• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.524-524
• /
• 2016

본 연구에서는 홍천 자운지구 고랭지 농업지역을 대상으로 장기간의 유역조사와 하천 모니터링을 통해 관측된 축척 데이터를 이용하여 비점오염저감 효과를 정량화하고 추후 모니터링 자료로서 탁수와 비점오염원 저감시설의 저감효과와 비점오염원의 효율적인 관리를 위한 기초자료를 제공하고자 하였다. 모니터링 결과 소양호 유역의 오염부하(1차 강우사상) 중 홍천군 자운지구의 유역단위 비점오염 저감효과의 분석에는 강우량과 단위면적당 오염부하를 이용하였으며, 자운천은 SS 5,396,761 kg, COD 82,261 kg, BOD 57,329 kg, T-N 68,711 kg, T-P 3,091 kg이었으며, 오염부하(2차 강우사상)는 SS 320,293 kg, COD 34,588 kg, BOD 22,350 kg, T-N 48,954 kg, T-P 640 kg으로 나타났다. 또한 소양호 유역의 EMC(1차 강우사상) 중 자운천은 SS 829.9 mg/L, COD 12.7 mg/L, BOD 8.8 mg/L, T-N 10.567 mg/L, T-P 0.475 mg/L 이었으며, EMC(2차 강우사상)는 SS 68.6 mg/L, COD 7.4 mg/L, BOD 4.8 mg/L, T-N 10.487 mg/L, T-P 0.137 mg/L로 나타났다. 소양호 유역의 단위면적당 오염부하(1차 강우사상) 중 자운천은 SS 402.0 kg/ha/event, COD 6.1 kg/ha/event, BOD 4.3 kg/ha/event, T-N 5.118 kg/ha/event, T-P 0.230 kg/ha/event 이었으며, 오염부하(2차 강우사상)는 SS 23.9 kg/ha/event, COD 2.6 kg/ha/event, BOD 1.7 kg/ha/event, T-N 3.646 kg/ha/event, T-P 0.048 kg/ha/event로 나타났다. 오염부하에서는 1차 강우에 비해 2차 강우에서는 SS 5,076,468 mg/L, COD 47,673 mg/L, BOD 34,979 mg/L, T-N 19,757 mg/L, T-P 2451 mg/L로 1차 강우사상에 비해 오염부하가 낮은 것으로 나타났다. 또한 EMC에서는 1차 강우에 비해 2차 강우에서는 SS 761.3 mg/L, COD 5.3 mg/L, BOD 4.0 mg/L, T-N 0.080 mg/L, T-P 0.338 mg/L로 1차 강우사상에 비해 EMC가 저감되었다. 단위면적당 오염부하는 1차 강우에 비해 2차 강우에서는 SS 378.1 mg/L, COD 3.5 mg/L, BOD 2.6 mg/L, T-N 1.472 mg/L, T-P 0.182 mg/L로 1차 강우사상에 비해 EMC가 저감되었다. 강우량과 강우강도 그리고 영농활동의 시기에 따른 EMC와 단위면적당 오염부하는 큰 차이를 보였으며, 예년에 비해 적은 강수량으로 인해 탁수와 비점오염부하의 배출이 상대적으로 적었던 것으로 판단된다. 소양호 유역과 같은 넓은 유역에서 시행되는 비점오염원의 저감연구는 오랜 시간 동안 자료를 축적해야 유의미한 평가가 이루어질 수 있으므로 장기적이고 지속적인 모니터링을 통한 유량 데이터 자료구축과 수질분석뿐만 아니라, 발생되는 비점오염 물질의 관리를 위한 체계적인 연구가 지속되어야하며, 아울러 농민의 인식도 변화 등을 포함하는 많은 인자들을 정밀히 조사하고 다각도로 분석하여 저감효과에 대한 지속적인 연구가 필요하다.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2001.10a
• /
• pp.174-178
• /
• 2001

The piezoelectric thin film sensor can be used to interpret variations in structural and material properties, e.g. for structural integrity monitoring and assessment. To illustrate one of this potential benefit, PVDF film sensors are used for monitoring impact damage initiation in Gr/Ep composite panel. Both PVDF film sensors and strain gages are surface mounted to the Gr/Ep specimens. A series of impact test at various impact energy by changing impact mass and height is performed on the instrumented drop weight impact tester. The sensor responses are carefully examined to predict the onset of impact damage such as matrix cracking, delamination, and fiber breakage, etc. Test results show that the particular waveforms of sensor signals implying the damage initiation and development are detected above the damage initiation impact energy. As expected, the PVDF film sensor is found to be more sensitive to impact damage initiation event than the strain gage.

