• Journal of the Korea institute for structural maintenance and inspection
• /
• v.14 no.6
• /
• pp.238-245
• /
• 2010

Progressive collapse is defined as a collapse caused by sectional destruction of a structural member which links to other surrounding structures. Currently the design guidelines for the prevention of progressive collapse is not available in Korea. So, structural engineers have a difficulty in evaluating progressive collapse. In this study, the static and dynamic analysis to evaluate the methods and procedures are conducted using commercial analysis program for RC moment resisting frames. According to the study, DCR value of RC moment resisting frame system based on code in Korea is over 2 and it shows that it can't provide alternate load paths due to the progressive collapse. And additional reinforcement should be considered for the progressive collapse resistance. As a result of vertical deflection and DCR value of linear static analysis and linear dynamic analysis, the results of dynamic analysis were underestimated more than the result of static analysis. Thus, the dynamic coefficient value of 2 provides conservative estimation.

• Journal of Periodontal and Implant Science
• /
• v.38 no.sup2
• /
• pp.385-394
• /
• 2008

Purpose: The aim of this study was to evaluate the factors affecting healing patterns of surgically created circumferential gap defects around implants in dogs. Materials and Methods: In four mongrel dogs, all mandibular premolars were extracted. After 8 weeks of healing periods, implants were submerged. According to the surface treatment, turned surface was designated as a group A and rough surface as a group B. In each dog, surgical defects on the left side were made with a customized tapered step drill and on the right with a customized paralleled drill. Groups were also divided according to the width of the coronal gaps: 1.0mm, 1.5mm, or 2.0mm. The dogs were sacrificed following 8 weeks and the specimens were analyzed histologically and histomorphometrically. Results: During the postoperative period, healing was uneventful and implants were well-maintained. As the size of the coronal gap was increased, the amount of bone-to-implant contact was decreased. The bone healing was greater in rough surface implants compared to the turned ones. About the defect morphology, tapered shape showed much bone healing and direct bone to implant contact even in the smooth surface implants. Conclusion: Healing of the circumferential defect around dental implant is influenced by the implant surface, defect width and the morphology of the defect. When using rough surface implants, circumferential gap defects within 2 mm do not need any kinds of regenerative procedures and the healing appeared to be faster in the tapered defect morphology than the paralleled one.

• Journal of Convergence for Information Technology
• /
• v.10 no.4
• /
• pp.11-17
• /
• 2020

South Korea started to actively participate in the ODA project across Asia, Africa, the Middle East, CIS countries, and Latin America as it transitioned from a country receiving developmental aid to a donor country. As more and more recipient countries are looking into the e-government model of South Korea, a new approach to the Korean model is being investigated. Various promotions were made, ranging from the implementation of the e-government ODA project, review of its feasibility to evaluation of the results. In order to improve and maximize performance management OD projects, it is necessary to look into the analysis of its follow-up results. In this study, practical performance management and policy implications were explored, focusing on the e-government ODA project. In particular, a case study analysis was attempted with focus on the Nigerian e-government project promoted as part of the project. It focused on Korea's e-government linkage process, implementation procedures and strategies applied when establishing the e-government master plan and suggested the necessity of an approach suitable for new environmental changes. In terms of sustainability of the ODA project, it is necessary to build a Korean e-government model that reflects the new intelligence information technology.

• Korean Journal of Poultry Science
• /
• v.40 no.3
• /
• pp.223-234
• /
• 2013

Poultry industry is abounding day by day as it engrosses less cost of investment per bird as compared to large animals. Poultry have the most copious genomic tool box amongst domestic animals for the detection of quantitative trait loci (QTL) and marker assisted selection (MAS). Use of multiple markers and least square techniques for mapping of QTL affecting quality and production traits in poultry is in vogue. Examples of genetic tests that are available to or used in industry programs are documented and classified into causative mutations (direct markers), linked markers in population-wide linkage disequilibrium (LD) with the QTL (LD markers), and linked markers in population wide equilibrium with the QTL (LE markers). Development of genome-wide SNP assays, role of 42 K, 60 K (Illumina) and 600 K (Affymetrix$^{(R)}$ Axim$^{(R)}$) SNP chip with next generation sequencing for identification of single nucleotide polymorphism (SNP) has been documented. Hybridization based, PCR based, DNA chip and sequencing based are the major segments of DNA markers which help in conducting of MAS in poultry. Economic index-marker assisted selection (EI-MAS) provides platform for simultaneous selection for production traits while giving due weightage to their marginal economic values by calculating predicted breeding value, using information on DNA markers which are normally associated with relevant QTL. Understanding of linkage equilibrium, linkage dis-equilibrium, relation between the markers and gene of interest are quite important for success of MAS. This kind of selection is the most useful tool in enhancing disease resistance by identifying candidate genes to improve the immune response. The application of marker assisted selection in selection procedures would help in improvement of economic traits in poultry.

