• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.12 no.6
• /
• pp.420-430
• /
• 2002

Rating scales for environmental noise are varied in their calculation procedure. Among them WECPNL (weighted equivalent continuous perceived noise level) is the rating scale for aircraft noise currently being used in domestic and applied only for aircraft noise. However $L_{dn}$ calculated from $L_{eq}$ $L_{eq}$ is used as a rating scale for not only aircraft noise but also environmental noise. Besides, it is easy to calculate and internationally preferred. It is, therefore, not adequate for the evaluation of residents' exposure. Moreover it is very difficult to measure the aircraft noise by WECPNL due to the complicated calculating procedures if automatic measuring system is not used. Accordingly. this study aims to propose alternative evaluation procedure for the aircraft noise. To achieve this purpose, the data measured by automatic measuring system were gathered and calculated with three evaluation procedures : WECPNL $L_{eq}$ and $L_{dn}$, and the results calculated from different methods were compared and analyzed.

• Journal of Korean Society for Quality Management
• /
• v.49 no.1
• /
• pp.47-60
• /
• 2021

Purpose: This study proposes methods and procedures for evaluating imaging security systems quality of cabinet x-ray screening system to enhance performance certification technology. Also, conducted a comparative analysis of the literature of test-kit for imaging security quality evaluation. Methods: Comparative analysis of the test-kits and related documents for image quality assessment of cabinet x-ray screening equipment. This allows assessment items were selected and the methods for each assessment item were proposed. In addition, the configuration method of the assessment team was established by applying the technology readiness assessment(TRA). Results: Four of the assessment items were selected when estimate image quality by a comparative analysis of literature. For each assessment item, the evaluation method and minimum level of availability were determined. Finally, this paper proposes an imaging quality assessment of cabinet X-ray imaging security systems. Conclusion: Development of imaging security systems evaluation procedures for cabinet X-ray screening systems can be help improve performance certification of aviation security equipment.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.19 no.6
• /
• pp.703-711
• /
• 2016

The purposes of this study is to identify the problems arising from current Test & Evaluation process of the naval ship acquisition program and to suggest methods to increase the acquisition efficiency. Considering that the present rule of developmental test &evaluation(DT&E) and operational test & evaluation(OT&E) has caused an inefficiency effect on the acquisition procedures due to the limited practices on it, the DT&E and OT&E procedures through test & evaluation master plan(TEMP) is proposed based on the selective practices of the defense instruction articles. Also, considering characteristics of naval ship acquisitions, efficient procedure systems are derived through case analysis results by comparing each performances of the system. The suggested methods are able to meet the requirements of the changed acquisition environments and also increase efficiency of acquisition systems by adoption of DT&E and OT&E combined test scheme.

• Journal of the Ergonomics Society of Korea
• /
• v.18 no.3
• /
• pp.105-125
• /
• 1999

As speech is the human being's most natural communication medium, using it gives many advantages. Currently, most user interfaces of a computer are using a mouse/keyboard type but the interface using speech recognition is expected to replace them or at least be used as a tool for supporting it. Despite the advantages, the speech recognition interface is not that popular because of technical difficulties such as recognition accuracy and slow response time to name a few. Nevertheless, it is important to optimize the human-computer system performance by improving the usability. This paper presents a set of guidelines for designing speech recognition interfaces and provides a method for evaluating the usability. A total of 113 guidelines are suggested to improve the usability of speech-recognition interfaces. The evaluation method consists of four major procedures: user interface evaluation; function evaluation; vocabulary estimation; and recognition speed/accuracy evaluation. Each procedure is described along with proper techniques for efficient evaluation.

• Journal of Mechanical Science and Technology
• /
• v.20 no.12
• /
• pp.2061-2078
• /
• 2006

The main purpose of this paper is to establish the high temperature structural integrity evaluating procedures for the next generation reactors, which are to be operated at over 500$^{\circ}C$ and for 60 years. To do this, comparison studies of the high temperature structural design codes and assessment procedures such as the ASME-NH (USA), RCC-MR (France), DDS (Japan), and R5 (UK) are carried out in view of the accumulated inelastic strain and the creep-fatigue damage evaluations. Also the application procedures of the ASME-NH rules with the actual thermal and structural analysis results are described in detail. To overcome the complexity and the engineering costs arising from a real application of the ASME-NH rules by hand, all the procedures established in this study such as the time-dependent primary stress limits, total accumulated creep ratcheting strain limits, and the creep-fatigue damage limits are computerized and implemented into the SIE ASME-NH program. Using this program, the selected high temperature structures subjected to two cycle types are evaluated and the parametric studies for the effects of the time step size, primary load, number of cycles, normal temperature for the creep damage evaluations and the effects of the load history on the creep ratcheting strain calculations are investigated.

