• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.33 no.12
• /
• pp.81-90
• /
• 2017

This study was conducted to investigate the thermal environment status of nursery rooms in workplace daycare centers in Jeju and propose measures to improve their indoor physical thermal environment. For this purpose, measurements were performed in the winter indoor physical environment of 51 nursery rooms in 11 workplace daycare centers and a psychological evaluation survey on the thermal environment of nursery rooms was conducted for 70 nursery teachers. The investigation was carried out over 11 days in January 2017. The results are as follow. The average indoor temperature of the nursery rooms was $21.3^{\circ}C$($18.7-23.8^{\circ}C$) and the indoor temperatures of 47 nursery rooms (92.9%) were higher than the environmental hygiene management standard for domestic school facilities ($18-20^{\circ}C$). The average relative humidity was 33.9% (16.4-56.0%), and 37 nursery rooms (86.3%) showed a lower average relative humidity than the standard (40-70%). The average absolute humidity was $9.1g/m^3$ ($4.7-13.6g/m^3$), which was lower than the standard for preventing influenza ($10g/m^3$). When the indoor temperature and humidity of the nursery rooms were compared with international standards, it was found that 85% or more of the 51 nursery rooms maintained appropriate indoor temperatures, but 40-50% of the nursery rooms maintained a low humidity condition. Therefore, they need to pay attention to maintaining the appropriate humidity of the nursery room to keep the children healthy. The average indoor temperature of the nursery rooms showed a weak negative correlation with the average relative humidity. The indoor temperature had a significant effect on the relative humidity: a higher indoor temperature resulted in lower relative humidity. Regarding the fluctuations in the average indoor temperature of the nursery rooms during the day, in daycare centers that used floor heating, the indoor temperature gradually increased form the morning to the afternoon and tended to decrease during lunch time and the morning and afternoon snack times, due to ventilation. The daycare centers that used both floor heating and ceiling-type air conditioners showed a higher indoor temperature and greater fluctuations in temperature compared to the daycare centers that used floor heating only. In the survey results, the average value of the whole body thermal sensation was 3.0 (neutral): 32 respondents (62.7%) answered, "Neutral", Which was the largest number, followed by 21 respondents (30%) who answered, "Slightly hot" and 17 respondents (24.2%) who answered, "Slightly cold." Twenty-nine respondents answered, "Slightly dry," which was the largest number, followed by 28 respondents (54.9%) who answered, "Neutral" and 10 respondents (19.6%) who answered, "Dry." The total number of respondents who answered, "Slightly dry" or "Dry" was large at 39 (56.4%), which suggests the need for indoor environment management to prevent a low-humidity environment. To summarize the above results about the thermal environment of nursery rooms, as the indoor temperature increased, the relative humidity decreased. This suggests the effect of room temperature on the indoor relative humidity; however, frequent ventilations also greatly decrease the relative humidity. Therefore, the ventilation method and the usage of air conditioning systems need to be re-examined.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.30 no.4
• /
• pp.342-352
• /
• 2020

