• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1994.10a
• /
• pp.683-688
• /
• 1994

Recently, the Z-Map model has been used widely to represent the three dimensional geometric shape and to achieve the cross-section and point evaluation of the shape. In this paper, the CNC cutting planning and simulation modules for product with three dimensional geometric shape are realized based on the Z-Map model. The realized system has the various capabilities related to the automatic generation of tool path for the rough and finish cutting processes, the automatic elimination of overcut, the automatic generation of CNC program for a machining center and the cutting simulation. Especially, the overcut-free tool path is obtained by using the CL Z-Map models which are composed of the offset surfaces of the geometric shape of product.

• Journal of the Korean Solar Energy Society
• /
• v.23 no.1
• /
• pp.57-67
• /
• 2003

This study aims to presents Evaluation Method of Green Remodeling that analyze the value of environment through expense, using the method of life cycle cost and life cycle assessment simultaneously. The results of this study are summarized as follows. Evaluation Model developed in this study can convert economical value of environment into cost by integrating. In addition, the model can apply as a useful tool to estimation of economical design alternative as well as quantification of environmental loads and costs. Evaluation Model presented In this study observe energy consumption and the environmental load emission with qualification, it can forecast effect of environmental cost that cost estimation is expected to be added to energy cost rate by being possible. Synthetically, when Estimation Model and computer program that developed in this study is applies to the construction industry; reasonable management of environmental load is convenient at each step of Green Remodeling. In addition, at preliminary design phase, practical use may be possible by reasonable yardstick about various alternatives and improvement of design alternatives likewise by grasping environmental effect.

• Journal of Korean Institute of Industrial Engineers
• /
• v.28 no.2
• /
• pp.216-222
• /
• 2002

The ergonomic human model can be considered as a tool for the evaluation of ergonomic factors in vehicle design process. The proper anthropometric data on driver's postures are needed in order to apply a human model to vehicle design. Although studies on driver's posture have been carried out for the last few decades, there are still some problems for the posture data to be applied directly to the human model due to the lack of fitness because such studies were not carried out under the conditions for the human model application. In the traditional researches, the joint angles were evaluated by the categorized data, which are not appropriate for the human model application because it is so extensive that it can not explain the posture evaluation data in detail. And the human models require whole-body posture evaluation data rather than joint evaluation data. In this study a postural evaluation function was developed not by category data but by the concept of the loss function in quality engineering. The loss was defined as the discomfort in driver's posture and measured by the magnitude estimation technique in the experiment using a seating buck. Four loss functions for the each joint - knee, hip, shoulder, and elbow were developed and a whole-body postural evaluation function was constructed by the regression analysis using these loss functions as independent factors. The developed postural evaluation function shows a good prediction power for the driver's posture discomfort in validation test. It is expected that the driver's postural evaluation function based on the loss function can be used in the human model application to the vehicle design process.

• The Journal of the Korea Contents Association
• /
• v.6 no.9
• /
• pp.42-49
• /
• 2006

In this paper, we proposed a model to evaluate confidence and satisfaction of health information web-sites visited by general health consumers. In order to propose the evaluation model, lots of foreign and domestic researches are investigated and analyzed. Based on these analyses, confidence and satisfaction standards for the model are proposed. A process for evaluation and a method for calculation of evaluation value by the standards are proposed, too. The proposed model can be utilized as a tool for analyzing conventional health information web-sites and can be utilized as check lists for developments in case of health information web-sites under construction.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.15 no.5
• /
• pp.72-78
• /
• 2006

The paper proposes reference model error feedback control scheme for motion control system with hard non-linear components as like saturation and dead-zone in plant input part. Additionally, the plant has the system uncertainty effected by plant model parameter deviation and disturbance. The control algorithm uses the reference model to apply additional feedback loop with the error between reference model output and actual output effected by disturbance and non-linear components. And the stability evaluation based on Popov stability and controller design method are formulated to be performed. The effectiveness of the proposed scheme is examined by simulations. The results are proven by reasonable performances following reference model responses with good disturbance rejection performance without over-tuning of controller.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.207.1-207.1
• /
• 2011

