• 한국전기전자재료학회논문지
• /
• 제15권12호
• /
• pp.1054-1059
• /
• 2002

A great deal of research has been done in the field of characterization for piezoelectric thin films after the first report on the measurement for the piezoelectric coefficient of thin films in 1990. The main idea of this research is to provide a distinctive solution for the measurement and standardization of both the longitudinal and the transverse piezoelectric d-coefficients, d33 and d31, of ferroelectric thin films. In general, to get these two coefficients of thin films, two different measuring systems are required. Here, we propose the improved method for the evaluation of these two coefficients with single equipment and with the relatively convenient procedure. The two-step loading process of applying the both positive and the negative pressure has been introduced to acquire the piezoelectric coefficients. These results have been calibrated for both the longitudinal and 4he transverse piezoelectric d-coefficients, d33 and 431, of thin films by comparison with the virtual standard created from FEM. In this experiments, we have obtained d33 of 331pC/N and 031 of -92.2pC/N for the PZT thin films.

• The Journal of Advanced Prosthodontics
• /
• 제9권6호
• /
• pp.409-415
• /
• 2017

PURPOSE. Accurate information is essential in dentistry. The image information of missing teeth is used in optically based medical equipment in prosthodontic treatment. To evaluate oral scanners, the standardized model was examined from cases of image recognition errors of linear discriminant analysis (LDA), and a model that combines the variables with reference to ISO 12836:2015 was designed. MATERIALS AND METHODS. The basic model was fabricated by applying 4 factors to the tooth profile (chamfer, groove, curve, and square) and the bottom surface. Photo-type and video-type scanners were used to analyze 3D images after image capture. The scans were performed several times according to the prescribed sequence to distinguish the model from the one that did not form, and the results confirmed it to be the best. RESULTS. In the case of the initial basic model, a 3D shape could not be obtained by scanning even if several shots were taken. Subsequently, the recognition rate of the image was improved with every variable factor, and the difference depends on the tooth profile and the pattern of the floor surface. CONCLUSION. Based on the recognition error of the LDA, the recognition rate decreases when the model has a similar pattern. Therefore, to obtain the accurate 3D data, the difference of each class needs to be provided when developing a standardized model.

• 한국전자통신학회논문지
• /
• 제11권6호
• /
• pp.545-552
• /
• 2016

디지털 디스플레이를 통해서 다양한 콘텐츠와 메시지를 전달하는 디지털 사이니지가 국가의 미래형 전략산업으로 주목받고 있다. 특히, 국내 디지털 사이니지 산업은 세계 최고 수준의 디스플레이 산업과 유무선 네트워크를 기반으로 국제적인 경쟁력을 보유하고 있다는 평가를 받고 있다. 본 논문은 디지털 사이니지 산업의 현황을 산업계 및 표준화 동향, 기술 개발 현황 등에 대해서 상세히 기술하고 미래형 디지털 사이니지에 적용될 수 있는 초고화질 영상 및 사용자 인식 기술에 대해서도 분석하였다. 그리고 최근 지적된 디지털 사이니지 산업의 문제점과 이를 해결하기 위한 활성화 방안을 도출하여 제시하였다.

• 대한가정학회지
• /
• 제25권2호
• /
• pp.79-87
• /
• 1987

Paeksolgi is a typical Korean rice cake made by steaming rice powder added sugar, water and salt. This study attempted to clarify the factors which affect the textural characteristics, and to examine the effects of various steaming time and volume of adding water on sensory characteristics and Instron measurement on textures of Paeksolgi. Evaluation was conducted through sensory evaluation and objective evaluation. The results were summarized as follows. 1. In the preparation, the significant factors were soaking time, volume of sugar, and the interaction between soaking time and volume of adding water. And, Kind of sweetener, volume of adding water, steaming time, condition of powder, and the interaction between soaking time and steaming time, and between soaking time and volume of adding water, and between kind of sweetener and condition of powder, and between steaming time and volume of sugar were the significant factors which affected the textural characteristics of Paeksolgi. 2. In sensory evaluation on the various steaming time and volume of adding water, Paeksolgi made by steaming rice powder added water of 10% for 30 min. showed the most favorite tendency on the overall quality. The results of Instron measurement indicated that hardness, gumminess and chewiness tended to decrease as volume of adding water increased in same steaming time.

• 대한한방소아과학회지
• /
• 제20권2호
• /
• pp.147-175
• /
• 2006

Objective : This study is to investigate the method for assesment and diagnosis of ADHD, especially focusing on behavior rating scales. Methods : We searched the recent date of the publication and paper in ADHD. Results : For Assesment and Diagnosis of ADHD, various method such as interview with parents, child and teacher, behavior observation, behavior rating scales and neuropsychological test are used. The structured interview consists of the restrictive questions and response, and then have diagnostic algorithm, consequently can be used by untrained clinicians. Of the structured interview, standardization of K-SADS in Korean version is finished. Behavior rating scales, the form of parent, teacher and self-report questionnaires, are used as diagnosis and treatment evaluation of ADHD. Behavior rating scales consist of both ADHD-specific scales and broad-band scales designed to screen for various symptoms (including ADHD symptoms). ADHD-specific scales are useful in differential diagnosis, discrimination of subtype, treatment evaluation, However, broad-band scales are useful in preliminary examination. The neuropsychological tests can evaluate attention deficit and effect of attention deficit on cognitive function and academic performance. The neuropsychological tests also used in diagnosis and treatment evaluation of ADHD. Conclusion : For Assesment and Diagnosis of ADHD, various method are used, especially behavior rating scales are both useful and simple tool for diagnosis and treatment evaluation.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.1791-1797
• /
• 2010