Objectives: The characteristics of research workers are different from those working in the manufacturing industry. Furthermore, the reagents used change according to the research due to the characteristics of the laboratory, and the amounts used vary. In addition, since the working time changes almost every day, it is difficult to adjust the time according to exposure standards. There are also difficulties in setting standards as in the manufacturing industry since laboratory environments and the types of experiments performed are all different. For these reasons, the measurement of the working environment of research workers is not realistically carried out within the legal framework, there is a concern that the accuracy of measurement results may be degraded, and there are difficulties in securing data. The exposure evaluation based on an eight-hour time-weighted average used for measuring the working environment to be studied in this study may not be appropriate, but it was judged and consequently applied as the most suitable method among the recognized test methods. Methods: The investigation of the use of chemical substances in the research laboratory, which is the subject of this study, was conducted in the order of carrying out work environment measurement, sample analysis, and result analysis. In the case of the use of chemical substances, after organizing the substances to be measured in the working environment, the research workers were asked to write down the status, frequency, and period of use. Work environment measurement and sample analysis were conducted by a recognized test method, and the results were compared with the exposure standards (TWA: time weighted average value) for chemical substances and physical factors. Results: For the substances subject to work environment measurement, the department of chemical engineering was the most exposed, followed by the department of chemistry. This can lead to exposure to a variety of chemicals in departmental laboratories that primarily deal with chemicals, including acetone, hydrogen peroxide, nitric acid, sodium hydroxide, and normal hexane. Hydrogen chloride was measured higher than the average level of domestic work environment measurements. This can suggest that researchers in research activities should also be managed within the work environment measurement system. As a result of a comparison between the professional science and technology service industry and the education service industry, which are the most similar business types to university research laboratories among the domestic work environment measurements provided by the Korea Safety and Health Agency, acetone, dichloromethane, hydrogen peroxide, sodium hydroxide, nitric acid, normal hexane, and hydrogen chloride are items that appear higher than the average level. This can also be expressed as a basis for supporting management within the work environment measurement system. Conclusions: In the case of research activity workers' work environment measurement and management, specific details can be presented as follows. When changing projects and research, work environment measurement is carried out, and work environment measurement targets and methods are determined by the measurement and analysis method determined by the Ministry of Employment and Labor. The measurement results and exposure standards apply exposure standards for chemical substances and physical factors by the Ministry of Employment and Labor. Implementation costs include safety management expenses and submission of improvement plans when exposure standards are exceeded. The results of this study were presented only for the measurement of the working environment among the minimum health management measures for research workers, but it is necessary to prepare a system to improve the level of safety and health.

• Journal of the Society of Disaster Information
• /
• v.18 no.1
• /
• pp.182-193
• /
• 2022

Purpose: By measuring and evaluating the risk of biodiesel through non-volatile residue (NVR) and flash point and explosion limit measurement at a specific temperature according to ASTM test standards, the risk of chemical fire causative substances is identified and a universal evaluation method By derivation and securing the risk-related data of the material, it can be used for the identification and analysis of the cause of the fire, and it can be applied to the risk assessment of other chemical substances Method: In order to measure the risk of biodiesel, it was measured using the non-volatile residue(NVR) measurement method, which measures how much flammable liquid is generated at a specific temperature. Heating was tested by applying KS M 5000: 2009 Test Method 4111. In addition, the flash point was measured using the method specified in ASTM E659-782005, and the energy supply method was measured using the constant temperature method. In addition, the explosion limit measurement was conducted in accordance with ASTM E 681-04 「Standard test method for concentration limits of flammability of chemicals(Vapors and gases)」 test standard. Result: As a result of checking the amount of combustible liquid by the non-volatile residue (NVR)measurement method, the non-volatile residue(NVR) of general diesel when left at 105±2℃ for 3 hours was about 30% (70% of volatile matter) and about 4% of biodiesel. In addition, similar results were obtained for the non-volatile residue(NVR)heating temperature of 150±2℃, 3 hours and 200±2℃ for 1 hour, and white smoke was generated at 200℃ or higher. In addition, similar values were obtained as a result of experimentally checking the explosion (combustion) limits of general diesel, general diesel containing 20% biodiesel, and 100% biodiesel. Therefore, it was confirmed that the flammability risk did not significantly affect the explosion risk. Conclusion: The results of this study suggested the risk judgment criteria for mixtures through experimental research on flammable mixtures for the purpose of securing the effectiveness, reliability, and reproducibility of the details of the criteria for determining dangerous substances in the existing Dangerous Materials Safety Management Act. It will be possible to provide reference data for the judgment criteria for flammable liquids that are regulated in the field. In addition, if the know-how for each test method is accumulated through this study, it is expected that it will be used as basic data in the research on risk assessment of dangerous substances and as a basis for research on the determination of dangerous substances.