• Journal of Veterinary Clinics
• /
• v.31 no.5
• /
• pp.367-370
• /
• 2014

The study was to observe hemodynamic alterations of cardiac function to design a model of canine mitral valve insufficiency (MVI) based on chordae tendinae rupture (CTR). Ten healthy beagles with normal heart function were used in this study. To measure hemodynamics, the patient monitor was equipped for invasive blood pressure and a Swan-Ganz catheter. Hemodynamic alterations were checked promptly during CTR procedures. MVI model was made by transection of the chordae tendinae with small arthroscopy hook knife through $5^{th}$ intercostal open chest. Color Doppler at the level of the mitral valve showed high-velocity regurgitant flow immediately after CTR at intraoperative echocardiography. In hemodynamic measurements, pulmonary capillary wedge pressure (PCWP) was significantly increased, while mean arterial pressure (MAP), venous pressure (VP), pulmonary arterial pressure (PAP), cardiac output (CO) and cardiac index (CI) were significantly decreased after CTR. It was known that the left atrium was overloaded by regurgitant volume from the left ventricle. In conclusion, the MVI model induced by CTR technique in this study should be used as suitable one for the effective research of canine mitral valve disease. Further study should be needed to measure the chronic alternation of mitral valve in the model.

• Korean Journal of Veterinary Research
• /
• v.40 no.2
• /
• pp.383-391
• /
• 2000

Milk urea nitrogen (MUN) determination is being used an indicator of the protein-energy balance in dairy herds. A faulty balance can be corrected to optimize milk production and animal health. This parameter is regarded as a potential tool to evaluate suboptimal feeding practices and reproductive disorders. Therefore, the purpose of this study was to investigate the response of milk composition by regular feeding analysis and to compared the relationship between MUN and milk protein(MP) and fertility at the insemination period in Holstein dairy cows. Total of 355 artificial insemination (AI) for 150 Holstein cows in the herd were used to examine the relationship between MUN and MP content and conception rate. The AI occured for the cows 50 to 150 day in milk, and MUN and MP concentration were determined using automated infrared procedures. The mean${\pm}$standard deviation of MUN and MP concentration in the herd were $15.6{\pm}2.1mg/dl$ and $3.23{\pm}0.38%$, respectively. MUN contents of bulk milk were increase by elevated crude protein intake. The conception rate was lower in the cows in which the level of MUN was lower than > 8.0mg/dl (10.0%) or > higher than 25mg/dl (15.4%) relative to the cows in MUN content of 12.0~17.9 mg/dl (36.7%) at the time of insemination. Also, lower MP than 3.0% or higher MP than 3.25% were associated with a lower conception rates. Consequently, MUN and MP analyses may be used serve as a monitoring tool of protein and energy nutritional balance to improve reproduction efficiency in Holstein dairy cows.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.23 no.2
• /
• pp.429-449
• /
• 1996

An objective definition of the anomaly is not avaliable and most investigators define the term differently or fail to describe their criterion. Because dental anomaly may lead to many complications, early detection and diagnosis of dental anomalies are essential steps in the evaluation of the child patient and in treatment planning. These procedures require detailed medical and dental histories, through clinical examination and the use of radiographs. So, this study was designed to find out the prevalence of dental anomalies. The clinical and roentgenographic examination was undertaken for 8,054 children at age from 0 to 15 years and statistical analysis was done. The results were as follows : 1. Among the examined subjects, 2,134 subjects(26.5%) showed dental anomalies. The prevalence of individual dental anomalies were as follows : supernumerary teeth 15.6%, congenitally missing teeth 6.6%, fusion 2.2%, odontoma 0.35%, microdontia 1.2%, macrodontia 0.05%, gemination 0.22%, talon cusp 0.36%, dens evaginatus 0.24%, dens invaginatus 0.15%, dilaceration 0.27%, taurodontism 0.09%, abnormal tooth position 1.7%, natal & neonatal teeth 0.92%, amelogenesis imperfecta 0.01%. 2. Significant correlations between the groups with individual dental anomalies were as follows : between group I and other groups, there was negative correlation, especially group I and group II. And the correlation coefficient between male and female showed differences. 3. For the supernumerary teeth group, the prevalence of male was higher than female(p<0.001). While for the congenitally missing teeth, macrodontia, microdontia, abnormal tooth position group, the prevalence of female was greater than male(p<0.001). 4. For the congenitally missing teeth group, the mandibular primary lateral incisor showed the highest incidence in primary dentiton, while mandibular lateral incisor in permanent dentition. In the mandible(72.5%), this site showed higher prevalence than in maxilla. In the case with deciduous congenitally missing teeth, the prevalence of successive permanent congenitally missing teeth was about 33.9%, the incidence was highest in mandibular lateral incisors. 5. Most supernumerary teeth existed on middle area and showed inverted position and unerupted state. In addition, supernumerary teeth showed higher incidence on maxilla (99.3%). 6. In the case with deciduous fused teeth, the prevalence of successive permanent congenitally missing teeth was 39.9%, while that of successive permanent fused teeth was 2.7%. And the highest rate of the prevalence (40.3%) appeared in fusion of mandibular deciduous lateral incisor and canine. 7. In the case of odontoma, the prevalence was higher in maxilla(78.6%) and anterior region(82.7%) than mandible and posterior region.

