• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.23 no.2
• /
• pp.17-31
• /
• 2020

In the field of environmental landscape architecture, the internet medium is used as an effective communication tool not only in the private level but also in the policy level. Recently, the active utilization of mobile web service is emphasized as the time changes, but there is not much improvement or advance in services due to lack of relevant studies. Therefore, this study is intended to provide basic data needed for improvement and advance by researching the quality of mobile web service among multichannel services provided in environmental landscape architecture related internet media. The model for measuring service quality is SERVQUAL, which was verified in the study of Choi(2015), Choi and Koo(2016), and the final valid samples are total 230. First, the subjects were analyzed as the representative media that are possible to acquire comprehensive knowledge related to environmental landscape architecture. Second, the highest importance level in each subsection was 'protection and security maintenance of customer information' followed by 'Reliability about accurate information supply'. Regarding performance level, 'Reliability about accurate information supply' and 'professional knowledge to communicate with users' are highly evaluated. Third, regarding Importance-Performance Analysis(IPA), the first priority management should is 'Tangibles', and the next are 'Responsibility' and 'Empathy'. The ones for maintenance of the status quo are 'Reliability' and 'Assurance', and there is none for effort reduction. Meanwhile, regarding the importance of each factor and difference in the quality of PC web service and mobile web service studied before, the biggest difference is in 'Tangibles', followed by 'Assurance', 'Empathy', 'Responsibility' and 'Reliability'. It is suggested that the revitalization of Landscape information science(LB1106) presented in the National Science&Technology Standard Classification System is needed. In the future, it is necessary to research the change trend on users' response through continuous evaluation of improved mobile web service.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.3 no.3
• /
• pp.213-229
• /
• 2005

Nuclides in radioactive wastes are assumed to be transported in the geosphere by groundwater and probably discharged into the biosphere. Quantitative evaluation of doses to human beings due to nuclide transport in the geosphere and through the various pathways in the biosphere is the final step of safety assessment of the radioactive waste repository. To calculate the flux to dose conversion factors (DCFs) for nuclides appearing at GBIs with their decay chains, a template ACBIO which is an AMBER case file based on mathematical model for the mass transfer coefficients between the compartments has been developed considering material balance among the compartments in biosphere and then implementing to AMBER, a general and flexible software tool that allows to build dynamic compartment models. An illustrative calculation with ACBIO is shown.

• Journal of Microbiology and Biotechnology
• /
• v.19 no.9
• /
• pp.1070-1076
• /
• 2009

Telomerase reverse transcriptase (TERT), which prolongs the replicative life span of cells, is highly upregulated in 85-90% of human cancers, whereas most normal somatic tissues in humans express limited levels of the telomerase activity. Therefore, TERT has been a potential target for anticancer therapy. Recently, we described a new approach to human cancer gene therapy, which is based on the group I intron of Tetrahymena thermophila. This ribozyme can specifically mediate RNA replacement of human TERT (hTERT) transcript with a new transcript harboring anticancer activity through a trans-splicing reaction, resulting in selective regression of hTERT-positive cancer cells. However, to validate the therapeutic potential of the ribozyme in animal models, ribozymes targeting inherent transcripts of the animal should be developed. In this study, we developed a Tetrahymena-based trans-splicing ribozyme that can specifically target and replace the mouse TERT (mTERT) RNA. This ribozyme can trigger transgene activity not only also in mTERT-expressing cells but hTERT-positive cancer cells. Importantly, the ribozyme could selectively induce activity of the suicide gene, a herpes simplex virus thymidine kinase gene, in cancer cells expressing the TERT RNA and thereby specifically hamper the survival of these cells when treated with ganciclovir. The mTERT-targeting ribozyme will be useful for evaluation of the RNA replacement approach as a cancer gene therapeutic tool in the mouse model with syngeneic tumors.