• Korean Journal of Psychosomatic Medicine
• /
• v.30 no.2
• /
• pp.119-126
• /
• 2022

Objectives : The purpose of this study was to examine the clinical utility of the internalization and externalization higher-order scales of the Minnesota Multiphasic Personality Inventory-Adolescent Restructured Form (MMPI-A-RF), compared with those scales of the Korean Child Behavior Checklist (K-CBCL). Methods : 43 adolescents with internalizing disorders and 44 adolescents with externalizing disorders and their parents were administered the MMPI-A-RF and K-CBCL each. To verify the difference between the internalization and externalization scales of the MMPI-A-RF and K-CBCL for each group, independent-sample t test was performed. To compare the agreement between the MMPI-A-RF and K-CBCL, correlation analysis was also conducted. Lastly, to identify which scales significantly best predict each of the internalizing and externalizing disorder, logistic regression analysis was conducted. Results : Internalization scales of the MMPI-A-RF and K-CBCL were significantly higher in the internalizing disorder group, and the externalization scales were significantly higher in the externalizing disorder group. The positive correlation was significant only for internalization problems between the two evaluation measures in both groups (each r=0.360, p<0.05, r=0.572, p<0.05). In addition, the scales significantly predicted internalizing and externalizing disorders were the internalization and externalization scales of the MMPI-A-RF, followed by the externalization scale of the K-CBCL (R²=0.407, p<0.05). Conclusions : The internalization and externalization higher-order scales of the MMPI-A-RF were found to reliably reflect the characteristics of each disorder in adolescents and be useful evaluative scales to differentiate disorders. Moreover, if adolescents show externalization problems, additional information from the K-CBCL can be more useful to differentiate disorders.

• Analyses & Alternatives
• /
• v.6 no.2
• /
• pp.79-115
• /
• 2022

This study aims to account for electoral choice in the 2020 presidential election by focusing on social identity which forms the basis for core partisan groups. Two views compete to explain the origins of polarization, policy versus party. One emphasizes policy as more influential in choosing presidential candidates. This follows the tradition of retrospective voting theory in which voters' choice rely on government performance. Incumbent president whose performance proves well are rewarded to be reelected. Policy performance is based on measures around distinctive preferences for government spending. Republican Individuals prefer individual responsibility to government support, while Democratic counterparts support government support. Another perspective put an emphasis on the role partisanship which favors in-party members and disfavors partisan out-groups. Interparty animosity plays the key role in determining electoral behavior. This study relies on the Views of the Electorate Research (VOTER) Survey which provides a panel data of several waves from 2011 to 2020. A comparative evaluation of two views highlights three findings. First, policy matters. Policy preferences of voters are the primary drives of political behavior. Electoral outcomes in 2020 turned out to be the results of policy considerations of voters. 53.7 percent of voters tilted toward individual responsibility voted for Trump, whereas 70.4 percent of those favorable views of government support than individual responsibility voted for Biden. Thus effects of policy correspond to a positive difference of 26.4 percent points. Second, partisanship effects are of similar extent in influencing electoral choice of candidates: Democrats are less likely to vote for Trump by 42.4 percent points, while Republicans are less likely to vote for Biden by 48.7 percent points. Third, animosity of Republicans toward Democrat core groups creates 26.5 percent points of favoring Trump over Biden. Democrat animosity toward Republican core groups creates a positive difference of 13.7 percent points of favoring Biden.

• Journal of Service Research and Studies
• /
• v.13 no.1
• /
• pp.186-200
• /
• 2023

