• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.11a
• /
• pp.887-888
• /
• 2010

• Composites Research
• /
• v.35 no.6
• /
• pp.469-476
• /
• 2022

In this paper, the microwave absorbing characteristics after the impact of the radar-absorbing structure (RAS) consisting of periodic pattern sheet (PPS) and glass fiber-reinforced plastic (GFRP) were experimentally investigated. The fabricated RAS effectively absorbed the microwave in the X-band (8.2-12.4 GHz). In order to induce the damage to the RAS, a low-velocity impact test with various impact energy of 15, 40, and 60 J was conducted. Afterward, the impact damage was observed by using visual inspection, non-destructive test, and image processing method. Moreover, the absorbing performance of intact and damaged RAS was measured by the free-space measurement system. The experiment results revealed that the delamination damage from the impact energy of 15 J did not considerably affect the microwave absorbing performance of the RAS. However, fiber breakage and penetration damage with a relatively large damaged area were occuured when the impact energy was increased up to 40 J and 60 J, and these failures significantly degraded the microwave absorbing characteristics of the RAS.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.22 no.2
• /
• pp.179-186
• /
• 2012

The potential hazards resulting from a low-velocity impact(bird-strike, tool drop, runway debris, etc.) on aircraft structures, such as engine nacelle or leading edges has been a long-term concern to the aircraft industry. Certification authorities require that exposed aircraft components must be tested to prove their capability to withstand low-velocity impact without suffering critical damage. In most of the past research studies unloaded specimens have been used for impact tests, however, in reality it is much more likely that a composite structure is exposed to a certain stress state when it is being impacted, which can have a significant effect on the impact performance. And the radiated impact sound induced by impact is analyzed for the damage detection evaluation. In this study, an investigation was undertaken to evaluate the effect in-plane loading on the impact force and sound of composite laminates numerically.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.05a
• /
• pp.1323-1324
• /
• 2010

• Journal of the Korean Geotechnical Society
• /
• v.15 no.2
• /
• pp.139-152
• /
• 1999

These days we broadly apply drilled shafts for deep foundations to build infrastructures. The defects of the deep foundations cause the decrease of their support load capacity and the increase of settlement, and the subsequent damage of the super-structures. In consequence, non-destructive testings techniques of concrete piles are important for their integrity evaluation. To improve understanding and reliable application of the impact echo method for the integrity evaluation of the drilled concrete piles, numerical studies of the impact response of concrete piles by using axi-symmetric three-dimensional finite element method are peformed for (a) sound piles: (b) piles containing necks, voids and layers of low-quality concrete: and (c) piles in soil and/or above rock. The results of these studies show that the finite element method is effective for evaluating the impact response of drilled concrete piles.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.20 no.12
• /
• pp.3847-3855
• /
• 1996

In order to study the relationship between static and cynamic behaviors of silion caride, both quasi-static indentaiton and impact experiments of spherical particle have been conducted. The difference inmaterial behavior when using the two mehtods suggests a loading rate difference in the damate pattrern and fracture strength of silicon carbide. This investigation showed some difference in damage pattern according to particla property, especially inthe case of particle impact. There was no differences in deformation behaviors according to the loading rate when the crater profiles were compared with each other at the same contact radius. From the result of residual strength evaluation, it was found that the strength degradation began at the initiation of ring crack and its behavior was colsely related to morphologies of the damage developed which was also dependent upon the extent of deformation atthe loaidng point. In the case of static indentation, there didnot exist the particle property effects onthe strength degradation behavior.

• Journal of the Korean Society for Railway
• /
• v.15 no.2
• /
• pp.109-115
• /
• 2012

In order to evaluate the effect of structural degradation of a GFRP composite bogie frame due to ballast-flying phenomena, the impact test and residual compression test after impact was conducted for glass fiber/epoxy 4-harness satin woven laminate composites applied to skin part of a bogie frame. The impact test was performed using a instrumented impact testing system with energy levels of 5J, 10J, and 20J, and the impactor was designed to have various ballast shapes such as sphere, cube, and cone to consider the ballasted track environments. The residual compression strength was tested to evaluate the degradation of mechanical properties of impact-damaged laminate composites. The results showed that the damage area and the degradation of residual compressive strength after impact for laminate composites was increased with increase of impact energy for all ballast shapes, and was particularly most influenced by ballast shape of cone.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.9 no.3
• /
• pp.49-57
• /
• 2009

To minimze the degree of damage for the SMART highway's punctuality and safety after car-barrier collisions, the impact condition for longitudinal barriers of SMART highway was determined to be quite larger than the existing maximum impact condition. The impact condition consists of impact vehicles, impact velocities, and impact angles. To consider the occupant safety of passenger cars as much as possible, a small car with high risk during impact was selected as the impact vehicle for the evaluation of occupant risk. The impact velocity was determined to be 20% larger than the existing maximum impact velocity in order to include accident impact velocities as much as possible. The impact angle was determined to include most of expected accident impact angles. Computer simulations using various impact conditions were conducted for the existing domestic highest-performance medium and roadside barrier. How the suggested impact condition has an effect on the occupant safety was investigated. The existing domestic highest-performance medium and roadside barriers could not satisfy the suggested impact condition. New high-performance longitudinal barriers are required to minimize the degree of damage for the SMART highway's punctuality and safety after car-barrier collisions.

• Journal of Environmental Science International
• /
• v.29 no.5
• /
• pp.551-558
• /
• 2020

This study aims to increase the ability to adapt to the ecosystem and promote a sustainable use of the natural environment, by classifying the types of damaged lands according to various factors, such as the characteristics of the target area and form, cause, and impact of damage. Moreover, the study suggests the development of evaluation categories and criteria by each type. The results obtained are as follows: first, for the assessment of damaged lands, the changed areas were identified utilizing land cover maps. Video analysis was performed to increase the accuracy, and 88 sites were obtained. Second, the types of damage were classified into ecological infrastructure and ecological environment, and the sub-factors of the cause of damage were classified into 12 factors. Third, each evaluation system for the types of damage was composed of four steps, considering each type of damage and the level of evaluators being higher than paraprofessionals. To supplement this study, it will be necessary to utilize the database of damaged lands other than the Seoul Metropolitan Area and conduct an on-site survey for verification in the future.

• Journal of Environmental Impact Assessment
• /
• v.30 no.5
• /
• pp.297-304
• /
• 2021

The environmental impact assessment(EIA) project in Korea has undergone changes and revisions in various evaluation items for about 30 years after the introduction of the Environmental Conservation Act (1997). However, despite the importance of land use evaluation items under the current EIA Act, there are insufficient studies to consider. Therefore, this study focused on the land-use evaluation items based on the EIA guidelines, reviewed 90 of the evaluation documents and consultation documents, and tried to suggest implications and supplementary points forthe domestic EIA land-use evaluation items. As a result, the paradigm was changing from land efficiency centered on development in the past to land efficiency centered on the natural environment and resource conservation. However, in spite of the manual for fitting the paradigm change, opinions on the conservation of the natural environment are still being drawn in the consultation document, so it needs improvement. Two improvements in the impact assessment process suggested in this study are the establishment of standardized spatial data and a quantitative impact and reduction method evaluation tool based on it. In particular, there is a need for a plan evaluation tool for land use arrangement and distribution that can solve the needs of minimizing damage to the natural environment and securing green space and a green network.