• Korean Journal of Radiology
• /
• v.1 no.3
• /
• pp.135-141
• /
• 2000

Objective: To compare the clinical utility of the different imaging techniques used for the evaluation of tracheobronchial diseases. Materials and Methods: Forty-one patients with tracheobronchial diseases [tuberculosis (n = 18), bronchogenic carcinoma (n = 10), congenital abnormality (n = 3), post-operative stenosis (n = 2), and others (n = 8)] underwent chest radiography and spiral CT. Two sets of scan data were obtained: one from routine thick-section axial images and the other from thin-section axial images. Multiplanar reconstruction (MPR) and shaded surface display (SSD) images were obtained from thin-section data. Applying a 5-point scale, two observers compared chest radiography, routine CT, thin-section spiral CT, MPR and SSD imaging with regard to the detection, localization, extent, and characterization of a lesion, information on its relationship with adjacent structures, and overall information. Results: SSD images were the most informative with regard to the detection (3.95±0.31), localization (3.95±0.22) and extent of a lesion (3.85±0.42), and overall information (3.83±0.44), while thin-section spiral CT scans provided most information regarding its relationship with adjacent structures (3.56±0.50) and characterization of the lesion (3.51±0.61). Conclusion: SSD images and thin-section spiral CT scans can provide valuable information for the evaluation of tracheobronchial disease.

• Imaging Science in Dentistry
• /
• v.53 no.2
• /
• pp.137-144
• /
• 2023

Purpose: This study aimed to evaluate the anatomic circle around the impacted lower third molar to show, document, and correlate essential findings that should be included in the routine radiographic assessment protocol as clinically meaningful factors in overall case evaluation and treatment planning. Materials and Methods: Cone-beam computed tomographic images of impacted lower third molars were selected according to specific inclusion criteria. Impacted teeth were classified according to their position before assessment. The adjacent second molars were assessed for distal caries, distal bone loss, and root resorption. The fourth finding was the presence of a retromolar canal distal to the impaction. Communication with the dentist responsible for each case was done to determine whether these findings were detected or undetected by them before communication. Results: Statistically significant correlations were found between impaction position, distal bone loss, and detected distal caries associated with the adjacent second molar. The greatest percentage of undetected findings was found in the evaluation of distal bone status, followed by missed detection of the retromolar canal. Conclusion: The radiographic assessment protocol for impacted third molars should consider a step-by-step evaluation for second molars, and clinicians should be aware of the high prevalence of second molar affection in horizontal and mesioangular impactions. They also should search for the retromolar canal due to its associated clinical considerations.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.4
• /
• pp.537-542
• /
• 2023

Recently, deformation of operating railway structures has occurred due to adjacent excavation works such as new structures and utility tunnel expansion concentrated around downtown areas. However, most of them are focused on structural review, repair and reinforcement of structures. A review of the Track is insufficient. In particular, in the case of the gravel track on the earthwork subgrade, the subgrade and the ballast are not solidified. A slight level of deformation can cause ballast relaxation. Sleeper support conditions may lead to unstable conditions. Sufficient safety must be ensured. In addition, it is a track type with a high risk of train derailment due to unstable support conditions. In this study, the correlation between the deformation characteristics of gravel tracks and track support performance according to subgrade deformation is experimentally and analytically verified. In addition, an evaluation technique that can evaluate the condition of the gravel track and the track support stiffness is presented.

• Journal of Environmental Health Sciences
• /
• v.25 no.3
• /
• pp.94-102
• /
• 1999

