• Title/Summary/Keyword: European yield model

Search Result 10, Processing Time 0.022 seconds

Evaluation of Strength Properties for Bolted Connections with Lumber from Small Diameter Logs

  • Park, Joo-Saeng;Park, Chun-Young;Chun, Su-Kyoung;Lee, Jun-Jae
    • Journal of the Korean Wood Science and Technology
    • /
    • v.30 no.3
    • /
    • pp.59-65
    • /
    • 2002
  • EYM (European Yield Model), which was adopted in NDS (National Design Specification for wood construction), has been used in Korea without any verification of the analysis of bolted wood connections. In the case of applying lumber from domestic small diameter logs, however, there are some problems with the direct application of EYM ; 1) relatively low dowel bearing strength and dimensional stability due to a large amount of immature wood, 2) effect of MC (moisture contents) on the dowel bearing strength of wood and the yield load of a bolted connection. To evaluate the strength properties of bolted connections with lumber from domestic small diameter logs, effect of MC on the dowel bearing strength of wood was investigated and double shear bolted connection tests were performed. As the MC of wood increased, the dowel bearing strength was linearly reduced, even under 19% MC, which showed that adjustment, not considered in NDS, was required. Double shear bolted connection tests indicated that effect of MC on yield load should be considered in order to determine design value.

Performance Analysis of the HIPERLAN Channel Access Control Protocol (고속 무선 근거리 통신망(HIPERLAN) 채널접근제어 프로토콜의 성능분석)

  • Hyun, Young-Guen;Lee, Jong-Kyu
    • Journal of KIISE:Information Networking
    • /
    • v.27 no.1
    • /
    • pp.22-29
    • /
    • 2000
  • In this paper, we analyzed the performance of EY-NPMA(Elimination Yield-Non-preemptive Priority Multiple Access) protocol-channel access control protocol of HIPERLAN(HIgh PErformance Radio Local Area Network) type 1 specification, adopted as european high speed wireless LAN standard by ETSI(European Telecommunication Standards Institute). We established a system model for EY-NPMA protocol analysis, analyzed success probability in a channel access cycle, and derived expressions for the average length of contention phase. Using a M/G/1 model, we approximated the normalized delay, and throughput, and we evaluated these results by simulations.

  • PDF

COMMODITY FUTURES TERM STRUCTURE MODEL

  • Choi, Hyeong In;Kwon, Song-Hwa;Kim, Jun Yeol;Jung, Du-Seop
    • Bulletin of the Korean Mathematical Society
    • /
    • v.51 no.6
    • /
    • pp.1791-1804
    • /
    • 2014
  • A new approach to the commodity futures term structure model is introduced. The most salient feature of this model is that, once the interest rate model is given, the commodity futures price volatility is the only quantity that completely determines the model. As a consequence this model enables one to do away with the drudgeries of having to deal with the convenience yield altogether, which has been the most thorny point so far.

Analysis of the Behavior of Bolt Jointed Wood Connections by Applying Semi-Rigid Theory

  • Kim, Gwang-Chul;Lee, Jun-Jae
    • Journal of the Korean Wood Science and Technology
    • /
    • v.28 no.4
    • /
    • pp.72-82
    • /
    • 2000
  • Attempts were made to analyze the behavior of single and multiple-bolted connections through theoretical methods such as European yield theory, empirical approaching method, and semi-rigid theory instead of many experimental methods that have been actually inefficient and non-economical. In the case of a single-bolted connection, if accurate characteristic values of a material could be guaranteed, it would be more convenient and economical to perform the behavior analysis using a model based on the semi-rigid theory, instead of the existing complex yield model, or the empirical formula which produces errors, giving different results from the actual ones. If the variables of equation determining the load and deformation could be appropriately controlled, the analytical method in conjunction with a semi-rigid theory could be effectively applied to obtain the desirably predicted value, considering that the appropriate solution could be derived through a simpler equation using a less difficult method compared to the existing yield model. It is concluded that analytical method with semi-rigid theory can be used in the behavior analysis of bolted connection because our developed method showed excellent analysis ability of behavior until number of bolt is two. Although our analytical method has the disadvantage that the number of bolt is limited to two, it is concluded that it has the advantage than numerical method which complicated and time-consuming.

