• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2009년도 추계학술발표대회
• /
• pp.31.1-31.1
• /
• 2009

In an approach to acclimate ourselves torecent ecological consciousness trend, a lead-free piezoelectric material, bismuth sodium titanate (abbreviated as BNT) based bismuth sodium barium titanate (abbreviated as BNT-BT), was considered as an environment-friendly alternative for a lead based piezoelectric system. Ceramic specimens of0.94[(BixNa0.5)TiO3]-0.06[BaTiO3] (x = 0.500~0.515) compositions were prepared by a modified mixed oxide method. To increase the chemical homogeneity andre action activity, high energy mechanical milling machine and pre-milled nanosized powder has been used. In this method (BixNa0.5)TiO3 (x=0.500~0.515) andBaTiO3 were prepared separately from pre-milled constituent materials at low calcination temperature and then separately prepared BNTX (X=1, 2, 3 and 4) and BT were mixed by high energy mechanical milling machine. Without further calcination step the mixed powders were pressed into disk shape and sintered at $1110^{\circ}C$. Microstructures, phase structures and electrical properties of the ceramic specimens were systematically investigated. Highly dense ceramic specimens with homogenous grains were prepared in spite of relatively low sintering temperature. Phase structures were not significantly influenced by the excess amount Bi. Large variation on the piezoelectric and dielectric properties was detected at relative high excess Bi amounts. When $x{\leq}0.505$, the specimens exhibit insignificant variation in piezoelectric and dielectric constant though depolarization temperature is found to be decreased. Considerable amount of decrease in piezoelectric and dielectric properties are observed with higher excess of Bi amounts ($x{\geq}0.505$). This research indicates the advantages of high energy mechanical milling and importance of proper maintenance of Bi stoichiometry.

• 한국재료학회지
• /
• 제27권3호
• /
• pp.144-148
• /
• 2017

The effects of an excess of Bi on the piezoelectric and dielectric properties of $0.60Bi_{1+x}FeO_3-0.40BaTiO_3$ (x = 0, 0.01, 0.03, 0.05, 0.07) were investigated. The ceramics were processed through a conventional solid state reaction method and then quenched after sintering at different temperatures in the range of $980{\sim}1070^{\circ}C$. A single perovskite structure without any secondary phase was confirmed for all compositions and temperatures. It was found that excess Bi reduced the sintering temperatures, acted as a sintering aid and enhanced the properties in combination with quenching. Curie temperature ($T_C$) was found to slightly increase due to the presence of excess Bi; electrical properties were also improved by quenching. At x = 0.03 and $1030^{\circ}C$, remnant polarization ($2P_r$) was as high as $45.4{\mu}C/cm^2$ and strain at 40 kV/cm was up to 0.176 %.

• 전자공학회논문지T
• /
• 제36T권3호
• /
• pp.7-12
• /
• 1999

본 논문은 (1-x-y)PMN-yPT-xST세라믹스의 유전 및 변위특성을 ST의 양에 따라 조사하였다. ST의 성분은 1∼ 6㏖%이내로 변화시켰고 과잉 MgO에 따른 조성변화에 따라 결과를 조사하였다. ST의 성분의 증가에 따라 유전상수는 5㏖%인 조성에서 최대값을 나타내었다. 큐리온도는 ST의 성분이 증가함에 따라 선형적으로 감소하였다. 항전계와 잔류분극은 l㏖%인 조성에서 최대값을 나타내었다. 과잉 MgO의 효과에 따라 유전상수는 0.8PMN-0.12PT-0.04ST조성에서 MgO를 3㏖%까지 과잉 첨가함에 따라 증가하였으나 변위특성은 감소함을 나타내었다.

• 대한화학회지
• /
• 제54권1호
• /
• pp.71-76
• /
• 2010

298.15~318.15 K 온도에서 디지탈 진동 U-tube densimeter 와 Ubbelohde 모세관 점성계을 사용하여 2-브로모프로판/메탄올 이성분 혼합물의 밀도와 점성도를 측정하였다. 온도와 농도에 대한 밀도와 점성도 상호 의존 관계를 조사하였다. 이성분 혼합물의 여분 몰부피와 여분 점성도를 실험으로 얻어진 밀도와 점성돌로부터 계산하여 구하였다. 모델이 실험치와 잘부합됨을 발견하였다.