This study aims to improve the usability of the white cane, which is walking equipment that most local visually impaired people use and carry when going out, and to contribute to the prevention of safety accidents and the walking rights of visually impaired people by providing improvement and resolution measures for the problems identified. Also, this study is a study on the visually impaired, primarily targeting the 1st to 2nd degree visually impaired people, who cannot go out on their own without walking equipment such as a white cane, corresponding to 20% among approximately 250,000 blind and low vision people in the Korean population. In the study process, the concept has been developed from the user's point of view in order that the white cane becomes a real help in the walking step of the visually impaired and the improvement of usability of the white cane, the main walking equipment for the visually impaired, are done by problem identification through the Double Diamond Model of Design Thinking (Empathize → Define → Ideate → Prototype → Test (verify)). As a result of the investigation in the process of Empathy, a total of five issues was synthesized, including an increase in the proportion of the visually impaired people, an insufficient workforce situation to help all the visually impaired, an improvement and advancement of assistive devices essential for the visually impaired, problems of damage, illegal occupation, demolition, maintenance about braille blocks, making braille block paradigms for the visually impaired and for everyone. In Ideate and Prototype steps, situations derived from brainstorming were grouped and the relationship were made through the KJ method, and specific situations and major causes were organized to establish the direction of the concept. The derived solutions and major functions are defined in four categories, and representative situations requiring solutions and major functions are organized into two user scenarios. Ideas were visualized by arranging the virtual Persona and Customer Journey Map according to the situation and producing a prototype through 3D modeling. Finally, in the evaluation, the final concept derived is a device such a smart cane for guidance for the visually impaired as ① a smart cane emphasizing portability + ② compatibility with other electronic devices + ③ a product with safety and convenience.

• The Journal of Korean Society for Radiation Therapy
• /
• v.34
• /
• pp.31-42
• /
• 2022

Purpose: This study measures and compares the surface dose values in the virtual target volume using Tomotherapy, Halcyon, and TrueBeam equipment using 6MV-Flattening Filter-Free(FFF) energy. Materials and Methods: CT scan was performed under three conditions of without bolus, 0.5 cm bolus, and 1 cm bolus using an IMRT phantom (IBA, Germany). The Planning Target Volume (PTV) was set at the virtual target depth, and the treatment plan was established at 200 cGy at a time. For surface dosimetry, the Gafchromic EBT3 film was placed in the same section as the treatment planning system and repeated measurements were performed 10 times and then analyzed. Result: As a result of measuring the surface dose for each equipment, without, 0.5 cm, 1 cm bolus is in this order, and the result of Tomotherapy is 115.2±2.0 cGy, 194.4±3.3 cGy, 200.7±2.9 cGy, The result in Halcyon was 104.7±3.0 cGy, 180.1±10.8 cGy, 187.0±10.1 cGy, and the result in TrueBeam was 92.4±3.2 cGy, 148.6±5.7 cGy, 155.8±6.1 cGy, In all three conditions, the same as the treatment planning system, Tomotherapy, Halcyon, TreuBeam was measured highly in that order. Conclusion: Higher surface doses were measured in Tomotherapy and Halcyon compared to TrueBeam equipment. If the characteristics of each equipment are considered according to the treatment site and treatment purpose, it is expected that the treatment efficiency of the patient will increase as well as the treatment satisfaction of the patient.

• Korean Journal of Psychosomatic Medicine
• /
• v.31 no.1
• /
• pp.10-18
• /
• 2023

Objectives : The purpose of this study is to investigate the characteristics of patients referred for delirium and depressive disorder and to find direction of improvement of consultation-liason psychiatry in general hospital. Methods : We performed a retrospective computed chart review of the 4,966 inpatients hospitalized at Konkuk University Hospital who were referred to the Department of Psychiatry from August 1, 2005 to December 31, 2011. Results : Depressive disorder shows the order of frequency of consultation type Parallel-Complementary-Mending. Delirium shows the order of frequency of consultation type Mending-Parallel-Complementary. When comparing 'follow up consultation' and 'without follow up consultation' group within the depressive disorder, the proportion of men in the 'follow up consultation' group was higher. In the analysis of the consultation type, the 'follow up consultation' group showed the order of consultation type Parallel-Mending- Complementary, and type Parallel-Complementary-Mending in the 'without follow up consultation' group. When comparing 'follow up consultation' and 'without follow up consultation' group within the delirium, the proportion of the surgical field in the 'follow up consultation' group was higher. In the analysis of the consultation type, both group showed the order of consultation type Mending-Parallel- Complementary. Conclusions : Doctors in each department and psychiatrists should pay attention to delirium symptoms that may occur in surgical inpatients and preventive measures should be taken. Screening tests should be conducted in medical patients to properly evaluate coexisting psychiatric diseases. Risk factors of Delirium and Depressive disorder should be identified from the time of hospitalization, and actively discussing treatment plans and early interventions could improve the quality of medical services.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.17 no.5
• /
• pp.67-80
• /
• 2022