  • PDF

Genetic and Phenotypic Evaluation of Milk and Fat Production Traits and Their Interrelationship in (Zebu×European) Crossbred Cattle Using Parent Group Mixed Model

  • Singh, D.;Yadav, A.S.;Dhaka, S.S.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • v.16 no.9
    • /
    • pp.1242-1246
    • /
    • 2003
  • Data pertained to 335 crossbred cows comprising of 1/2 Friesian (F) + 1/2 Hariana (H), 1/2 F + 1/4 Jersey (J) + 1/4 H, 1/2 F + 1/4 Brown Swiss (BS) + 1/4 H, 1/2 F + 1/4 Red Dane (R) + 1/4 H, FR (I) and FRH (I) genetic groups extending over a period of 21 years (1970-1990) maintained at Animal Farm of CCS HAU, Hisar. The averages for first lactation milk yield was $2,486.24{\pm}80.26kg$ and peak yield of first three lactation were $11.35{\pm}0.72kg$, $13.97{\pm}0.60kg$ and $16.02{\pm}0.42kg$, respectively. The lifetime milk production was observed as $11,305.16{\pm}1,004.52kg$ in crossbred cattle. The average first lactation fat yield was observed as $102.06{\pm}0.01kg$ and peak fat yield of first three lactation were $0.458{\pm}0.01$, $0.490{\pm}0.01$ and $0.500{\pm}0.02kg$, respectively. The lifetime fat production was estimated as $502.31{\pm}45.90kg$. LTMP and LTFP had reasonably good additive genetic variance which could be exploited either through mass selection/combined with family or pedigree selection. FLMY, peak yields and LTMP had significant positive phenotypic correlation with FLFY and LTFP and the correlation at the genetic level were also higher and positive for these traits. Finally, peak week milk yield of first lactation (PMY1) was the earliest available trait having desirable and significant correlation at phenotypic and positive at genetic level with FLFY, PFY1 and PFY2, PFY3 and LTFP and selection for this trait will help in early evaluation of sires and dams and will increase genetic advancement per unit of time.

Shear Performance of Wood-Concrete Composite II - Shear Performance with Different Anchorage Length of Steel Rebar in Concrete -

  • Lee, Sang-Joon;Eom, Chang-Deuk;Kim, Kwang-Mo
    • Journal of the Korean Wood Science and Technology
    • /
    • v.40 no.5
    • /
    • pp.327-334
    • /
    • 2012
  • Wood and concrete show significantly different physical properties, and it need to be firstly understood for using wood-concrete composite. This study is performed for compensating this and effective hybridization of wood and concrete. This research in planned for wood-concrete composite after previous research which deals the shear performance with different anchorage length of steel rebar in wood. Yield mode and reference design value (Z) were derived using EYM (European Yield Model). And the yield mode changed before and after anchorage length of 10~15 mm - $I_s$ mode to IV mode. There was not increasing tendency of shear performance with increased anchorage length for over 20 mm of anchorage in concrete. And wood composite shows 65% and 93% on initial stiffness and yield load respectively compared with the wood-concrete composite. Wood-concrete composite showed brittle failure after yield point while wood-to-wood composite showed ductile failure.

Estimate of Bolt Connection Strength of Reinforced Glulam using Glass Fiber (유리섬유 보강집성재 볼트 접합부 전단내력 예측)

  • Kim, Keon-ho;Hong, Soon-il
    • Journal of the Korean Wood Science and Technology
    • /
    • v.44 no.1
    • /
    • pp.67-74
    • /
    • 2016
  • The yield shear strength of bolt connection in glass fiber reinforced glulam was predicted using a design-based equation, and was compared to the empirical yield shear strength. For the predicted equation, the mechanical properties of member (the elastic modulus, Poisson's ratio, shear modulus) was tested. The fracture toughness factor ($K_{ft}$) of glass fiber reinforced glulam was reflected to the revision of the design equation of bolted connection. The compressive strength properties to grain direction was influenced by annual ring angle and width of lamina. Compared with the revised yield shear strength of reinforced glulam, it was tended to be similar to the empirical yield shear strength on the diameter of bolt and the reinforcements. The revised yield shear strength from proposed formula of KBC was most appropriately matched in the bolt connection of the glass fiber reinforced glulam.

Finite element evaluation of the strength behaviour of high-strength steel column web in transverse compression

  • Coelho, Ana M. Girao;Bijlaard, Frans S.K.
    • Steel and Composite Structures
    • /
    • v.10 no.5
    • /
    • pp.385-414
    • /
    • 2010
  • In current European Standard EN 1993, the moment-rotation characteristics of beam-to-column joints made from steel with a yield stress > 460MPa are obtained from elastic design procedures. The strength of the joint basic components, such as the column web subject to local transverse compression, is thus limited to the yield resistance rather than the plastic resistance. With the recent developments of higher strength steel grades, the need for these restrictions should be revisited. However, as the strength of the steel is increased, the buckling characteristics become more significant and thus instability phenomena may govern the design. This paper summarizes a comprehensive set of finite element parametric studies pertaining to the strength behaviour of high-strength steel unstiffened I-columns in transverse compression. The paper outlines the implementation and validation of a three-dimensional finite element model and presents the relevant numerical test results. The finite element predictions are evaluated against the strength values anticipated by the EN 1993 for conventional steel columns and recommendations are made for revising the specifications.

