• Archives of Plastic Surgery
• /
• 제39권1호
• /
• pp.67-70
• /
• 2012

Massive weight loss results in skin excess, leading to an unsatisfying body contour. Various thigh lift procedures can correct flabby skin in the lower leg. We present a lower body contouring technique with a report on two patients. The procedure is determined by the body contour of the patient. As the skin excess in the thigh area tended to appear mostly on the medial side, a vertical medial thigh lift was considered. Moreover, for patients with a pear/guitar-shaped body contour, we added the spiral thigh lift for skin excess in the buttocks and the lateral thigh area. The extent of tissue to excise was determined by pinching the patient in a standing position. The inferior skin flap was fixed to non-movable tissue, which was helpful for lifting the tissue and preventing the widening of the scar. After the operation, a drain was kept for 3 to 4 days. A compressive garment was used after removing the drain. There were no complications. The patients were discharged 6 to 8 days after the operation. In conclusion, skin excess, especially in the lower body, can be corrected by a thigh lift combining several procedures, varying from person to person.

• 한국항행학회논문지
• /
• 제17권6호
• /
• pp.700-704
• /
• 2013

양자 셀룰라 오토마타(QCA)는 CMOS의 기술을 상속받을 차세대 나노 전자 소자 중 하나이다. QCA는 원자규모 및 초저전력화로 이목이 집중되고 있으며 다양한 QCA 회로들이 제안되었다. 십진 출력을 요하는 전자회로와 마이크로프로세서에서 주로 사용되는 이진화 십진법(BCD)은 연산을 위한 변환은 편하지만 데이터 낭비가 심하다. 본 논문에서는 QCA 회로에서 감산 및 반올림에 효과적으로 이용될 수 있는 BCD-3초과 코드를 제안한다. 제안된 구조는 잡음을 최소화하고 공간 및 시간 복잡도를 고려하여 효율적으로 설계되었으며 시뮬레이션을 통해 검증하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.1
• /
• pp.374-377
• /
• 2003

In this paper, turn on characteristics of (Punch-Through Insulated Gate Bipolar Transistor) PT-IGBT has been studied. Based on the transient power loss, turn on charges first base to collector capacitance. Furthermore we present the charge variation in the base including n+ buffer layer to express the transient turn-on characteristics of the device.

• Journal of the Optical Society of Korea
• /
• 제12권3호
• /
• pp.162-165
• /
• 2008

A novel planar lightwave circuit(PLC) triplexer using a three-waveguide interferometer(TWI) is proposed and examined using the transfer matrix and the beam propagation methods. The proposed triplexer consists of two three-waveguide couplers and three waveguides connecting the couplers. Simulation for the TWI triplexer shows the excess losses of 0.03 dB and 0.94 dB with the crosstalks of -22.3 dB and -14.5 dB in reception, respectively, for the wavelength of 1490- and 1550-nm, while showing the excess loss of 1.75 dB in transmission for the wavelength of 1310 nm. The proposed design shows compact feature as short as 11.5 mm for the refractive-index contrast of 0.45%.

• 한국패션뷰티학회지
• /
• 제4권2호
• /
• pp.22-30
• /
• 2006

This study was done to establish clothing sizing system which can provide good fitting of apparel and minimize the loss due to excess inventory. One demensional mesurments(R. Martin) were made with the subjects, who were girls aged 11 to 12 living in Pusan and Kyungnam. Further the above-said mesurements were used to determine optimal clothing sizes using loss function for establishment of clothing sizing system. According to the results, optimal sizes of upper clothing for the late elementary schoolgirls should include 7 sizes, which will include heightbust circumferencesleeve length. And optimal sizes of lower clothing for the late elementary schoolgirls should include 7 sizes, which will include heightbust circumferencehip circumference.

