• Progress in Medical Physics
• /
• v.25 no.4
• /
• pp.233-241
• /
• 2014

The aim of this study is to develop a new software tool for 3D dose verification using $PRESAGE^{REU}$ Gel dosimeter. The tool included following functions: importing 3D doses from treatment planning systems (TPS), importing 3D optical density (OD), converting ODs to doses, 3D registration between two volumetric data by translational and rotational transformations, and evaluation with 3D gamma index. To acquire correlation between ODs and doses, CT images of a $PRESAGE^{REU}$ Gel with cylindrical shape was acquired, and a volumetric modulated arc therapy (VMAT) plan was designed to give radiation doses from 1 Gy to 6 Gy to six disk-shaped virtual targets along z-axis. After the VMAT plan was delivered to the targets, 3D OD data were reconstructed from 512 projection data from $Vista^{TM}$ optical CT scanner (Modus Medical Devices Inc, Canada) per every 2 hours after irradiation. A curve for converting ODs to doses was derived by comparing TPS dose profile to OD profile along z-axis, and the 3D OD data were converted to the absorbed doses using the curve. Supra-linearity was observed between doses and ODs, and the ODs were decayed about 60% per 24 hours depending on their magnitudes. Measured doses from the $PRESAGE^{REU}$ Gel were well agreed with the TPS doses at central region, but large under-doses were observed at peripheral region at the cylindrical geometry. Gamma passing rate for 3D doses was 70.36% under the gamma criteria of 3% of dose difference and 3 mm of distance to agreement. The low passing rate was resulted from the mismatching of the refractive index between the PRESAGE gel and oil bath in the optical CT scanner. In conclusion, the developed software was useful for 3D dose verification from PRESAGE gel dosimetry, but further improvement of the Gel dosimetry system were required.

• Journal of Korea Water Resources Association
• /
• v.53 no.9
• /
• pp.701-715
• /
• 2020

This study compared several reference evapotranspiration estimated using eight methods such as FAO-56 Penman-Monteith (FAO PM), Hamon, Hansen, Hargreaves-Samani, Jensen-Haise, Makkink, Priestley-Taylor, and Thornthwaite. In addition, by analyzing the monthly deviations of the results by the FAO PM and the remaining seven methods, monthly optimized correction coefficients were derived and the improvement effect was evaluated. These methods were applied to 73 automated synoptic observation system (ASOS) stations of the Korea Meteorological Administration, where the climatological data are available at least 20 years. As a result of evaluating the reference evapotranspiration by applying the default coefficients of each method, a large fluctuation happened depending on the method, and the Hansen method was relatively similar to FAO PM. However, the Hamon and Jensen-Haise methods showed more large values than other methods in summer, and the deviation from FAO PM method was also large significantly. When comparing based on the region, the comparison with FAO PM method provided that the reference evapotranspiration estimated by other methods was overestimated in most regions except for eastern coastal areas. Based on the deviation from the FAO PM method, the monthly correction coefficients were derived for each station. The monthly deviation average that ranged from -46 mm to +88 mm before correction was improved to -11 mm to +1 mm after correction, and the annual average deviation was also significantly reduced by correction from -393 mm to +354 mm (before correction) to -33 mm to +9 mm (after correction). In particular, Hamon, Hargreaves-Samani, and Thornthwaite methods using only temperature data also produced results that were not significantly different from FAO PM after correction. It can be also useful for forecasting long-term reference evapotranspiration using temperature data in climate change scenarios or predicting evapotranspiration using monthly or seasonal temperature forecasted values.

