• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2008년도 제33회 펄프종이기술 국제세미나
• /
• pp.47-70
• /
• 2008

Cost efficiency is today the primary requirement in the paper and board industry. This has led therefore, to a greater preponderance of products with specifically designed functionality to take account of current industry needs. Continually increasing machine coating speeds together with these new coating colour components have put more emphasis on the importance of the correct rheology and water retention of the coating colours to achieve good runnability and end product quality. In the coating process, some penetration of the aqueous phase, to the base paper or board must occur to anchor the pre-coating to the base or the topcoat to the pre-coat. The aqueous phase acts as a vehicle not only for the binder, but also for the other components. If this water or material penetration is not controlled, there will be excessive material shift from the coating colour to the base, before immobilization of the coating colour will stop this migration. This can result in poor machine runnability, unstable system and uneven coating layer, impacting print quality. The performance of rheology modifiers or thickeners on the coating color have tended to be evaluated by the term, "water retention". This simple term is not sufficient to explain their performance changes during coating. In this paper we are introducing a new concept of "material retention", which takes note of the total composition of the coating colour material and therefore goes beyond the concept of only water retention. Controlled material retention leads to a more uniform z-directional distribution of coating colour components. The changes that can be made to z-directional uniformity will have positive effects on print quality as measured by surface strength, ink setting properties, print gloss, mottling tendency. Optical properties, such as light scattering, whiteness and light fastness delivery should also be improved. Additionally, controlled material retention minimizes changes to the coating colour with time in re-circulation giving less fluctuation in quality in the machine direction since it more closely resembles fresh coating for longer periods. Use of the material retention concept enables paper and board producers to have more stable runnability (i.e. lower process costs), improved end product quality (i.e. better performance of used chemicals) and/or optimized use of coating colour components (i.e. lower total formulation cost)

• 대한한의학회지
• /
• 제16권1호통권29호
• /
• pp.141-159
• /
• 1995

The causes and treatment of alopecia are concluded based on the records found successive oriental medicine in order to persuade new treatments for alopecia as following : 1. In the context of modern medical science male-dominated alopecia was referred as dok-rak(禿落), cho-dok(早禿), chon-dok(全禿), pal-ju-tal-bal, chu-bal-sun and pal-sun(髮癬) alternatively, while alopecia areata was refereed as yu-pung(油風), pan-dok(斑禿), kwi-ji-du and kwi-che-du(鬼剃頭). 2. The causes of alopecia is related with condition of Gi(vital energy) and Hyul(blood) in the twelve channels, such as weakening of vital energy in the conduits, condition of internal organs as heat in the lung, weak kidney or liver vitality, and eating habits such as severe ingestion of bitter taste or sweet taste food. Other distinct reasons are penetration of wind and dryness into a head due to weakening Gi and Hyul inside human body, flaring up of the asthenic fire due to excessive eatings, hard labour or psychological sufferings deficiency of blood, deficiency of vital essence of kidney, phlegm caused by dampness and heat, and stagnated blood. 3. According to demonstration of alopecia, the causes of alopecia areata are listed as internal wind due to heat of blood, deficiency of liver and kidney, blookage of channels and collaterals by stagnated blood, and causes of male-dominated alopecia are listed as wind dryness caused by heat of blood, dampness and heat, and heat, wind and dryness due to deficiency of blood.

• 전기학회논문지
• /
• 제66권9호
• /
• pp.1309-1316
• /
• 2017

As penetration level of Distributed Generations (DGs) on weak distribution networks gets higher, voltage rise problem can often occur due to reverse power which is not expected in conventional distribution networks. It, however, cannot be effectively solved by using conventional voltage regulating devices such as On-Load Tap Changers (OLTCs), Step Voltage Regulators (SVRs) because those do not consider the presence of DGs when determining relevant setting parameter for voltage regulation. This paper presents a scheme for voltage regulation using coordinated control between OLTC and DGs which can actively participate in the regulation. The scheme decides which device should be operated first based on the characteristics of regulating devices, in order to prevent unnecessary operation of output changes of DG and excessive tap changing operation of OLTC. Computer simulations considering daily irradiation of PV and load curve are performed by using MATLAB Simulink and performance comparison between the presented scheme and conventional ones is also made. It can be concluded from simulation results that the scheme presented is very effective to regulate voltages in distribution networks with multiple DGs.