To estimate the effects of environmental noise on inhabitants' life in an apartment area at Taejon, noise levels and traffic volume of major roads were measured. 203 housewives were surveyed by questionaires including general factors, noise related factors and three items of life effects: subjective evaluations on the general environment, annoyance, and life disturbance due to environmental noise. At the boundary adjacent to the road with more traffic volume, noise level was higher; according to the time, the amount of noise level was in the morning, in the evening, at noon, and at night in order. Most of boundary noise levels were higher than those of recommended standard environmental noise levels in a residential area. The boundary noise level showed a very significant linear relationship with traffic volume of near roads. Noise level difference in the apartments adjacent to three roads was ranged 2.4~6.7dB between in windows open and close state. The apartments adjacent to 9 lane or 6 lane-road, which were protected by noise prevention wall and 20m or more distance from the roads, showed higher noise level at middle floors and high floors than those of low floors; but the buildings adjacent to 4 lane-road, with no protection, showed higher noise level at low and middle floors than those of high floors. Among 203 housewives, 120(59.1%) participated in this study, and 86(73.2%) of them answered that the most serious environmental noise was traffic noise from near roads. Comparing traffic noise levels with those of before-migration, 67.0% participants found the environmental noise became louder. Fifty eight(49.5%) of the participants wanted noise protection wall and 15(25.9%) of them were willing to charge the fee. Less perception on the present noise comparing to those before-migration, less traffic volume, and lower noise levels in the apartments were related to higher scores of self-evaluation on the environment. Higher susceptibility on the present noise, areas with more traffic volume, higher boundary noise levels, and higher noise levels showed higher scores of annoyance on environmental noise and life disturbance. Considering above all things, it was suggested that traffic noise in this area was the major problem of environmental noise, and its' effect was so serious that inhabitants needed some preventive measures for better life quality.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.49 no.4
• /
• pp.442-452
• /
• 2022

The purpose of this study was to compare the mesio-distal and vertical position of impacted maxillary canines on panoramic radiographs with the labio-palatal position of impacted canines and root resorption of adjacent teeth on CBCT (Cone-Beam Computed Tomography). A total of 54 patients with 69 impacted maxillary canines were included in this study. On panoramic radiographs, the mesio-distal (Sector I - V), and vertical position, and angulation of impacted maxillary canines were evaluated. Labio-palatal position and root resorption of adjacent teeth were evaluated on CBCT. Labial impaction of canines was most frequent in panoramic sector I. Impaction within the arch was most frequent in sector I and II. Palatal impaction was most frequent in sector III, IV, and V. Mesially positioned canines on panoramic radiographs tended to be palatally impacted. Most of the root resorption of adjacent teeth occurred in sector III, IV, and V (p < 0.05). Canines with low angulation on panoramic radiographs tended to be palatally impacted and resorb the roots of adjacent teeth. The vertical position of impacted canines on panoramic radiographs was not statistically significant with respect to labio-palatal position and root resorption of adjacent teeth on CBCT. Analysis of the mesio-distal position and angulation of impacted maxillary canines on panoramic radiographs can be used to predict the labio-palatal position of impacted canines and root resorption of adjacent teeth.

• Journal of Ocean Engineering and Technology
• /
• v.14 no.2
• /
• pp.13-18
• /
• 2000

Recently due to the environmental pollution and the requirement for the substitute energy the interest for development of the solar energy system has been highly escalated It has been approved that the solar energy is a very useful on e because of purity and low cost. Some studies about the evaluation of solar radiation on the land has been carried out but few studies on the sea. This paper deals with a study on the evaluation of solar radiation on the sea. The experiments were carried out on the training vessel on the adjacent water of Korea Japan and China for twenty days. The distributions of solar radiation from the sea were changed into nonlinear in from according to the temperature. The solar radiation on the sea has a great influence on the velocity of wind as well as the temperature The distribuition of solar radiation has higher values on the track of the coastal sea than the open sea at same conditions.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.29 no.3
• /
• pp.207-213
• /
• 2009

This paper reports an effort to develop 3D tooth visualization system from CT sequence images as a part of the non-destructive evaluation suitable for the simulation of endodontics, orthodontics and other dental treatments. We focus on the segmentation and visualization for the individual tooth. In dental CT images teeth are touching the adjacent teeth or surrounded by the alveolar bones with similar intensity. We propose an improved level set method with shape prior to separate a tooth from other teeth as well as the alveolar bones. Reconstructed 3D model of individual tooth based on the segmentation results indicates that our technique is a very conducive tool for tooth visualization, evaluation and diagnosis. Some comparative visualization results validate the non-destructive function of our method.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.29 no.1
• /
• pp.100-112
• /
• 2001