The performance of a francis turbine is studied by applying a new performance evaluation tester. the performance of a francis turbine is predicted under several operating conditions and the prediction results are compared with model test data. As a result, it is demonstrated that the present method can predict the performance of a francis turbine with high accuracy and has usefullness as an engineering tool on the performance of hydraulic turbines.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.5
• /
• pp.115-121
• /
• 1996

Recently, the Z-Map model has been used widely to represent the three dimensional geometric shape and to achieve the cross-section and point evaluation of the shape. In this paper, the CNC cutting planning and simulation modules for product with three dimensional geometric shape are realized based on the Z-Map model. The realized system has the various capabilities related to the automatic generation of tool path for the rough and finish cutting processes, the automatic elimination of overcut, the automatic generation of CNC program for a machining center and the cutting simulation. Especially, the overcut-free tool path is obtained by using the CL Z-Map models which are composed of the offset surfaces of the geometric shape of product.

• Journal of The Korean Association of Information Education
• /
• v.24 no.4
• /
• pp.379-390
• /
• 2020

Recently, interest in online teaching·learning and evaluation tools has increased in the context of Covid-19. In order to use tools effectively, it is necessary to identify the structural influence and causal relationship between the learner's affective and cognitive variables. In this study, to identify a causal relationship between motivation and thinking while using online judge, research and competing model were established and model fit/path analysis were performed. It was found that there was a linear causal relationship from tool usage, self-efficacy, flow, logical thinking, to computational thinking. It was confirmed that 'self-efficacy → flow', or 'flow' had mediating effect on the path from tool usage to thinking, and tool usage was not exerted to thinking through 'flow → self-efficacy'. The causality of 'logical thinking → computational thinking' was identified on the path where tool usage affects thinking ability through learning motivation, but the causality of 'computational thinking → logical thinking' was not identified.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.33 no.3
• /
• pp.79-86
• /
• 2010

Causing by economic stagnation and financial management difficulty of the domestic small and medium business company, the actual condition which enlarges the plan of politic funds increased from the government. The government authority as the SBC (small and medium business promotion corporation) evaluates the domestic small and medium business company, and directly executes a governmental politic funds. Financial analysis is a important factor of enterprise evaluation among various valuation bases. However because of applying to the whole domestic manufacturing industry on financial evaluation, Current financial evaluation index effectively cannot reflect the feature of a regional industry. A whole manufacturing industry index considers a standard for the comparison evaluation of domestic manufacturing industry and compares with the other industries and the world-wide nation industry change, But, there is a difference from indexes of corresponding industry in specific regions. This paper proposes a model of evaluation index for the efficient execution of politic funds. We considers three manufacturing industries for proposed model which are shipbuilding, machine tool and airline industries in Gyeongsangnam-do region.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.19 no.5
• /
• pp.596-602
• /
• 2010

In this study, a fmite element model was developed for analysis of feeding a structure in open loop control The finite element analysis (FEA) can simulate dynamic behavior of the structure of a machine tool rapidly traveling with a screw feeding driving system. The feeding mechanism was implemented with screw element of the FEA tool used in this study. The procedure was developed for the dynamic transient FEA. First, motion parameters such as jerk and velocity were introduced for the structure to be fed in open loop control When its traveling distance was determined, set-points for the distance were generated based on the motion parameters. The set-points were applied to the FE model constructed for the traveling structure. The FEA was executed and evaluated. In this study, the FEA procedure was applied to the column of a machine tool and the dynamic behavior of the column was evaluated. The FEA helps in evaluation of the motion characteristics of a structure. The convergence time of the structure vibration posterior to feeding termination can be estimated and the stiffness of the flexible structure is also evaluated against jerk, and acceleration. It provides the feeding force which is helpful in selection of the feeding motor.