• 동의생리병리학회지
• /
• 제27권2호
• /
• pp.212-224
• /
• 2013

This study intends to clarify how Sayeok-tang(here in after reffered to SYT) affect C57BL/10 mice whose osteoarthritis was induced by papain. Osteoarthritis was induced by injecting papain in the knee joint of 3 groups(n=6) of mice. Normal group was non-treatment group and was not injected papain, whereas control mice were orally administered with $200{\mu}{\ell}$ of physiological saline. Positive comparison group was medicated with 100 mg/kg of Joins$^{(R)}$ mixed with $200{\mu}{\ell}$ of physiological saline. Experimental group was medicated with 400 mg/kg of SYT mixed with $200{\mu}{\ell}$ of physiological saline. Both Positive and experimental comparison groups were orally medicated once per day for 4 weeks. After the experiment, the functions of liver and kidney, inflammation cytokine values within serum, degree of revelation for inflammation cytokine genes, immune cells within blood, metabolism of arachidonic acid and amount of cartilage were measured and histopathological changes in the knee joint structures were observed. As results, SYT had no significant effect on the liver and kidney functions. Interleukin-$1{\beta}$(IL-$1{\beta}$), interleukin-6(IL-6), monocyte chemo attractant protein-1(MCP-1) and tumor necrosis factor-${\alpha}$(TNF-${\alpha}$) were significantly decreased. Inflammation cytokines in joints were all significantly decreased. Prostaglandin $E_2(PGE_2)$, thromboxane $B_2(TXB_2)$ were significantly decreased. Destruction of cartilage on micro computed tomography(CT)-arthrography was meaningfully decreased. In terms of histopathology, infiltration of inflammation, proliferation of synovial membrane, subsidence of cartilage and bone due to penetration of excessive formation of synovial cell and destruction of cartilage were small. Based on all results mentioned above, Sayeok-tang(SYT) is believed to be meaningful for suppressing the progress of osteoarthritis and its treatments because of its anti-inflammatory effects and alleviation of pain with histopathological effective efficacy.

• 한국환경과학회지
• /
• 제22권9호
• /
• pp.1187-1197
• /
• 2013

The result of a small electrostatic precipitator which is in order to decrease indoor air pollution for optimal efficiency was shown as follows. Although the closer distance between the discharge electrode and dust collecting electrode shows the better throughput efficiency by forming strong electrostatic Field, it does not have profound impact in case of optimal dust collecting area. G.P(gas passage) which is the distance from dust collecting electrode to dust collecting electrode is a crucial factor to decide dust collecting efficiency. The narrower distance of G.P shows the better throughput efficiency whereas it decreases when the distance is too narrow since sparks ensue by increasing the capacity of electrostatic charging system 5 mm regards as optimal efficiency in this experiment. Although the higher voltage shows the higher dust collecting efficiency overall, the experiment was not able to keep performing since the sparks which decrease dust collecting efficiency ensue over 40 kV. The efficient and safe voltage state is considered 3.6 kV in this experiment. The most crucial factor for dust collecting efficiency of an electrostatic precipitator which is in order to decrease indoor air pollution is applied voltage. In addition, optimal raw gas flow rate(2.4 m/sec) is more important factor than the excessive increase of dust collecting area.

• 공업화학
• /
• 제28권2호
• /
• pp.177-185
• /
• 2017

본 연구에서는 스테아르산(SA), 올레산(OA), 리놀레산(LA) 등의 지방산이 지질 소포체 막과의 상호 작용에 미치는 영향에 관하여 살펴보았다. 이를 위하여 지방산 종류 및 농도 변화에 따른 리포좀 평균 입자 크기 및 제타 전위, 리포좀 막의 deformability, fluorescence anisotropy ratio 등을 측정하고 TEM 관찰을 통하여 지방산 첨가가 리포좀 막의 유동성 변화에 미치는 역할에 관하여 살펴보았다. 기본적으로 SA, OA, LA 등의 지방산 첨가는 동일한 경향을 나타내었다. 즉, 지방산을 첨가함에 따라 리포좀이 보다 치밀한 패킹을 갖게 되어서 리포좀의 크기는 감소하고 제타 전위 값은 증가하였으나, 지방산의 과도한 첨가는 리포좀에서 다형(polymorphic) 구조를 가지는 지질 입자 응집체로의 전이를 일으켰다. SA, OA 및 LA 지방산 시스템에서의 최소 리포좀 크기와 가장 치밀한 리포좀 패킹은 레시틴 대비 지방산의 몰 비율이 각각 0.70, 0.50, 0.25인 조건에서 관찰되었으며, 리포좀 막의 deformability와 fluorescence anisotropy ratio 측정에 의한 리포좀 막의 유동성 측정 결과는 TEM 및 입자 크기 측정 결과와 일치함을 알 수 있었다.

• 한국식품과학회지
• /
• 제31권1호
• /
• pp.54-61
• /
• 1999

본 연구는 해동 중 발생하는 drip 손실, 미생물의 오염, 표면의 과열 등을 방지하면서 급속 해동 방법을 찾기 위해 동결 돈육에 여러 가지 해동 방법을 적용하였다. 4, 28, $50^{\circ}C$에서의 해동과 2,450, 915 MHz의 microwave를 이용하여 해동을 실시하였고, 915 MHz microwave 해동은 출력을 5, 10, 15 kW로 변화시키면서 단일 조사와 $120^{\circ}C$의 열풍을 함께 조사한 경우를 해동시간, 온도분포, drip 손실, 보수력, 표면색도, 총세균수를 측정하였다. 915 MHz microwave를 이용한 해동은 열전도에 의한 해동보다 2백배 이상 시간이 단축되었고, 2,450 MHz microwave를 이용한 해동 방법의 침투깊이의 제한에서 발생되는 문제를 개선시킬 수 있었으며 drip 손실, 보수력, 총세균수에 있어서 효과가 컸다. 저주파수(915 MHz), 저출력(5 kW)의 microwave와 대류 가열을 병용하여 품질 저하를 최소한으로 방지하면서 급속해동을 위한 산업적 이용이 가능한 것으로 기대할 수 있었다.