The purpose of this study is to construct the evaluation criteria based on the relative importance and various combination of each evaluation index and then to evaluate urban biotope in terms of conservation of species and habitat. After the standard of evaluation had been developed through the literature review, the relative importance of the evaluation index through expert survey was found out, and the evaluation model of biotope value has been established. The results of this study are as follows; 1) We have constructed the nineteen evaluation criteria through literature reviews, and have provided relative importance to each evaluation index of the diversity of typical species in biotope, afforestation rate, stratification, Hemeroby grads, and the diversity of landscape patterns based on the results of expert survey. and then we have constructed the evaluation system using the relative importance criteria. 2) To evluate urban biotope using the evaluation system constructed, we selected 14 sites. The final evaluation results of each site is as follows; The III grade areas are Seohan and Hwasung high-rise apartment at Beummul-Dong, Korea Men Power /Agency in Sungs 대 industrial zone, the adjacent area of St. Tongil, and Hyomyung elementary school. The II grade areas are the farm land behind the third Anshim Jugong apartment, and Ehyun park. The I grade areas are swampy land in front of Kangchon and Anshim construction site, water space with semi-natural style in front of Gangchon Woobang apartment, forest zone near page Temple at mt. Palgong, the edge area of Jisan and Gosan, and the tendril yard against Anshim middle school. The only grade IV area is the commercial zone near Taegu Department 3) It is highly useful to evaluate urban biotope using the evaluation criteria constructed for this research, the evaluation criteria we developed may be difficult to guarantee the ability for reproduction and recovery, the appearance-number of the rare and endangered species are difficult to estimate urban biotopes. In the future, it is highly useful to evaluate biotope in terms of conservation of species and habitat through its valuation criteria developed in this research and it is necessary to develop the evaluation criteria applicable to estimation of biotope inventory and reproduction of biotope.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.30 no.3
• /
• pp.1-11
• /
• 2002

The purpose of this study is to construct an evaluation criteria based on the relative importance and various combinations of each evaluation index and then to appraise urban biotope in terms of nature experience and recreation. After the standard of evaluation had been developed through the review of existing literature, the relative importance of the evaluation index through expert survey was determined, and the evaluation model to assess biotope value was established. The results of this study are as follows; 1) We have constructed the seventeen evaluation criteria through literature reviews, and have provided relative importance to each evaluation index of the natural in biotope, the diversity of landscape patterns, the appearance-existence of water space, the special landscape elements, and the access based on the results of expert survey. and then we have constructed an evaluation system using the relative importance criteria. 2) To evaluate urban biotope using the evaluation system constructed, we selected 14 sites. The final evaluation results of each site is as follows; The first grade areas are the water space with semi-natural style in front of Gangchon Woobang apartments, the forest zone near Page Temple at Mt. Palgong, the edge area of Jisan and Gosan and the tendril yard against Anshim middle school. The second grade areas are Hyomyung elementary school, the farm land behind the third Anshim Jugong apartment, Ehyun put and the swampy land in front of the Kangchon and Anshim construction site. The third grade areas are Seohan and Hwasung high-rise apartments at Beummul-Dong, the Korea Manpower Agency in the Sungseo industrial zone, and the adjacent area of St. Tongil. The only fourth grade area is the commercial zone near Taegu Department Store. 3) It is highly useful to evaluate urban biotope using the evaluation criteria constructed for this research, the evaluation criteria we developed may be difficult to encompass all expert opinion and the period of space-formation is difficult to estimate urban biotopes. In the future, it is necessary to gather the basic data suitable to estimate biotope and it is necessary to develop detailed evaluation criteria applicable to estimate every biotope that has specific property.

• International Journal of CAD/CAM
• /
• v.6 no.1
• /
• pp.139-148
• /
• 2006

Catmull-Clark subdivision scheme provides a powerful method for building smooth and complex surfaces. But the number of faces in the uniformly refined meshes increases exponentially with respect to subdivision depth. Adaptive tessellation reduces the number of faces needed to yield a smooth approximation to the limit surface and, consequently, makes the rendering process more efficient. In this paper, we present a new adaptive tessellation method for general Catmull-Clark subdivision surfaces. Different from previous control mesh refinement based approaches, which generate approximate meshes that usually do not interpolate the limit surface, the new method is based on direct evaluation of the limit surface to generate an inscribed polyhedron of the limit surface. With explicit evaluation of general Catmull-Clark subdivision surfaces becoming available, the new adaptive tessellation method can precisely measure error for every point of the limit surface. Hence, it has complete control of the accuracy of the tessellation result. Cracks are avoided by using a recursive color marking process to ensure that adjacent patches or subpatches use the same limit surface points in the construction of the shared boundary. The new method performs limit surface evaluation only at points that are needed for the final rendering process. Therefore it is very fast and memory efficient. The new method is presented for the general Catmull-Clark subdivision scheme. But it can be used for any subdivision scheme that has an explicit evaluation method for its limit surface.