• The Korean Journal of Physiology and Pharmacology
• /
• v.21 no.1
• /
• pp.107-115
• /
• 2017

Over the last decade, physiologically based pharmacokinetics (PBPK) application has been extended significantly not only to predicting preclinical/human PK but also to evaluating the drug-drug interaction (DDI) liability at the drug discovery or development stage. Herein, we describe a case study to illustrate the use of PBPK approach in predicting human PK as well as DDI using in silico, in vivo and in vitro derived parameters. This case was composed of five steps such as: simulation, verification, understanding of parameter sensitivity, optimization of the parameter and final evaluation. Caffeine and ciprofloxacin were used as tool compounds to demonstrate the "fit for purpose" application of PBPK modeling and simulation for this study. Compared to caffeine, the PBPK modeling for ciprofloxacin was challenging due to several factors including solubility, permeability, clearance and tissue distribution etc. Therefore, intensive parameter sensitivity analysis (PSA) was conducted to optimize the PBPK model for ciprofloxacin. Overall, the increase in $C_{max}$ of caffeine by ciprofloxacin was not significant. However, the increase in AUC was observed and was proportional to the administered dose of ciprofloxacin. The predicted DDI and PK results were comparable to observed clinical data published in the literatures. This approach would be helpful in identifying potential key factors that could lead to significant impact on PBPK modeling and simulation for challenging compounds.

• Journal of Nutrition and Health
• /
• v.36 no.5
• /
• pp.515-527
• /
• 2003

Objectives： A meta-analysis of the literatures was conducted to evaluate the cost-effectiveness of medical nutrition therapy by dietitians. Methods : The 30 studies were identified from a computerized search of published research on MEDLINE, Science-Direct and the PQD database until May, 2002 and a review of reference lists. The main search terms were“dietitian”,“dietary intervention”,“nutrition intervention”, “cost”,“cost-effectiveness”and“cost-benefit analysis”. The subgroup analysis was performed by publication year, study design, intervention provider, type of patient (in/out-patient) and type of cost (total cost/direct cost). Two reviewers independently selected trials for inclusion, assessed the quality and extracted the data. Results : The 30 studies were identified using the electric database search and bibliographies. The 17 trials were eligible for inclusion criteria, then the systematic review and a meta-analysis were conducted on effectiveness and cost-effectiveness of medical nutrition therapy. The quality of the studies was evaluated using the quality assessment tool for observational studies. The quality score was 0.515 $\pm$ 0.121 (range : 0.279-0.711, median : 0.466). The meta-analysis of 17 studies based on the random effect model showed that medical nutrition therapy was highly effective in treating the diseases (effect size 0.3092 : 95% confidence interval 0.2282-0.3303). The vote-counting method, one of meta-analysis methods, was applied to evaluate the cost-effectiveness of medical nutrition therapy conducted by dietitians. Two criteria (method 1, method 2) for voting were used. The calculated p-values for method 1 (more conservative method) and method 2 (less conservative method) were 0.1250 and 0.0106, respectively. Medical nutrition therapy by dietitians was significantly cost-effective in the method 2. Conclusion. This meta-analysis showed that the effectiveness of medical nutrition therapy was statistically significant in treating disease (effect size 0.3092), and that the cost-effectiveness of medical nutrition therapy was statistically significant in the method 2 (less conservative method) of vote counting. (Korean J Nutrition 36(5): 515~527, 2003)

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.6
• /
• pp.1589-1600
• /
• 1997

The construction of optical access network costs upper 40% in total installation cost of total optical network. Optimization of access network therefore is core in optical network. Advanced countries include EU, Japan and USA already have researched access network. This paper presents analysis of three broad-band fiber-optics subscriber loop architectures(HFC, ATM-PON, Super PON). The analyses focus on the specific demonstrated architectures and use component cost projections to estimate future network costs on a per-subscriber basis. We use TITAN(Tool for Introduction Scenarios and Techno-Economic Evaluation of The Access Network) model. We find that ATM-PON can deliver voice and ISDN data at installed first costs than the other architectures. This is due to the sharing bandwidth among a cluster of subscribers within Curb. This work intends to support establishing guidelines for strategic decisions regarding the development of the access network alternatives of different operators.

