As in Korea.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.22 no.4
• /
• pp.347-353
• /
• 2002

A structure of a glass electrode-type pH sensor for measuring any concentration of $H^+$ in an aqueous solution was embodied with bulk micromachining technology. Two open well structures were formed, and a reference electrode was secured by the Ag/AgCl thin film in the sloped side of the etched structure. A sensitive membrane of an indicator electrode for generating a potential by an exchange reaction to $H^+$ was made with a glass containing Na 20% or more finely so that its thickness might be $100{\mu}m$ or so, and then it was bonded to one pyramidal structure. A liquid junction for a current path was formed by filling an agar in the anisotropically etched part of the Si wafer, which had a size of $50{\mu}m{\times}50{\mu}m$, and then bonded it to the other. After complete fabrication of each part, it was filled with a 2M KCl reference solution and encapsulated the sensor structure with a cold expoxy. The potential value of fabricated pH sensor was about 90mV/pH in the standard pH solutions.