• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.11b
• /
• pp.910-915
• /
• 2001

For the environmental noises has various frequency spectrums and fluctuation characteristics. the dimensions of psychological influencing on persons IS also complex. Analyzing this complex-dimensional psychological factors and characteristics of them then developing the evaluation indexes which have a good correspondence are important for improvement of noise environment. To develop the effective evaluation procedures which reflect the psychological respects of persons, this study firstly we drove the psychological factors and classified the noises into several groups by their psychological response characteristics through the psycho-acoustical experiments using environmental noises. In addition, we analyzed the relationship between the various evaluation indexes, psychological factors and the noise groups, and then suggested several indexes for the simple and efficient psycho-acoustic evaluation.

• International conference on construction engineering and project management
• /
• 2009.05a
• /
• pp.1195-1200
• /
• 2009

Two important concepts in VE are "function" and "cost." Cost can be expressed quantitatively. Unlike cost, the function can only be expressed qualitatively. Thus, to accurately evaluate the performance in VE analysis, it is required that the functional aspect should be considered a qualitative one. This study suggests a procedure of function oriented evaluation which can evaluate function enhancement of a VE proposal more logically and objectively. To conduct this study, problems were induced via case analysis, and solutions were found. In addition, the existing simple evaluation procedures were corrected, and a function enhancement evaluation procedure via function classification was suggested. For function classification, the use of the concepts, which were "intended function" and "additionally obtained function," was suggested. Function oriented evaluation procedure to VE proposals which is suggested in this study is expected to be a great help in treating valuable functions through VE job plan.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.15 no.2
• /
• pp.19-30
• /
• 2019

In this study, to evaluate conservatism of various fatigue life evaluation procedures, fatigue tests were conducted using compact tension (CT) specimens with a round notch, made of A516 Gr.70 carbon steel and A240 TP304 stainless steel, under load-controlled cyclic condition. Experimental fatigue failure cycles were measured and compared with predicted fatigue lives using two different life evaluation methods; (1) Design-By-Analysis (DBA) procedure given in ASME B&PV Code, Sec. III, Div. 1, Subsec. NB-3200 and (2) structural stress-based approach provided in ASME B&PV Code, Sec. VIII, Div. 2, Part 5. To predict fatigue failure cycles, three-dimensional elastic finite element analysis was conducted. Fatigue lives were predicted by both design fatigue curve given in ASME B&PV Code, Sec. III, Div. 1, Appendices and best-fit fatigue curve suggested in NUREG/CR-6815 for the DBA procedure. Finally, fatigue lives evaluated by various methods were compared with test results, and then conservatism between each evaluation procedure was discussed.

• Journal of Periodontal and Implant Science
• /
• v.27 no.3
• /
• pp.575-584
• /
• 1997

The quality of periodontal instrument cutting edge is a basic element of effective root planing procedure. Using instruments, the sharp edge is changed into blunt or beveled edge. With the blunt instrument, the periodontal treatment can't be carried into accuracy and effective. The study on the wear of periodontal curet is insufficient, there are few publications about the change of sharpness of cutting egde after using instrument and a certen reports were published on the study of scanning electron microscope(SEM) examination. In this study, to declare the number of strokes for sharpening of instruments, the changes of cutting edge is measured by the clinical methods, tactile sensitivity examination and refraction light-white line test after scaling strokes and root planing strokes. SEM test was added for defined the changes of cutting edges. The 7/8 Gracey curets that have been never used was tested. Maxillary molars which were extracted from the School of Dental Medicine, Dankook University was used. Subjected teeth had attachment loss more than 6 mm in bucca-lingual surface and sufficient calculus of a band type in cervical area. The strokes of curet were executed 3, 5, 7, 9, 11, 13 times on scaling stroke and 10, 15, 20, 25, 30, 35 times on root planing stroke. A resident has periodontal experience over 3 years carried out the clinical examinations those tactile sensitivity examination and refraction light-white line test 5 times. The case there being tactile sensitivity certenly is 2, the case being felt tactile sensitivity is 1, and the case there not being tactile sensitivity is 0. The visual examination was recorded as following. The case that refracted white line is not recognised is 2, the case that uncerten is 1, and the case that acknowledged is 0. The results were obtained as follows. 1. After scaling strokes, the tactile sensitivity was reduced after 11 strokes and disappeared in 13 strokes. 2. In tactile sensitivity after root planing procedures, sensitivity was reduced after 25 strokes and disappeared in 35 strokes. 3. In case of visual examination, the detection of refracted white line was increased after 9 strokes of scaling procedures and the accuracy of wear wasn't showed after root planing procedures. 4. In SEM, metal projection was observed on new periodontal curet cutting edge and it was disappeared after scaling procedures. 5. In SEM, the cutting edge was showed changing linear into an aspect of the surface after 5 strokes of scaling procedures and 10 strokes of root planing procedures and showed beveled edge in 11 strokes of scaling procedures, 25 strokes of root planing procedures. The results of 3-type examination indicated that the sharpening of curet should be performed after 11 strokes of scaling procedures and 25 strokes of root planing procedures.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2000.10a
• /
• pp.233-238
• /
• 2000