• Journal of Advanced Marine Engineering and Technology
• /
• v.30 no.2
• /
• pp.247-252
• /
• 2006

Almost ship monitoring systems are event driven alarm system which warn only when the measurement value is over or under set point. These kinds of system cannot warn until signal is growing to abnormal state that the signal is over or under the set point. therefore cannot play a role for preventive maintenance system. This paper proposes fault diagnosis method which is able to diagnose and forecast the fault from present operating condition by analyzing monitored signals with present ship monitoring system without any additional sensors. By analyzing the data with high correlation coefficient(CC), correlation level of interactive data can be defined. Knowledge base of abnormal detection can be built by referring level of CC(Fault Detection CC. FDCC) to detect abnormal data among monitored data from monitoring system and knowledge base of diagnosis built by referring CC among interactive data for related machine each other to diagnose fault part.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2005.06a
• /
• pp.281-286
• /
• 2005

Almost ship monitoring systems are event driven alarm system which warn only when the measurement value is over or under set point. These kinds of system cannot warn while signal is growing to abnormal state until the signal is over or under the set point and cannot play a role for preventive maintenance system. This paper proposes fault diagnosis method which is able to diagnose and forecast the fault from present operating condition by analyzing monitored signals with present ship monitoring system without additional sensors. By analyzing this data having high correlation coefficient(CC), correlation level of interactive data can be understood. Knowledge base of abnormal detection can be built by referring level of CC(Fault Detection CC, FDCC) to detect abnormal data among monitored data from monitoring system and knowledge base of diagnosis built by referring CC among interactive data for related machine each other to diagnose fault part.

• Proceedings of the KIEE Conference
• /
• 2002.11b
• /
• pp.62-64
• /
• 2002

Power quality monitoring system is devoted to more concern than before, because the innovation of industrial technology needs more accurate instruments and more advanced power quality. Therefore, this paper is proposed to use digital protective relays for power quality monitoring. In addition, taking power quality events, Electrical magnetic phenomenon of IEEE std 1159, proposing that adaptive power quality event list consider limitation memory capacity and signal processing ability of protective relay. The prototype S/W of power quality analysis is also developed. Especially this prototype S/W analysis scheme is verified through many kinds of power quality events (gathering protective relay data) in EMTP simulation.

• The Journal of Engineering Geology
• /
• v.24 no.4
• /
• pp.609-613
• /
• 2014

The Korean Peninsula, located at the southeastern tip of the Eurasian Plate, is known to be tectonically stable, and no critical evidence has yet been found that would override the safety design of nuclear facilities in South Korea. Because a nuclear power plant, like other major social overhead capital facilities, could cause great damage to both the environment and society through an unexpected tectonic event, even one of extremely low probability, like the Fukushima accident, a defense-in-depth safety approach is required in geological and geotechnical site safety evaluation for nuclear projects. This paper introduces the regulatory procedures that are in place to confirm nuclear site safety and site monitoring (e.g., earthquakes and groundwater) systems applied to nuclear facilities in order to reduce inherent uncertainties within the site safety review of geological and seismological issues related with a NPP project.

• Journal of Korean Society of Water and Wastewater
• /
• v.25 no.5
• /
• pp.751-757
• /
• 2011

The monitoring technique based on electrical conductivity (EC) can provide researchers with some advantages in maintenance management and is cost-effective as compared with existing CSOs monitoring. In this study, the flow rate estimation using EC data was executed in two sites where storm overflow chamber had installed. In the result of A-site, R2 of second order multinomial between dilution ratio of EC and observed flow rate was showed the range of 0.68 ~ 0.77. And $R^{2}$ of B-site was 0.62 ~ 0.81. On the other hand, cumulative frequency of A-site was 43.4 ~ 52.2% in the relative error level of under 20%. And B-site was 10.1 ~ 46.5%. The flow rate estimation formula was improved through consideration of some parameters including antecedent dry days and rainfall duration. And difference between estimated flow rate and observed flow rate in total rainfall event was very small.

• Proceedings of the KOSOMBE Conference
• /
• v.1995 no.05
• /
• pp.155-159
• /
• 1995

A design method that can easily construct intelligent patient monitoring systems is proposed. To achieve the design method, the SES/MB concept and a discrete event-based logic control formalism based on a set theory is introduced. In this control paradigm the controller expects to receive confirming sensor responses to its control commands within definite time windows determined by DEVS model of the system under control. Because data to be used for rule-based symbolic reasoning are to be abstracted, several AI methods are applied the processes. These methods are applied to intelligent patient monitoring systems so that they facilitate transformation from low level raw data to high level linguistic data. Model-based system representations have advantages of reusability, extensibility, flexsibility, independent testability and encapsulation.

• Journal of the Semiconductor & Display Technology
• /
• v.15 no.3
• /
• pp.40-45
• /
• 2016

In this paper, the fire engine pump is controlled and monitored by the AJAX (Asynchronous Javascript and Xml) in the web server. The embedded system with built-in system having a processor and a memory of high performance occurs many problems in transmitting the large amount of data in real time through the web server. The AJAX is different from HTML (Hyper Text Makeup Language) with java script technology and can make RIA (Rich Internet Application). It process the necessary data by using asynchronous and it take advantage of usefulness, accessibility, a fast response time. Using AJAX can build up web server with real time and monitoring that fire engine pump status, check processing pump memory in the event of fire, also remotely monitors can do. The web server system can control the fire engine pump as like the black box. The experimental results show the effectiveness and commercialize possibility.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.7
• /
• pp.1321-1328
• /
• 2008

The monitoring and controlling systems on middleware for agriculture service instead of pigpen is focused on context-awareness and event-centric structure in this paper. By processing and monitoring context information which obtained from a sensor field, the u-Farm middleware is to promptly provide the response for various queries from agriculture's application service. It allows a device to provide optimal ubiquitous farm environment.