• Korean Journal of Acupuncture
• /
• 제27권2호
• /
• pp.35-47
• /
• 2010

Objectives : Chim-Gu-Kyung-Heom-Bang(CGKHB; 鍼灸經驗方) is the needle and moxa specialized document written by the doctor specialized in needle and moxa treatment of Joseon(朝鮮), Heo Im(1570-1647). The document was published in April 1644(22nd year of King Injo). CGKHB contains the needle and moxa treatment techniques accumulated by the Joseon Dynasty as well as the personal experience of Heo Im. The aim of this study is to restore the past treatment method as a method of Needle Insertion Method at CV12(NIM-CV12, needle to penetrate blood vessel technique) in CGKHB.. Methods : Through Dong-Yi-Bao-Gam(DYBG; 東醫寶鑑), the implication of Korean medicine study of the Jungwan(CV12) has been studied. Next is the contemplation of the NIM-CV12 of CGKHB with the Acupuncture Treatment Using Jungwan(中脘鍼法) of Park Tae-won and Acupuncture Treatment for Byeokjeok(癖積鍼法) of "Geup Yubang". Results and Conclusions : 1. CV12 is one of the acupuncture points representing stomach(脾胃), middle energizer(中焦), phlegm-fluid retention(痰飮) and greater yin(太陰). 2. NIM-CV12 of CGKHB is the technique to penetrate the needle into the CV12 strictly relying on tactile sense of a person who give the penetration. This CV12 administration was carried out at intervals of every 7 or 8 day. During the administration period, the patient was not allowed to intake excessive amount of food. 3. The Acupuncture Treatment Using Jungwan(中脘鍼法) of Park Tae-won and Acupuncture Treatment for Byeokjeok(癖積鍼法) of "GeupYubang", existed in the same era of the NIM-CV12 of CGKHB, have similar linkage to the NIM-CV12 of Heo Im.

• Corrosion Science and Technology
• /
• 제19권6호
• /
• pp.296-301
• /
• 2020

Failure analysis on the welded type 304 pipe used for cooling water piping in the district heating primary side was conducted. Inorganic elements and bacteria in the cooling water and in corrosion products were analyzed, and the weldment was inspected by microscopy and a sensitization test. Corrosion damages were observed in the heat-affected zone, on weld defects such as incomplete fusion or excessive penetration caused by improper welding, or/and at the 6 o'clock position along the pipe axial direction. However, the level of concentration of chloride in the cooling water as low as 80 ppm has been reported to be not enough for even a sensitized type 304 steel, meaning that the additional corrosive factor was required for these corrosion damages. The factor leading to these corrosion damages was drawn to be the metabolisms of the types of bacteria, which is proved by the detection of proton, sulfur containing species, biofilms, and both bacteria and corrosion product analyses.

• 한국터널지하공간학회 논문집
• /
• 제21권1호
• /
• pp.31-48
• /
• 2019

인공동결공법(artificial ground freezing method)은 연약지반 및 도심지에서의 지하구조물 시공에 적합한 차수 및 지반보강 공법이다. 인공동결공법은 동결관(freezing pipe)을 지중에 매설한 후 냉매(refregerant)를 순환시켜 대상 지반에 차수벽 및 지지체의 역할을 수행하는 동결벽체(frozen wall)를 형성한다. 그러나 간극수의 동결에 따른 간극수의 부피팽창은 지반의 변형을 야기시킬 수 있고, 시공완료 후 동결토의 융해에 따른 지반의 소성변형 및 입자의 재배치 등은 지반의 역학적 특성을 변화시킨다. 본 논문에서는 인공동결공법에 따른 해성 점토지반(marine clay)의 동결속도를 평가하기 위하여 인공동결공법 현장실증시험을 수행하였다. 현장실증시험은 지중에 3.2 m 깊이로 매설된 동결관 1공 내로 초저온 냉매인 액화질소를 순환시키는 방법으로 수행되었다. 또한, 원지반과 인공동결공법에 의해 동결/융해된 지반에 대한 피에조 콘 관입시험(piezo cone penetration test, CPTu) 및 공내재하시험(lateral load test, LLT)을 수행함으로써 동결/융해(freezing-thawing)에 따른 해성 점토지반의 강도 및 강성 특성의 변화를 평가하였다. 시험결과, 부피가 약 $2.12m^3$인 원기둥 모양의 동결체를 형성하는데 총 3.5일이 동안 약 11.9 ton의 액화질소가 소요되었다. 동결/융해에 따른 지반의 강도 및 강성 저하는 각각 48.5%, 22.7%로 산정되었다.