• 한국자원리싸이클링학회:학술대회논문집
• /
• 한국자원리싸이클링학회 2006년도 춘계임시총회 및 제27회 학술발표대회
• /
• pp.78-85
• /
• 2006

In textile industries, waste effluent containing zinc is generated during the manufacture of rayon yarn from the wood pulp or cotton linters. Due to the strict environmental regulations and the presence of toxic metallic and other constituents, the discharge of industrial effluents in the sewage or disposal of solid sludge as landfill is restricted. Before recycling of zinc as zinc sulphate solution to the spinning-bath of the rayon manufacturing plant the zinc sulphate solution must be free from calcium, which is deleterious to the process as gypsum precipitates with the increase in concentration and forms scale in the bath. In the present work an attempt has been made to develop a process following solvent extraction technique using thiophosphinic extractants, Cyanex 272 and 302 modified with isodecanol and diluted in kerosene to recover zinc from rayon effluent. Various process parameters viz. extraction of zinc from different concentration of solution, distribution ratio, selective extraction, O/A ratio on extraction and stripping from the loaded organic, complex formation in the organic phase etc. have been studied to see the feasibility of the process. The extractant Cyanex 302 has been found selective for the recovery of 99.99% of zinc from the effluent above equilibrium pH 3.4 maintaining the O/A ratio of 1/30 leaving all the calcium in the raffinate. It selectively extracted zinc in the form of complex $[R_{2}Zn.3RH]_{org}$ and retained all the calcium in the aqueous raffinate. The zinc from the loaded Cyanex 302 can be stripped with 10% sulphuric acid at even O/A ratio of 10 without affecting the stripping efficiency. The stripped solution thus obtained could be recycled in the spinning bath of the rayon plant. The raffinate obtained after the recovery of zinc could be disposed safely without affacting environment.

• Tribology and Lubricants
• /
• 제23권5호
• /
• pp.201-206
• /
• 2007

The bent-axis type piston pump which is driven by the piston rod works on the way that the piston rod drives the cylinder block, so the taper angle of the piston rod and the swivel angle between the cylinder block and the shaft are very important design factors. If the above factors cannot satisfy the conditions of optimum design, the friction loss between the cylinder bore and the piston increases, and the pump can even fail to work under conditions of severe friction and wear. Since the piston reciprocates in the cylinder bore with high velocity, and at the same time it rotates on its own axis and revolves on the center of the cylinder block, the decrease of the volume efficiency generated on account of the leakage between the cylinder bore and the piston. Therefore, to prevent this case, the piston ring is designed at the end of the piston, and the friction characteristics between the piston ring and the cylinder bore are in need of research due to its great influence on the performance of piston pump. Thus, in this paper, the elastic hydraulic oil's lubrication analyses of the film thickness, the pressure distribution, and the friction force, and so on, have been performed, and the lubrication characteristics between the piston ring and the cylinder bore are explored by the results of the numerical analysis, and it is contributed to realize the higher efficiency and the more advanced performance of the bent-axis type piston pump.

• 한국균학회지
• /
• 제45권1호
• /
• pp.1-13
• /
• 2017

산림에서 나는 뽕나무버섯속(Armillaria)은 봄부터 가을에 걸쳐 나는 식용버섯으로 유기물을 분해하는 백색부후 부생균(saprophyte)이면서 동시에 나무를 죽이는 뿌리기생 병원균으로 비절대기생체(nonobligate parasite) 또는 임의기생체 (facultative parasite)이다. 이들은 산림생태계에서 자연간벌과 천이에 큰 기여를 한다. 이 속에는 전세계 40여 종이 알려져 있고 기주식물로는 침엽수, 활엽수, 목본덩굴식물과 초본식물도 포함한다. 이 버섯의 유전적 개체(genet)는 산림에서 수명이 길어서, 약 2,000여년을 살면서 약 960 ha의 면적까지도 퍼져 나가기도 한다. 간벌 등 숲가꾸기로 그루터기가 많이 생기는 요즘 산림에서 발생량이 증가하고 있으며, 산촌에서 중요한 소득원으로 인식되고 있다. 따라서 뽕나무버섯에 대하여 정확한 동정이 필요하다. 이 총설에서는 뽕나무버섯속의 분류학적 문제와 국내 7개 분포 종의 형태에 의한 분류검색표, 산림생태학적 및 산림병리학적 의미를 토의하였다.