• The Korean Journal of Emergency Medical Services
• /
• v.21 no.3
• /
• pp.59-71
• /
• 2017

Purpose: The purpose of the study was to evaluate the ergonomic risk factors of 119 emergency medical technicians (EMT) with musculoskeletal disorders, performing emergency medical services (EMS) procedures in a firefighter combat challenge. Methods: The evaluated EMT procedures were cardiopulmonary resuscitation (CPR) & intubation, trauma patient assessment, and intravenous (IV) injection. Measurement of working posture was done during training. Results: In CPR & intubation, OWAS-score was 2 (mean 1.9, maximum 4), requiring correction action, while REBA-score was 11 (mean 7.28, maximum 11), requiring immediate improvement. In trauma patient assessment & IV injection, OWAS-score was 4 (mean 2.9, maximum 4), requiring immediate correction action, while the REBA score was 7 (mean 7.5, maximum 11), requiring improvement. Conclusion: Both OWAS score and REBA-score showed improvement of posture and high-risk of musculoskeletal disorders. Occupational health management in EMS procedures during combat challenge and effective injury prevention program in fire stations are warranted.

• The Journal of Korean Association of Computer Education
• /
• v.11 no.6
• /
• pp.39-51
• /
• 2008

There exist many differences between the revised Informatics curriculum in 2007 and the current Informatics curriculum in junior-high school. The revised Informatics curriculum emphasized on the computer science principles and problem solving ability instead of the application program usage. Since the revised Informatics curriculum introduces a new section called 'Problem-solving methods and procedures', which is not included in the current computer curriculum, the development of achievement standards and assessment standards were needed in this section. This paper developed the achievement standards and assessment standards in 'Problem-solving methods and procedures' section in order to give the guideline of the teaching strategies and evaluation methods in the revised Informatics curriculum.

• Journal of radiological science and technology
• /
• v.44 no.5
• /
• pp.451-457
• /
• 2021

Recently, the number of interventional procedures has increased dramatically as an alternative of invasive surgical procedure and patient radiation exposure is also increasing accordingly. In this study, we evaluated the patient dose of major interventional procedures nationwide and we established our Korean database. With these results, we tried to suggest the reference dose level for major interventional procedures. We evaluated patent dose data in the field of interventional radiology from foreign countries. Measurement of radiation dose exposure for 11 major interventional procedures was conducted using embedded DAP meters in 10,006 patients from 47 hospitals, and reference level of each interventional procedure was suggested. The DRLs of each intervenional procedure are as follows: TACE 206(Gy·cm²), AVF 12(Gy·cm²), LE intervention 43(Gy·cm²), TFCA 122(Gy·cm²), Cerebral aneurysm coil embolization 214(Gy·cm²), PTBD 22(Gy·cm²), Biliary stent 60(Gy·cm²), PCN 7(Gy·cm²), Hickman catheter 2.1(Gy·cm²), Chemoport 1.4(Gy·cm²), BAE 104(Gy·cm²). Compared with the previously established DRL in 2012, the radiation dose decreased in all 10 interventional procedures. In the future, continuous publicity and education on the radiation dose reduction will be needed.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.4A
• /
• pp.659-675
• /
• 2006

Recently, significant progress has been made in performance-based engineering methods that rely mainly on nonlinear static seismic analysis procedures. The Capacity Spectrum Method (CSM) and the Displacement Coefficient Method (DCM) are the representative nonlinear static seismic analysis procedures. In order to evaluate the applicability of the procedures to the seismic evaluation and design process of new and existing structures, the accuracy of both CSM and DCM should be evaluated in advance. The accuracy of seismic responses by the nonlinear static procedures is evaluated in comparison with the shaking table test results for the structural wall specimen subjected to the far field and near field earthquakes. Also conducted are comparative studies where the shaking table test results are compared with those from nonlinear dynamic analysis procedures, i.e., Single-Degree-of-Freedom (SDOF), equivalent SDOF and Multi-Degree-of-Freedom (MDOF) systems.

• Proceedings of the CALSEC Conference
• /
• 2003.09a
• /
• pp.148-154
• /
• 2003

An Evaluation System of Personal Information Competency was developed to evaluate individual Information competency and maturity levels in the enterprises of the information environment. The Evaluation System measures the requirements of information knowledge, skills, and mindset with the evaluation indices of personal information maturity. The indices are customized to four types of business departments - strategy Planning, development/maintenance, business applications, and administration support. Also, a maturity model of personal information competency is defined for interpretation of the evaluation results. The system was applied to assessment of actual human resources, 124 workers in an enterprise, to testify to its practical value. The case evaluation procedures include a series of questionnaires, written tests and application tests.