• 대한공업교육학회지
• /
• v.40 no.2
• /
• pp.111-129
• /
• 2015

This study tried to investigate the possibility and expectation effect to organize and operate NCS(national competency standards)-based vocational education curriculum in technical specialized high schools and meister high schools and the perceptions of specialty subject teachers about support plans for effective operation of the NCS-based curriculum. For this, the survey was conducted targeting 286 specialty subject teachers in technical specialized high schools and meister high schools. And the results are as follow: First, the specialty subject teachers in the technical specialized high schools and meister high schools recognized that the positive expectation effect can be obtained through the NCS-based vocational education curriculum and the NCS-based vocational education curriculum should very much be applied to the school curriculum but it is impractical to organize and operate the NCS-based vocational education curriculum as the school curriculum from 2016. Second, the specialty subject teachers in the technical specialized high schools and meister high schools recognized that industrial education needs can be analyzed, industry duties-based educational objectives and contents can be set up, industrial duties-based education can be done, the capability to develop and operate teachers' curriculum can be improved, and the NCS-based curriculum will be effective for industrial and academic cooperation and connection with communities by applying it but the realistic possibility will relatively be low. Third, the specialty subject teachers in the technical specialized high schools and meister high schools recognized that tools for practice should be reorganized and expanded, the number of students targeting practical classes should be reduced by 15 to 20 persons, teachers' field education capability should be strengthened, supply and demand of teachers should be supported, industrial and academic cooperation-based field-centered education should be reinforced, and support of the NCS-based teaching materials to be textbooks should be required in terms of operating schools to operate the NCS-based vocational curriculum effectively. Support of finding jobs and field education which correspond with the NCS-based vocational curriculum should be provided, field instruction by ability of the national competency standards should be supported, field practice education projects about the NCS-based vocational curriculum should be provided and introduction and operation of the industrial employee performance evaluation system should be required in terms of the support plans of relevant organizations.

• Korean Journal of Heritage: History & Science
• /
• v.54 no.3
• /
• pp.150-167
• /
• 2021

Since the advent of tertiary curriculum, middle school history education has been focused on political history, but many students perceive history as a simple memorization subject and complain about difficulties in abstract learning. The researcher saw this problem as caused by the history curriculum, and carried out this study for the purpose of proposing a revitalization of cultural property education in the middle school history curriculum. First, through the analysis of prior research, the usefulness of cultural property education, such as nurturing creative talent and realizing interactive history classes, was revealed, and the problems of the current political history-centered middle school history curriculum were pointed out. Afterwards, as a result of conducting an opinion survey on middle school 3rd grade students and social studies teachers, it was found that first, both middle school students and their teachers thought that the current political history-centered history had much room for improvement. Second, all groups agreed on the necessity of cultural property education in history education. However, in reality, it was found that it was not easy to sufficiently educate students about cultural property in a political history-centered curriculum. Third, teachers thought that it was necessary to improve the current history curriculum in order to enhance cultural property education. Based on these findings, the researcher suggested an improvement plan for the 2015 revised history curriculum. First, in the 'nature of the subject' section, cultural properties and historical materials should be included, and in the 'objective' section, politics, economy, society, and culture should be included. Contents related to cultural properties should be added to the sub-themes in the 'content system and achievement standards', and cultural properties-related contents should be further reinforced in the achievement standards, 'teaching, learning and evaluation'. It was suggested that this section should include cultural property learning and historical material learning, and guidance on teaching and learning methods of cultural property education should be added. If these aspects are reflected in the 2022 revised curriculum that is currently being developed, cultural property education will be improved, and more lively history education will be provided to students.

• Journal of Korea Water Resources Association
• /
• v.56 no.4
• /
• pp.235-243
• /
• 2023

Due to the revision of the River Act and the enactment of the Act on the Investigation, Planning, and Management of Water Resources, a regular bed change survey has become mandatory and a system is being prepared such that local governments can manage water resources in a planned manner. Since the topography of a bed cannot be measured directly, it is indirectly measured via contact-type depth measurements such as level survey or using an echo sounder, which features a low spatial resolution and does not allow continuous surveying owing to constraints in data acquisition. Therefore, a depth measurement method using remote sensing-LiDAR or hyperspectral imaging-has recently been developed, which allows a wider area survey than the contact-type method as it acquires hyperspectral images from a lightweight hyperspectral sensor mounted on a frequently operating drone and by applying the optimal bandwidth ratio search algorithm to estimate the depth. In the existing hyperspectral remote sensing technique, specific physical quantities are analyzed after matching the hyperspectral image acquired by the drone's path to the image of a surface unit. Previous studies focus primarily on the application of this technology to measure the bathymetry of sandy rivers, whereas bed materials are rarely evaluated. In this study, the existing hyperspectral image-based water depth estimation technique is applied to rivers with vegetation, whereas spatio-temporal hyperspectral imaging and cross-sectional hyperspectral imaging are performed for two cases in the same area before and after vegetation is removed. The result shows that the water depth estimation in the absence of vegetation is more accurate, and in the presence of vegetation, the water depth is estimated by recognizing the height of vegetation as the bottom. In addition, highly accurate water depth estimation is achieved not only in conventional cross-sectional hyperspectral imaging, but also in spatio-temporal hyperspectral imaging. As such, the possibility of monitoring bed fluctuations (water depth fluctuation) using spatio-temporal hyperspectral imaging is confirmed.