The Urban Transit Standardization Program has been supported by the Ministry of Land, Transport and Maritime Affairs. The Program consists of dozen or more projects and thus is quite complex, which implies that the program success heavily depends upon the effective management of various artifacts during the development. Particularly, in the complex systems development, developing and managing requirements is very important throughout the whole system life cycle. The requirements can be the basis of the design changes to be made later as well as the test and evaluation to be performed in the subsequent stages of the systems development. As such, the derivation of the system's requirement based on the needs from the customers, or stakeholder in a broad sense must be done properly. In particular, notice that the system is being developed but the system requirements are not fully available for some reasons. To complement this situation is the purpose of the study. To derive proper requirements effectively in the process of development, this paper proposes to draw up scenario using the output of the system under development and to utilize the use case diagrams and operational scenarios.

• Safety and Health at Work
• /
• 제3권1호
• /
• pp.43-49
• /
• 2012

In recent years, various international organizations have raised awareness regarding psychosocial risks and work-related stress. European stakeholders have also taken action on these issues by producing important documents, such as position papers and government regulations, which are reviewed in this article. In particular, 4 European models that have been developed for the assessment and management of work-related stress are considered here. Although important advances have been made in the understanding of work-related stress, there are still gaps in the translation of this knowledge into effective practice at the enterprise level. There are additional problems regarding the methodology in the evaluation of work-related stress. The European models described in this article are based on holistic, global and participatory approaches, where the active role of and involvement of workers are always emphasized. The limitations of these models are in the lack of clarity on preventive intervention and, for two of them, the lack of instrument standardization for risk evaluation. The comparison among the European models to approach work-related stress, although with limitations and socio-cultural differences, offers the possibility for the development of a social dialogue that is important in defining the correct and practical methodology for work stress evaluation and prevention.

• 대한토목학회논문집
• /
• 제31권2D호
• /
• pp.315-322
• /
• 2011

정부는 대규모 사회간접자본시설에 대한 무분별한 추진을 막기 위해 사업의 타당성조사 뿐만 아니라 설계, 시공, 완공 시점에 사후평가를 실시하고 있다. 하지만 이러한 사후평가는 사전사후평가를 위한 평가항목과 분석방법이 모호하여 실효를 거두지 못하고 있다. 특히 철도사업은 철도사업의 종류와 철도의 종류에 따라 평가항목이 상이하여 사후평가항목과 분석절차가 차별화되어야 한다. 본 논문은 철도건설사업의 사후평가항목을 도출하고 데이터 수집 및 분석방법을 표준화하는 방안을 제시하고 있다. 구체적으로는 철도사업별로 공통평가항목과 특수평가항목을 도출하였고 이를 분석하는 방법으로 GIS기법을 제시하였다.

• 한국산업보건학회지
• /
• 제33권1호
• /
• pp.78-90
• /
• 2023

Objectives: The purpose of this study is to standardize the process code of the work environment measurement database (WEMD) for the construction of a job-exposure matrix (JEM). Methods: The standard process code (SPC) was reclassified based on process similarity and drawing upon the code used in the existing K2B. It was supplemented through review by industrial hygiene experts. In addition, an index word database related to SPC was created and used for SPC search. A pilot evaluation project was conducted by experts to evaluate the validity of the newly reclassified standard process code. Results: A total of 70 final SPCs were developed, including 31 processes related to the construction industry. Using the Shiny program, we developed a standard code finder that can be used on the web (https://kscf.shinyapps.io/scf_app/). As a result of the pilot evaluation, it was determined that it was easier to search for standard codes than previous codes, so it was highly utilized. Conclusions: It is expected that JEM construction using industry-process information drawing on WEMD data will be possible using the 70 newly standardized process codes.

• 자동차안전학회지
• /
• 제15권2호
• /
• pp.6-12
• /
• 2023

For the commercialization and standardization of autonomous vehicles, demand for rigorous safety criteria has been increased over the world. In Korea, the number of extraordinary service permission for automated vehicles has risen since Hyundai Motor Company got its initial license in March 2016. Nevertheless, licensing standards and evaluation factors are still insufficient for operating on public roadways. To assure driving safety, it is significant to verify whether or not the vehicle's decision is similar to human driving. This paper validates the safety of the autonomous vehicle by drawing scenario-based comparisons between manual driving and autonomous driving. In consideration of real traffic situations and safety priority, seven scenarios were chosen and classified into basic and advanced scenarios. All scenarios and safety factors are constructed based on existing ADAS requirements and investigated via a computer simulation and actual experiment. The input data was collected by an experimental vehicle test on the SNU FMTC test track located at Siheung. Then the offline simulation was conducted to verify the output was appropriate and comparable to the manual driving data.