• The Journal of Korea Assosiation for Disability and Oral Health
• /
• v.5 no.1
• /
• pp.12-17
• /
• 2009

Background : To do dental treatments successfully for dentally disabled patients who are unable to cooperate to procedures needs deep sedation (DS) or general anesthesia (GA). But there are some difficulties in selecting DS because of some disadvantages such as airway problem etc. But, if we select appropriate cases, DS would be better than GA. Methods : We reviewed total 238 cases of patients who had received dental treatments under GA or DS at the clinic for the disabled in Seoul National University Dental Hospital from November 2007 to February 2009. To compare anesthesia condition between DS and GA, we reviewed preanesthesia evaluation sheet, anesthesia or sedation records and PACU sheets retrospectively. Results : The number of DS cases was 25 (11%) and that of GA was 218 (89%). To maintain DS, intravenous propofol was infused with syringe pump (100%), and sevoflurane (134 cases) or propofol (13 cases) were used for sedation induction. Mean total treatment time for DS was 36 min and 2 hour 25 min for GA. The recovery time at PACU was 44 min for DS and 80 min for GA. There were no severe complications in DS, but 18 cases showed nausea and vomiting in GA. Conclusion : Deep sedation for disabled dental patients should be selected for effective behavioral control in conjunction with general anesthesia, considering duration and pain-evoking potentials of dental treatment and type and severity of patients' disabilities altogether.

• Journal of the Korea Concrete Institute
• /
• v.14 no.3
• /
• pp.382-391
• /
• 2002

This study is devoted to the problems of thermal and shrinkage stresses in order to avoid cracking at early ages. The early-age damage induced by volume change has great influence on the long-term structural performance of the concrete structures such as its durability and serviceability To solve this complex problem, the computer programs for analysis of thermal and shrinkage stresses were developed. In these procedures, numerous material models are needed and the realistic numerical models have been developed and validated by comparison with relevant experimental results in order to solve practical problems. A framework has been established for formulation of material models and analysis with 3-D finite element method. After the analysis of the temperature, moisture and degree of hydration field in hardening concrete structure, the stress development is determined by incremental structural formulation derived from the principle of virtual work. In this study, the stress development is related to thermal and shrinkage deformation, and resulting stress relaxation due to the effect of early-age creep. From the experimental and numerical results it is found that the early-age creep p)ays important role in evaluating the accurate stress state. The developed analysis program can be efficiently utilized as a useful tool to evaluate the thermal and shrinkage stresses and to find measures for avoiding detrimental cracking of concrete structures at early ages.

• Spatial Information Research
• /
• v.9 no.2
• /
• pp.239-261
• /
• 2001

A large suite of official statistical data sets has been compiled for geographical units under the national directives, and it is the quantitative regional analysis procedures that could add values to them. This paper reports our attempts at prototyping a statistical GIS which is capable of serving over the Web a variety of regional analysis routines as well as value-added statistics and maps. A pilot database of some major statistical data was ingested for the city of Seoul. The baseline subset of regional analysis methods of practical usage was selected and accommodated into the business logic of the target system, which ranges from descriptive statistics, regional structure/inequality measures, spatial ANOVA, spatial (auto) correlation to regression and residual analysis. The leading-edge information technologies including the application server were adopted in the system design and implementation so that the database, analysis modules and analytic mapping components may cooperate seamlessly behind the Web front-end. The prototyped system supports tables, maps, and files of downloadable format for input and output of the analyses. One of the most salient features of out proposed system is that both the database and analysis modules are extensible via the bi-directional interface for end users; The system provides users with operators and parsers for algebraic formulae such that the stored statistical variables may be transformed and combined into the newly-derived set of variables. This functionality eventually leads to on-the-fly fabrication of user-defined regional analysis algorithms. The stored dataset may also be temporarily augmented by user-uploaded dataset; The extension of this form, in essence, results in a virtual database which awaits for users commands as usual. An initial evaluation of the proposed system confirms that the issues involving the usage and dissemination of information can be addressed with success.