• Explosives and Blasting
• /
• v.30 no.2
• /
• pp.29-42
• /
• 2012

Variables influencing the free face movement due to rock blasting include the physical and mechanical properties, in particular the discontinuity characteristics, explosive type, charge weight, burden, blast-hole spacing, delay time between blast-holes or rows, stemming conditions. These variables also affects the blast vibration, air blast and size of fragmentation. For the design of surface blasting, the priority is given to the safety of nearby buildings. Therefore, blast vibration has to be controlled by analyzing the free face movement at the surface blasting sites and also blasting operation needs to be optimized to improve the fragmentation size. High-speed digital image analysis enables the analyses of the initial movement of free face of rock, stemming optimality, fragment trajectory, face movement direction and velocity as well as the optimal detonator initiation system. Even though The high-speed image analysis technique has been widely used in foreign countries, its applications can hardly be found in Korea. This thesis aims at carrying out a fundamental study for optimizing the blast design and evaluation using the high-speed digital image analysis. A series of experimentation were performed at two large surface blasting sites with the rock type of shale and granite, respectively. Emulsion and ANFO were the explosives used for the study. Based on the digital images analysis, displacement and velocity of the free face were scrutinized along with the analysis fragment size distribution. In addition, AUTODYN, 2-D FEM model, was applied to simulate detonation pressure, detonation velocity, response time for the initiation of the free face movement and face movement shape. The result show that regardless of the rock type, due to the displacement and the movement velocity have the maximum near the center of charged section the free face becomes curved like a bow. Compared with ANFO, the cases with Emulsion result in larger detonation pressure and velocity and faster reaction for the displacement initiation.

• Journal of Chest Surgery
• /
• v.36 no.9
• /
• pp.638-645
• /
• 2003

The purposes of this study were to evaluate the effect of myocardial protection with our cold blood cardioplegic solution and to observe the relationship between ultrastructural study and other evaluation methods and its effectiveness. Material and Method: We evaluated the changes of myocardial ultrastructure using semi-quantitative scoring system, CK-MB fraction, SGOT and LDH1/LDH2, and EKG in 18 patients undergoing valvular heart surgery and coronary artery bypass grafting (CABG). Right atrial auricular biopsies were taken before the cardiopulmonary bypass (CPB) and shortly after the end of CPB. Myocardium-related serum enzymes ＆ EKG were checked for 3 days of postoperative period and their postoperative peak enzyme value and observed new Q wave ＆ ST segment elevation in EKG were choosen. Result: There were 8 males and 10 females, and their mean age was 55.6$\pm$13. Eight patients underwent valvular heart surgery and ten coronary artery bypass grafting, The mean CPB time was 119$\pm$29 minutes and the mean aortic cross-clamp (ACC) time was 75.4$\pm$24 minutes. Before the start of CPB, the mean mitochondrial score was 4.28$\pm$0.53 and after the end of CPB, it significantly increased to 2.35$\pm$0.79. There was no evidence of perioperative myocardial infarction in terms of myocardiumrelated serum enzyme value and Q wave and ST change in EKG. There was no significant relationship between pre-CPB and post-CPB mitochondrial score and the mean time of CPB and ACC, and the mean value of postoperative peak CK-MB, SGOT and LDH1/LDH2, but there was relatively positive correlation of CPB time with peak LDH1/LDH2. Conclusion: Despite the apparent satisfactory results in myocardium-related serum enzymes ＆ EKG, with this study using the cold blood cardioplegic solution, there were many changes in myocardial ultrastructures, and more studies are needed to obtain further information.

• Journal of radiological science and technology
• /
• v.31 no.2
• /
• pp.109-114
• /
• 2008

There is a standard shoulder oblique method (Grashey method) available to view the shoulder joint. This method projects AP view of the shoulder joint so that the Humerus head's subuxation or joint degeneration can be easily visualized. However, in this view, the patients, with supine or sitting or erect position, have to keep their body obliquely. Whereas, the patients who are not well or operated, usually feel very uncomfortable to keep their body in this position and hence, we need other persons' help and much efforts will be needed to get the good quality shoulder joint view. Therefore, we thought of examining a method which shows the joint well by angling the tube to Medio-Lateral direction and without keeping the patients' one side upward in supine position. For this study, total 15 subjects with no history of neurological or psychiatric illness, were recruited for examinations. They consisted of 9 males and 6 females. Statistic group analysis was performed with ANOVA test. Scores of the evaluation of the experts were $1.10{\pm}0.54$ at $25^{\circ}$, $2.50{\pm}0.50$ at 30^{\circ}$, $2.85{\pm}0.36$ at $35^{\circ}$ and $2.33{\pm}0.47$ at $40^{\circ}$, respectively, and they were significant(p<0.05, Table 1). Joint space of the Humerus head and Scapula were well distinguished at $35^{\circ}$, $30^{\circ}$ and $40^{\circ}$ with the almost same score. However, the degree of distortion at $40^{\circ}$ was more severe than that at $30^{\circ}$. Ultimately, $30-35^{\circ}$ views were shown to yield good quality shoulder oblique images. In conclusion, this method may be very useful for the patients who are uncomfortable and for the emergency patients. In order to get similar or comparable view, the same X-tube angle is recommended to be used before and after the operation. Therefore, we hope that this new angled method seems to be efficient.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.15 no.2
• /
• pp.67-80
• /
• 2020