• 한국해양바이오학회지
• /
• 제5권4호
• /
• pp.40-45
• /
• 2011

Microalgae are one of the major, sustaining components of ecosystem processes and are responsible for biogeochemical reactions that drive our climate changes. Despite this, many marine microalgae are poorly described and little is known of their abundance and distribution along the coastal areas of Sooyoung Bay, Busan, South Korea. The present study has been conducted from November, 2011 to August, 2009 with the objective to provide an overview of the taxonomy diversity and abundance of microalgae along the coastal areas of the Sooyoung Bay. Water samples were collected from different sites, which were located by using a GPS tracker. Chlorophyll fluorescence of the water samples were measured by using ToxY-PAM dual-channel yield analyzer. The chlorophyll fluorescence values were relatively higher during the spring and summer and even in the region near to the sea port. Similarly the abundance of microalgae was higher near the port but diversity index had lower values. The temperature and pH values were same at all the sites. However, only the temperature varied during the sampling period, with higher values during summer and lower in winter. From the preliminary results, the following class of microalgae were found; Bacillariophyceae, Dinophyceae, Silicoflagellate and Cryptophyceae. With a future ongoing work, microalgae are being isolated to establish single cell culture and for identification using light microscopic observations, photography and molecular approaches.

• Smart Structures and Systems
• /
• 제20권3호
• /
• pp.369-383
• /
• 2017

In this work, the effects of moisture and temperature on free vibration characteristics of functionally graded (FG) nanobeams resting on elastic foundation is studied by proposing a novel simple trigonometric shear deformation theory. The main advantage of this theory is that, in addition to including the shear deformation influence, the displacement field is modeled with only 2 unknowns as the case of the classical beam theory (CBT) and which is even less than the Timoshenko beam theory (TBT). Three types of environmental condition namely uniform, linear, and sinusoidal hygrothermal loading are studied. Material properties of FG beams are assumed to vary according to a power law distribution of the volume fraction of the constituents. Equations of motion are derived from Hamilton's principle. Numerical examples are presented to show the validity and accuracy of present shear deformation theories. The effects of hygro-thermal environments, power law index, nonlocality and elastic foundation on the free vibration responses of FG beams under hygro-thermal effect are investigated.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2000년도 추계학술대회
• /
• pp.153-162
• /
• 2000

A field study was performed to test effectiveness of a bloluminescent genetically engineered microorganism (GEM) for bioremediation process monitoring and control. The study employed Pseudomonas fluorescens HK44 that was the first strain approved for field application in the U.S. for bioremediation purposes. HK44 contains lux gene fused within a naphthalene degradative pathway, allowing this GEM to bioluminesce as it degrades naphthalene as well as substituted naphthalenes and other polycyclic aromatic hydrocarbons (PAHs) , Results showed that HK44 was maintained in both PAH-contarninated and uncontaminated soils even 660 days after inoculation. HK44 was able to produce bioluminescence in response to PAHs in soil. Although effectiveness of chemical remediation was not assessed due to heterogeneous distribution of contaminants, decreased concentration of naphthalene was shown in the soils, Taken together, HK44 was useful for in situ bioremediation process monitoring and control. This work is so far the only field release of a GEM for bioremediation purposes.