This study was conducted to derive policy measures such as fostering and supporting by examining the actual conditions of domestic startups. The subject of this study was the start-ups located in Seongnam-si, where Pangyo Techno Valley, which is the highest-level innovation cluster in Korea and is evaluated as a start-up mecca. Startups were defined as startups under 7 years old based on new technologies such as IT, BT, and CT, and the subjects of the study were selected. This can be seen as a step forward from previous research in that it embodies the concept of a startup that was previously abstract in a quantitatively measurable way. As a result of the analysis, about 94% of startups are distributed in the so-called "Death Valley" growth stage, and startups above scale-up, which means full-scale growth beyond BEP, account for about 6%. appeared to be occupied. He cited the problem of start-up funds as the biggest difficulty in the early stages of startups, and cited the loan evaluation method that prioritizes sales or collateral in raising funds as the biggest problem. In addition, start-ups rated the access to private investment capital such as VC, AC, and angel investors at a low level compared to policy funds, which are public funds. Most startups showed a lot of interest in overseas expansion, and they chose matching overseas investors such as overseas VCs as the biggest support for overseas expansion. The overall competitiveness in the overseas market was 49.6 points, which is less than 50 points out of 100, indicating that the overall competitiveness was somewhat inferior. It was analyzed that public support and investment in overseas sales channels (sales channels, distribution networks, etc.) should be prioritized along with enhancement of technological competitiveness in order for domestic startups to increase their competitiveness in overseas markets as well as in the domestic market.

• Journal of the Korean Society of Radiology
• /
• v.18 no.3
• /
• pp.293-300
• /
• 2024

On October 31, 2023, the revision of the Medical Technologist Act made it mandatory to complete field training courses in order to obtain a license as a radiologic technologist. Therefore, we would like to survey the actual situation of field training in medical institutions to inform the revised Medical Technologist Act and propose improvement measures to increase the effectiveness of field training. A survey was conducted from March to April, 2023, among radiologic technologists working in medical institutions. The questionnaire was sent through a form on a domestic portal site, Company N, and 120 respondents completed it. Eighty-two respondents, or 68.3 percent, had experience in educating on-the-job training students. 58% of the respondents were aware of the fact that the amendment to the Act on Medical Technologist etc. made field training mandatory to obtain a radiologic technologist license. In accordance with Article 9 of the Medical Technologist Act, which prohibits unlicensed persons from practicing, 50% of the respondents were aware that those who are in training to complete an education course equivalent to the license they are seeking to obtain at a university or other institution are allowed to practice as medical Technologists. When asked what is currently taught during fieldwork, 6% of respondents said that they are required to perform radiation-generating activities in addition to observing, guiding patients, and positioning and moving patients. When asked about the future direction of education as fieldwork becomes mandatory for licensure, 77% of respondents said that they will teach more than they currently do. When asked about the appropriate total length of fieldwork, 35% said 12 weeks and 480 hours, 33% said 8 weeks and 320 hours, and 27% said 16 weeks and 640 hours. It can be seen that the current on-the-job training is inadequate according to various regulations, and students' satisfaction is low. However, with the revision of the Act on Medical Technologists, field training has become mandatory to obtain a license as a radiologist, and it is necessary to improve the educational conditions of field training. Therefore, it is necessary to comply with the Nuclear Safety Act and the Rules on the Safety Management of Diagnostic Radiation Generating Devices, introduce standardized training objectives and evaluation systems, designate training hospitals and radiologists in charge of training, and introduce extended training periods and simulation exercises to internalize field training.