This study has been conducted at a time when Korean government continues to extend support for youth startups as part of its policy to create jobs and the focus moves from career and employment to youth startups with a growing interest in the field of youth startups. Against this background, this study aims to identify difficulty factors of youth startups in areas besides the Seoul Metropolitan Area, seek ways to overcome difficulty factors, and propose policy implications. To this end, this study set five criteria and 25 sub-criteria to evaluate the difficulties of youth startups by reviewing previous studies and conducting literature review, and performing brainstorming method. The empirical analysis of the evaluation criteria was performed, using the analytic hierarchy process (AHP) method, on youths aged 19 to 39 in Gunsan area. The analysis results showed that the largest difficulty factors facing local youths include business model establishment, business administration and management, and startup funding in the criteria. As for sub-criteria, the largest difficulty factors are market information acquisition, technology commercialization, project feasibility, technology development, and new market pioneering in descending order. Local youths have much difficulty about the process of turning a business item into a product and commercializing it. According to a comparative analysis by gender, men were a relatively high difficulty in commercializing business models than women. men were a relatively high difficulty in commercializing business models than women. On the other hand, women were higher than men in all factors (management management, entrepreneurship, improvement of entrepreneurship system, and improvement of entrepreneurship awareness) except for factors affecting business model. In addition, the factors of entrepreneurship were found to be relatively different among young people (college students, prospective entrepreneurs, entrepreneurs). In conclusion, it was suggested that in order to revitalize youth entrepreneurship in the region, it is necessary to actively resolve the difficulties of business model commercialization rather than entrepreneurship funds. In addition, it is necessary to strategically support customized entrepreneurship support and situational administrative services because gender and hierarchical difficulties are different than general solutions. This study presented practical priorities and derivation methods for the entrepreneurship difficulties faced by local youth, and suggested measures and improvements for vitalizing local youth entrepreneurship in the future.

• Journal of Food Hygiene and Safety
• /
• v.26 no.4
• /
• pp.308-314
• /
• 2011

This study surveyed and compared the temperatures established in display stands and food surfaces for cold and frozen foods in large discount stores in Korea. The temperatures established in display stands for cold food ranged with $3.5{\pm}1.8^{\circ}C$ as mean, minimum and maximum were $0^{\circ}C$ and $7^{\circ}C$. However, the surface temperatures of cold food on sale ranged with $10.7{\pm}2.9^{\circ}C$ as a mean, minimum $4.6^{\circ}C$ and maximum $18.4^{\circ}C$. Totally, the surface temperature of cold food on sale was $7.2^{\circ}C$, as a mean, higher than established in display stands for cold food in large discount stores in Korea. 53% of the surveyed cold foods were more than $10^{\circ}C$ in surface temperature and only 47% was less than $10^{\circ}C$. The differences between temperatures were lowest in fruits, salads and vegetables, but highest in milk products. On the other hand, the temperatures established in display stands for frozen food showed a range with $-20.7{\pm}1^{\circ}C$ as a mean. However, the surface temperatures of frozen food on sale showed a range with $-15.4{\pm}5^{\circ}C$ as a mean, minimum $-28^{\circ}C$ and maximum $-4.6^{\circ}C$ (included defrosting). The surface temperatures of frozen food, frozen meats, frozen processed foods and ice creams were $-13.8^{\circ}C$, $-15.9^{\circ}C$, and $-16.8^{\circ}C$, respectively. Only 32.3% of surveyed frozen foods showed less than $-18^{\circ}C$ in surface temperature. In conclusion, the temperatures established on cold and frozen food display stands were less than those of cold and frozen food surfaces on sale. There was also much variation in food surface temperatures during cold and frozen food storage and sales. Therefore, a temperature management system technology use at the distribution level for cold and frozen foods will be developed.