• 한국경제지리학회지
• /
• 제11권1호
• /
• pp.111-129
• /
• 2008

본 연구는 1990년대 이후에 나타난 중앙정부 지역정책의 패러다임 변화를 논의하였다. 특히, 지역정책의 발상지인 영국에서 1928년부터 2000년대까지 전개되어온 중앙정부의 지역정책 변화를 살펴보되 최근 10년간의 동향에 초점을 맞추었다. 최근 10년간의 주요 변화는 지역격차 완화를 위해 규제와 지원을 통해 산업과 인구의 공간분포를 변형시키고자 하는 중앙정부의 개입주의적인 하향식 지역정책이 지역경쟁력 강화와 그것을 위한 지역발전의 분권화를 추진하는 지역정책으로 전환하고 있다는 것이다. 그리고 그러한 전환 속에서도 영국 중앙정부는 지역격차 완화를 계속 추구해오고 있다. 또한 본고는 영국 중앙정부의 지역정책 변화가 대내외 환경 변화 속에서 우리나라 중앙정부의 향후 지역정책 방향 설정에 던져주는 시사점을 제시하였다.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2001년도 추계종합학술대회
• /
• pp.487-490
• /
• 2001

디지털 워터마킹 기술은 표준화된 저작권 정보의 확립과 함께 건전한 디지털 정보의 유통을 위해서 반드시 요구되는 기술로 평가받고 있다. 워터마크 방법은 데이터 압축과 같은 영상처리에 의해서 쉽게 워터마크 정보가 손실되는 문제점이 있으므로 디지털 워터마킹의 최우선 과제는 일반적인 영상처리에 의해 워터마크된 영상이 다양한 공격을 받더라도 소유권 주장을 할 수 있는 강인성이 요구된다. 따라서, 본 논문에서는 이산 웨이브렛 변환을 이용해서 그레이-레벨 워터마크 영상을 원영상에 비시각적으로 삽입하면서 강인성을 유지시킬 수 있는 방법을 제안한다. 기존의 대부분 워터마킹 방법은 원영상에 비해 매우 작은 워터마크 데이터 또는 2진 영상 로고 데이터를 이용했지만, 제안한 방법은 256$\times$256 그레이-레벨 영상을 삽입시킬 수 있는 방법이다. 시험결과 Low-pass Filter, JPEG압축과 같은 공격에 대해서도 소유권을 주장할 수 있는 고화질 영상 데이터를 추출할 수 있었다.

• Structural Engineering and Mechanics
• /
• 제89권3호
• /
• pp.225-238
• /
• 2024

In this paper, a quasi-3D hyperbolic shear deformation theory for the bending responses of a functionally graded (FG) porous micro-beam is based on a modified couple stress theory requiring only one material length scale parameter that can capture the size influence. The model proposed accounts for both shear and normal deformation effects through an illustrative variation of all displacements across the thickness and satisfies the zero traction boundary conditions on the top and bottom surfaces of the micro-beam. The effective material properties of the functionally graded micro-beam are assumed to vary in the thickness direction and are estimated using the homogenization method of power law distribution, which is modified to approximate the porous material properties with even and uneven distributions of porosity phases. The equilibrium equations are obtained using the virtual work principle and solved using Navier's technique. The validity of the derived formulation is established by comparing it with the ones available in the literature. Numerical examples are presented to investigate the influences of the power law index, material length scale parameter, beam thickness, and shear and normal deformation effects on the mechanical characteristics of the FG micro-beam. The results demonstrate that the inclusion of the size effects increases the microbeams stiffness, which consequently leads to a reduction in deflections. In contrast, the shear and normal deformation effects are just the opposite.

• 한국구조물진단유지관리공학회 논문집
• /
• 제21권3호
• /
• pp.102-113
• /
• 2017

비정형 판 부재의 탄소성 좌굴 강도를 평가할 수 있는 새로운 지표를 제안하였다. 부재 경계면에 작용하는 하중 또는 경계면의 변화에 따른 외부일 또는 변형에너지를 부재의 평형 변형경로에 따라 계산하고, 이 에너지의 이차 변분량의 부호가 양에서 음으로 바뀌는 시점을 안정한계로 제안하였다. 판 부재의 단면력을 등분포 또는 선형으로 근사한 상태로 단면력을 사용하여 좌굴한계를 평가하는 현 기법과는 반대로 단면력의 변화가 비선형적인 복잡한 경우에도 간단히 좌굴한계를 평가할 수 있다. 선형탄성 문제에 대해서는 본 기법의 결과와 전통적인 방법이 동일한 결과를 도출한다.