The purpose of this study is to outline the analysis procedure for evaluating the performance of moment resisting steel frames. For this purpose, three ordinary moment resisting frames are designed in compliance to UBC 1994. The evaluation is performed by nonlinear static procedures using two analytical models. Only one analytical model using panel element can reflect the panel zone deformation explicitly. The limit values in FEMA 273 are used as guidelines of predicted demand parameters by which the performance of OMRFs may be assessed.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2005.11a
• /
• pp.109-112
• /
• 2005

In this paper described is the basic concept of the Guideline for Post-earthquake Damage Assessment of RC buildings, revised in 2001, in Japan. This paper discusses the damage rating procedures based on the residual seismic capacity index R, the ratio of residual seismic capacity to the original capacity, that is consistent with the Japanese Standard for Seismic Evaluation of Existing RC Buildings, and their validity through calibration with observed damage due to the 1995 Hyogoken-Nambu (Kobe) earthquake. Good agreement between the residual seismic capacity ratio and damage levels was observed.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 1998.10a
• /
• pp.345-352
• /
• 1998

Free-field ground motion during earthquake is significantly affected by the local site conditions and the behavior of structure is influenced by ground motion, it is essential to perform the reliable site characterization and to determine the site specific earthquake response. In this study, case study of site specific ground response evaluation was performed at Inchon area. Step by step procedures for site characterization and one-dimensional site response analysis were introduced and the importance of site specific analysis was verified.

• Proceedings of the Korean Information Science Society Conference
• /
• 2003.10a
• /
• pp.892-894
• /
• 2003

IT 시스템 평가과정은 시스템의 보안기능과 이에 적용된 보증수단이 요구사항들을 만족하는지에 대한 신뢰도를 확인하는 것이며, 평가결과는 소비자가 IT 제품이나 시스템이 주어진 환경에 적용하기에 충분히 안전한지, 사용상 내재하는 보안위험이 허용가능한지를 결정하는데 도움이 될 수 있다. 평가를 통하여 평가보증등급(EAL： Evaluation Assurance Level) 3 이상으로 인증받기 위해서는 ALC_DVS. 1 컴포넌트의 요구사항을 만족하여야 하며, 이들 요구사항은 개발현장에 대한 실사를 요구하게 된다. 본 논문에서는 ALC_DVS. 1 컴포넌트에서 요구하는 현장 실사의 중요성을 파악하고, 국내에 적용가능한 ALC_DVS. 1 컴포넌트 패밀리를 제안하고 실사 준비에 필요한 절차를 도출하였다.

• Journal of Engineering Education Research
• /
• v.17 no.1
• /
• pp.42-49
• /
• 2014

The main purposes of this study was to develop evaluation model, which provides program educational objectives(PEO) evaluation research with guidances on how to evaluate the program educational objectives and procedures in order to enhance the quality of engineering education. Educational objective evaluation is reciprocal processes that depend on and affect one another. Thus, the evaluation component deals with how to identify members' strengths, weakness, and needs, how to assess and improve the effectiveness of curriculum programs, and how to provide data that assist in decision making. After literature reviews about the case studies on the program educational objectives evaluation, this study, to understand the meaning of education evaluation and the engineering accreditation, and then, examined the evaluation model for program educational objectives. This study suggested evaluation components of program educational objectives. In particular, the distinctions between diagnostic, formative, and summative evaluation are discussed. The result of this study is significant in terms of guiding the future evaluation model development for program educational objectives.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.421-424
• /
• 2007

Currently domestic criteria for the aircraft noise is being adapted WECPNL(weighted equivalent continuous perceived noise level), while internationally preferred method is $L_{dn}$ which is based on from $L_{eq}$ and can also evaluate environmental noise. WECPNL used in domestic as an evaluation metric is only for the aircraft noise. It is, therefore, not adequate for the evaluation of residents' injury, moreover, it is very difficult to measure the aircraft noise by WECPNL due to the complicated calculating procedures as long as automatic measuring system is not used. Accordingly, this study aims to propose alternative evaluation metric for the aircraft noise. To achieve this purpose, WECPNL, $L_{eq}$, $L_{dn}$, other metrics and criteria were compared and analyzed.