• Journal of Korean Academy of Nursing
• /
• v.41 no.6
• /
• pp.814-820
• /
• 2011

Purpose: This study was performed to compare the effects of standardized peristomal skin care (SPSC) and crusting technique (CT) on the peristomal skin of ostomates. SPSC was developed by a consensus among the expert group based on a comprehensive review of the relevant literature and hospital protocols. Methods: A randomized controlled pilot trial with 2 parallel arms was used. A total of 81 ostomates, who were recruited from a tertiary hospital, completed the baseline, 1-month, 2-month, and 3-month follow-up (SPSC group, n=45; CT group, n=36). SPSC consisted of water cleansing and direct application of ostomy appliances. CT involved crusting hydrocolloid powder and patting with water sponge or protective barrier liquid film. The outcomes of the study were assessed by skin problems, such as discoloration, erosion and tissue overgrowth; the domains of the evaluation tool used in examining the peristomal skin. A generalized estimating equation model was used to examine the effects according to time and group. Results: In both SPSC and CT groups, the likelihood of occurrence of discoloration (OR, 1.99; 95% CI, 1.61-2.46), erosion (OR, 1.87; 95% CI, 1.55-2.25) and tissue enlargement (OR, 1.94; 95% CI, 1.36-2.77) increased with time. There was no significant difference in discoloration between the groups, whereas the probability of erosion (OR, 0.38; 95% CI, 0.16-0.89) and tissue overgrowth (OR, 0.09; 95% CI, 0.02-0.55) was lower in the SPSC group than in CT group. Conclusion: SPSC was sufficient in preventing peristomal skin problems of ostomates compared to the CT.

• Journal of Korea Port Economic Association
• /
• v.26 no.3
• /
• pp.165-174
• /
• 2010

DEA converts multiple inputs and outputs of a decision unit into a single measure of performance, generally mentioned as relative efficiency. DEA has been applied successfully as a performance evaluation tool in many fields including manufacturing, banks, pharmacies, and hospitals to name a few. This paper applies the input-oriented DEA model, DEA/Window analysis, and Malmquist indices to the 9 regions in Korea to measure the efficiency and productivity. The empirical results show the following findings. First, the super efficiency indicate that efficiency of Group 2 is greater than Group 1. Second, Malmquist indices show that productivity of Group 2 is less than Group 1. Third, DEA/Window of Group2 show that Chungnam is most stable, while Jeonnam is most unstable.

• Computers and Concrete
• /
• v.22 no.1
• /
• pp.27-37
• /
• 2018

Reinforced concrete structures are widely used in civil engineering projects around the world in different designs. Due to the great evolution in computational equipment and numerical methods, structural analysis has become more and more reliable, and in turn more closely approximates reality. Thus among the many numerical methods used to carry out these types of analyses, the finite element method has been highlighted as an optimized tool option, combined with the non-linear and linear analysis techniques of structures. In this paper, the behavior of reinforced concrete beams was analyzed in two different configurations: i) with welding and ii) conventionally lashed stirrups using annealed wire. The structures were subjected to normal and tangential forces up to the limit of their bending resistance capacities to observe the cracking process and growth of the concrete structure. This study was undertaken to evaluate the effectiveness of welded wire fabric as shear reinforcement in concrete prismatic beams under static loading conditions. Experimental analysis was carried out in order compare the maximum load of both configurations, the experimental load-time profile applied in the first configuration was used to reproduce the same loading conditions in the numerical simulations. Thus, comparisons between the numerical and experimental results of the welded frame beam show that the proposed model can estimate the concrete strength and failure behavior accurately.

• Journal of Energy Engineering
• /
• v.5 no.1
• /
• pp.8-18
• /
• 1996

As a part of comprehensive IGCC process simulation, the thermal performance analysis was performed for coal gas firing combined power plant. The combined cycle analyzed consisted of il Texaco gasifier and a low temperature gas cleanup system for the gasification block and a GE 7FA gas turbine, a HRSG and steam turbine for the power block. A steady state simulator called ASPEN(Advanced System for Process Engineering) code was used to simulate IGCC processes. Composed IGCC configuration included air integration between ASU and gas turbine and steam integration between gasifier, gas clean up and steam turbine. The results showed 20% increase in terms of gas turbine power output(MWe) comparing with natural gas case based on same heat input. The results were compared with other study results which Bechtel Canada Inc. performed for Nova Scotia power plant in 1991 and the consistency was identified within two studies. As a result, the analysing method used in this study is verified as a sound tool for commercial IGCC process evaluation.