Strength Property of Double Shear Bolted-Connections of Larch (낙엽송 부재의 이중 전단 볼트 접합부 강도 성능)

  • Park, Chun-Young;Kim, Kwang-Mo;Lee, Jun-Jae
    • Journal of the Korean Wood Science and Technology
    • /
    • v.33 no.1 s.129
    • /
    • pp.7-16
    • /
    • 2005
  • This study was carried out to evaluate the structural property of double shear bolted connections in Korean Larch. For the main member, sawn lumber and Glulam were used in which thickness of lumber is 39 mm, 89 mm, 139 mm, 189 mm and Glulam 80 mm, 140 mm, 170 mm. For the side member, sawn lumber and steel plate were used in which thickness of lumber is the same of the main member and steel plate is 6mm. And connections were jointed by M12, M16, M20 bolts which were usually used for wood constructions in Korea. Directions of loading to connections were perpendicular and parallel to grain of main and side member. First, through the dowel bearing test, the dowel bearing strength was evaluated and through the bolt bending tests, the bolt bending strength was evaluated. And then experiments for the connection were performed. Obtained results from experiments were compared with calculated values by EYM and analyzed. Strength of double shear bolted connections in Korean Larch was similar or higher than calculated value by EYM. Especially when the side member was made by the sawn lumber, it was similar to the calculated value. In failure mode, the mode was effected by the knot and the dry defect. In the thin main member, it was shown mode I and as the thickness of the main member was thicker, it was changed into mode III.

Art and Collectivity (미술과 집단성)

  • Kwok, Kian-Chow
    • The Journal of Art Theory & Practice
    • /
    • no.4
    • /
    • pp.181-202
    • /
    • 2006
  • "When it comes to art, nationalism is a goodticket to ride with", says the title of a report in the Indian Express (Mumbai, 29 Oct 2000). The newspaper report goes on to say that since Indian art was kept "ethnic" by colonialism, national liberation meant opening up to the world on India's own terms. Advocacy, at the tail end of the 20th century, would contrast dramatically with the call by Rabindranath Tagore, the founder of the academy at Santiniketan in 1901, to guard against the fetish of nationalism. "The colourless vagueness of cosmopolitanism," Tagore pronounced, "nor thefierce self-idolatry of nation-worship, is the goal of human history" (Nationalism, 1917). This contrast is significant on two counts. First is the positive aspect of "nation" as a frame in art production or circulation, at the current point of globalization when massive expansion of cultural consumers may be realized through prevailing communication networks and technology. The organization of the information market, most vividly demonstrated through the recent FIFA World Cup when one out of every five living human beings on earth watched the finals, is predicated on nations as categories. An extension of the Indian Express argument would be that tagging of artworks along the category of nation would help ensure greatest reception, and would in turn open up the reified category of "art," so as to consider new impetus from aesthetic traditions from all parts of the world many of which hereto fore regarded as "ethnic," so as to liberate art from any hegemony of "international standards." Secondly, the critique of nationalism points to a transnational civic sphere, be it Tagore's notion of people-not-nation, or the much mo re recent "transnational constellation" of Jurgen Habermas (2001), a vision for the European Union w here civil sphere beyond confines of nation opens up new possibilities, and may serve as a model for a liberated sphere on global scale. There are other levels of collectivity which art may address, for instance the Indonesian example of local communities headed by Ketua Rukun Tetangga, the neighbourhood headmen, in which community matters of culture and the arts are organically woven into the communal fabric. Art and collectivity at the national-transnational level yield a contrasting situation of, on the idealized end, the dual inputs of local culture and tradition through "nation" as necessary frame, and the concurrent development of a transnational, culturally and aesthetically vibrant civic sphere that will ensure a cosmopolitanism that is not a "colourless vagueness." In art historical studies, this is seen, for instance, in the recent discussion on "cosmopolitan modernisms." Conversely, we may see a dual tyranny of a nationalism that is a closure (sometimes stated as "ethno-nationalism" which is disputable), and an internationalism that is evolved through restrictive understanding of historical development within privileged expressions. In art historical terms, where there is a lack of investigation into the reality of multiple modernisms, the possibility of a democratic cosmopolitanism in art is severely curtailed. The advocacy of a liberal cosmopolitanism without a democratic foundation returns art to dominance of historical privileged category. A local community with lack of transnational inputs may sometimes place emphasis on neo-traditionalism which is also a double edged sword, as re kindling with traditions is both liberating and restrictive, which in turn interplays with the push and pull of the collective matrix.

  • PDF