• Journal of the Optical Society of Korea
• /
• 제9권1호
• /
• pp.1-5
• /
• 2005

Using tightly focused femtosecond laser pulses, we produce an optical waveguide and optical devices in transparent materials. This technique has the potential to generate not only channel waveguides, but also three-dimensional optical devices. In this paper, an optical splitter and U-grooves, which are used for fiber alignment, are simultaneously fabricated in a fused silica glass using near-IR femtosecond laser pulses. The fiber aligned optical splitter has a low insertion loss, less than 4㏈, including an intrinsic splitting loss of 3㏈ and excess loss due to the passive alignment of a single-mode fiber. Finally, we demonstrate the utility of the femtosecond laser writing technique by fabricating gratings at the surface and inside the silica glass.

• ETRI Journal
• /
• 제27권4호
• /
• pp.446-448
• /
• 2005

Using tightly focused femtosecond laser pulses, we produce an optical waveguide and devices in transparent materials. This technique has the potential to generate not only channel waveguides, but also three-dimensional optical devices. In this paper, an optical splitter and U-grooves, which are used for fiber alignment, are simultaneously fabricated in a fused silica glass using near-IR femtosecond laser pulses. The fiber- aligned optical splitter has a low insertion loss, less than 4 dB, including an intrinsic splitting loss of 3 dB and excess loss due to the passive alignment of a single-mode fiber. Finally, we present an output field pattern, demonstrating that the splitting ratio of the optical splitter becomes approximately 1:1.

• Clinical Endoscopy
• /
• 제56권3호
• /
• pp.333-339
• /
• 2023

Background/Aims: Intragastric balloon (IGB) is the only available endoscopic bariatric and metabolic therapy in Korea. End-ball (Endalis) has the longest history of clinical use among the IGBs available in Korea. However, little clinical data on this system have been reported. In this study, we aimed to evaluate the efficacy and safety of End-ball in Korea. Methods: We performed a retrospective cohort study of patients who underwent IGB insertion (End-ball) from 2013 to 2019. Demographic and anthropometric data were collected. The efficacy and safety of IGB treatment were analyzed. Results: In total, 80 patients were included. Mean age was 33.7 years and 83.8% were female. Initial body mass index was 34.48±4.69 kg/m². Body mass index reduction was 3.72±2.63 kg/m² at the time of IGB removal. Percent of total body weight loss (%TBWL) was 10.76%±6.76%. Percentage excess body weight loss was 43.67%±27.59%. Most adverse events were minor, and 71.4% of participants showed nausea, vomiting, or abdominal pain. Conclusions: IGB treatment showed good efficacy and safety profile in Korean patients with obesity. In terms of %TBWL and percentage excess body weight loss, the efficacy was similar to that in the Western population.

• 한국광학회지
• /
• 제17권5호
• /
• pp.469-474
• /
• 2006

본 논문에서는 실리카 기반의 다중모드 간섭기를 이용하여 적은 초과손실을 갖는 $1{\times}16$ 마하젠더 스위치에 대한 설계 및 측정결과에 대하여 논하였다. 제작된 $1{\times}16$ 마하젠더 스위치는 마하젠더 간섭계(Mach-Zehnder Interferometer, MZI) 구조를 갖는 $2{\times}2$ 열광학스위치를 단위소자로 하였으며, 15개의 단위소자를 이용하여 4단(stage)으로 구성하였다. 먼저 광분배기와 $2{\times}2$ MZI 열광학 스위치등의 개별적인 특성을 파악하였고, 그 결과를 전체 소자의 설계에 적용함으로써 보다 좋은 성능을 얻을 수 있었다. 제작된 다중모드 간섭기를 이용한 MZI 구조의 단위스위치 당 초과손실은 최소 -0.5dB로 측정되었다.

• 한국전자통신학회논문지
• /
• 제7권4호
• /
• pp.867-871
• /
• 2012

본 논문에서는 폴리머 테이퍼링 도파로 영역을 포함하는 $1{\times}4$ 형태의 플라스틱 광섬유 커플러를 제안하고 구현하였다. 플라스틱 광섬유와 폴리머 사각 도파로의 접속면에서 광 누설 손실을 줄이기 위해 단면이 원형에서 구형으로 천천히 바뀐 플라스틱 광섬유를 도입하였다. 실리콘 고무로 만들어진 주형을 이용하여 소자를 제작하였다. 제작된 소자는 1.33 dB의 삽입손실과 2.2 dB의 평탄도를 보였다.