• 마이크로전자및패키징학회지
• /
• 제20권4호
• /
• pp.25-30
• /
• 2013

Pb-free ferroelectric $(Na_{0.5}Bi_{0.5})TiO_3$ (NBT) thin films were prepared by a modified sol-gel process. Their structural, dielectric and pyroelectric properties were investigated as a function of the excess Na/Bi ratio and the annealing temperature. In the case of thin films containing no excess Na and Bi, only partial amounts of the perovskite NBT were crystallized, where the films consisted mainly of the pyrochlore phase of $Bi_2Ti_2O_7$ for annealing conditions of $600{\sim}800^{\circ}C$. With increasing excess Na/Bi ratio, the proportion of the perovskite phase effectively increased due to the compensation of the volatile Na and Bi components. For a Na/Bi ratio of 2.0, the thin film with single NBT perovskite phase was obtained within XRD detection limit after annealing at $700^{\circ}C$ for 10 min and it showed the excellent dielectric properties, ${\varepsilon}r$ of ~550 and tan ${\delta}$ of 0.03. While these properties were degraded for Na/Bi ratio of 2.5 despite the existence of pure perovskite phase. The NBT thin film with Na/Bi ratio of 2.0 are also promising candidates for applications requiring pyroelectric devices because it was found to have pyroelectric coefficients of $1.3{\sim}7nC/cm^2K$ in the temperature range of $30{\sim}100^{\circ}C$.

• 한국전기전자재료학회논문지
• /
• 제27권6호
• /
• pp.372-376
• /
• 2014

We investigated the effect of excess CuO on the sintering behavior, ferroelectric, and piezoelectric properties of lead-free $Bi_{0.5}(Na_{0.82}K_{0.18})_{0.5}TiO_3$ (BNKT) ceramics. The addition of excess CuO was found to greatly contribute to the densification and grain growth, however, excess CuO over 3 mol% was precipitated at grain boundaries after sintering. BNKT with 1~2 mol% CuO in excess sintered at $975^{\circ}C$ showed piezoelectric properties comparable to those of unmodified BNKT sintered at $1,175^{\circ}C$. These results seem meaningful for its application to low cost multilayer actuators (MLAs) because low firing ceramics make it possible to apply less expensive base metals to the inner electrode of MLAs.

• 한국해양공학회지
• /
• 제24권5호
• /
• pp.39-47
• /
• 2010

In this paper, a total stress analysis method for gravity quay walls is suggested. The method can evaluate the displacement of the quay walls considering the effect of excess pore pressure developed in backfill soils. This method changes the stiffness of backfill soils according to the expected magnitude of the excess pore pressure. For practical application, evaluation methods are suggested for determining the excess pore pressure ratio developed in the backfill soils and the backfill stiffness that corresponds to the excess pore pressure ratio. This method is important in practical applications because the displacement of the quay walls can be evaluated by using only the basic input properties in the total stress analysis. The applicability of the suggested method was verified by comparing the results of the analysis with the results of 1-g shaking table tests. From the comparison, it was found that the calculated displacements from the suggested method showed good agreement with the measured displacements of the quay walls. It was also found that the excess pore pressure in backfill soils is a governing influence on the dynamic behavior of quay walls.

• 한국안전학회지
• /
• 제14권3호
• /
• pp.84-92
• /
• 1999

The effects of air velocity and excess air on combustion characteristics were studied in a fluidized bed combustor. The domestic low-grade anthracite coal with heating value of 2010 kcal/kg and the imported bituminous coal from Australia with heating value of 6520 kcal/kg were used as coal samples. The combustion characteristics of mixed fuels in a fluidized bed combustor could be interpreted by pressure fluctuation properties, ash distribution and gas emission. The properties of the pressure fluctuations, such as the standard deviation, cross-correlation function, dominant frequency and the power spectral density function, were obtained from the statistical analysis. From this study, the combustion region increased with increasing air velocity but decreased with excess air due to combustion characteristics of anthracite and bituminous coal.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1989년도 춘계학술대회 논문집
• /
• pp.105-106
• /
• 1989

The effects of pyrochlore phase and micostructure on the dielectric properties. such as dielectric constant, dissipation factor, diffusensess coefficient and dielectric hysteresis characteristics, of Lead magnesium niobate(PMN) ceramics have been studied as a function of the amount of excess MgO. The pyrochlore phase in PMN was completely eliminated with the addition of 5 m/o excess MgO. Also, the dielectric constant and remanent polarization increased with increase in grain size, density and then decreased with grain growth inhibitation for further addition of excess MgO. The diffuseness coefficient showed a tendency nearly reverse to that for the dielectric constant and remanent polarization change.

• Korean Chemical Engineering Research
• /
• 제59권4호
• /
• pp.644-651
• /
• 2021

Alkyl amines are widely used in various industries. Nowadays these are also used in CO₂ capture technology because amines react with CO₂ and remove it from the flue gas. To make the amines more compatible towards this technology, physico chemical properties may be altered by mixing with other solvents. In the present report, we measured the refractive properties of pure diisopropylamine (DIPA) (1) + isomeric butanol (2) at 298.15 K to 308.15 K. The 𝚫n values were positive for DIPA + n-butanol or sec-butanol or isobutanol or tert-butanol mixtures. The measured data was correlated with Redlich-Kister equation. The excess molar volume data were predicted from refractive index data using Nakata and Sakurai model. The experimental data were also predicted by various correlations, and the prediction capability of these correlations was reported through standard deviation. Further, the deviation in refractive index (𝚫n) data was interpreted by the consideration of specific molecular interactions between DIPA and isomeric butanol.