• Bulletin of the Korean Chemical Society
• /
• v.32 no.1
• /
• pp.131-136
• /
• 2011

Synthesis of N-(1H-benzimidazol-2-yl)-6-substituted-1,3-benzothiazol-2-amines and 6-substituted-N-(4,5-dihydro-1H-imidazol-2-yl)-1,3-benzothiazol-2-amines by the reaction of substituted 2-aminobenzothiazoles with carbon disulphide and methyl iodide followed by the reaction with o-phenylene diamine/ethylene diamine are reported. All the synthesized compounds were characterized by elemental analysis, IR spectra and $^1H$ NMR spectral studies. The potent antibacterial and entomological (antifeedant, acaricidal, contact toxicity and stomach toxicity) activities of the synthesized compounds were investigated.

• Journal of the Microelectronics and Packaging Society
• /
• v.29 no.4
• /
• pp.15-20
• /
• 2022

Aerogel is a material having a nanopore structure based on a high porosity. Due to this high porosity, it has excellent properties not found in conventional materials, but its application has been limited due to low mechanical strength. Therefore, to improve the mechanical strength of the aerogel, polyurea crosslinking was introduced and a precursor having an amine group essential for polyurea polymer formation was selected to synthesize a polyurea crosslinked aerogel composite. In addition, the crosslinking of polyurea was adjusted according to the number of amine groups present in aminosilane. It was confirmed through various analyses that the nanopore structure of the aerogel was maintained to have mesopores. The aerogel thus formed was able to improve the mechanical strength by about two times, and it was confirmed through field emission scanning electron microscope analysis that a one-dimensional polymer was formed on the silica aerogel surface through the introduction of ethylene diamine. The one-dimensional polymer thus formed has improved mechanical properties, resulting in securing an elastic modulus of about 2.66 MPa.

• Applied Chemistry for Engineering
• /
• v.10 no.7
• /
• pp.990-995
• /
• 1999

To determine the effect of chemical structure of linear amine curing agents on thermal and mechanical properties, standard epoxy resin DGEBA was cured with ethylene diamine(EDA) and hexamethylene diamine(HMDA) in a stoichiometrically equivalent ratio. From this work, the effect of linear amine curing agents on the thermal and mechanical properties is significantly influenced by the chemical structure or chain length of curing agents. In contrast, the results show that the DGEBA/EDA system having the two carbons had higher values in the thermal stability, maximum conversion of epoxide, density, glass transition temperature, tensile modulus, flexural strength, and flexural modulus than the DGEBA/HMDA system having the six carbons, whereas the DGEBA/EDA cure system had relatively low values in the shrinkage(%), thermal expansion coefficient, tensile strength, and had similar values in the maximum exothermic temperature, and conversion of epoxide compared to the DGEBA/HMDA cure system. This findings indicate that packing ability in the HMDA structure affects the thermal and mechanical properties.

• Journal of the Korean Chemical Society
• /
• v.27 no.5
• /
• pp.330-339
• /
• 1983

The CNDO/2 and STO-3G calculations were performed on nitrogen, oxygen, and sulfur compounds in order to examine the effect of interactions between two nonbonding (n) orbitals in the same molecule separated by N intervening $\sigma$ bonds based on the PMO approach. Calculated basis level energies, energy splittings, and interaction energy changes for both chain and cyclic model compounds were qualitatively compared with the corresponding predictions derived from perturbational formalism for n-n orbital interactions and successfully explained in terms of the derived energy expressions. In general, through-space interaction term could be neglected in the N and O systems. And the calculated results were explained simply by through-bond interaction term. As a result, through-bond interaction placed n- below n+ for odd systems and n+ below n- for even systems. Also energy splittings in odd systems were larger than those in even systems. However, in the cases of cis-ethylene diamine and o-phenylene diamine(conformer VI in Table 4), through-space interaction term was found to be substantial and the opposing effects of through-space and through-bonds interactions were observed. Finally it was found that the interactions between two n orbitals on S atoms always had some contribution of the destabilizing through-space interaction term. This result was consistent with the fact that the lone pair lobes of third elements were larger in size than those of the second period elements.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2008.10a
• /
• pp.9-10
• /
• 2008

Tricrecyl phosphate(TCP)-containing polyurea microcapsules were prepared by interfacial polymerization using aromatic 2,4-toluene diisocyanate(TDI) and Ethylene diamine(EDA) as wall forming materials. The effects of the protective colloids of polyvinylalcohol(PVA) and gelatin were investigated through experimentation.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.03a
• /
• pp.191-191
• /
• 2003

가시광선영역에서 높은 광학적 투명도를 갖는 n-type 반도체인 ZnO 박막은 넓은 범위에서 응용되고 있다. 현재 ZnO 박막의 특성 향상을 위하여 여러 원소(Al, Ga)의 도핑을 시도하고 있다. 특히 Al-doped ZnO 박막은 sol-gel dip coating에 의해서도 높은 전기전도도와 투과율로 활발히 연구되고 있다 본 논문에서는 여러 도핑농도를 갖는 Al-doped ZnO 박막이 sol-gel dip coating법에 의해 준비되었다. Al-doped ZnO 박막은 zinc acetate [Zn($CH_3$COO$_2$)ㆍ2$H_2O$] powder 와 여러 도핑농도를 갖는 aluminum nitrate (Al(NO$_3$)$_3$ㆍ9$H_2O$) powder를 알코올에 용해하여 $H_2O$, Ethylene glycol, Ethylene diamine 등을 첨가하여 제조하였다 XRD와 SEM (Scanning electron microscope)이 막의 상형성 분석을 위해 이용되었으며, 가시광선 영역 투과율(UV/VIS spectrophotometer)과 표면전기저항(four point probe)이 주요 특성으로 분석되었다.

• Textile Coloration and Finishing
• /
• v.9 no.5
• /
• pp.63-74
• /
• 1997

Polyurethane microcapsules were synthesized by interfacial polymerization in an aqueous poly(ethylene glycol) dispersion with ethylenediamine as chain extender of toluene diisocyanate in perfume oil using poly(vinyl alcohol) as the stabilizing agent. The effect of chemical structure on the average particle size and distributions, morphologies, and thermal properties to design microcapsules for the sustained release system was investigated. It came to be known that polyurethane microcapsules with ethylene diamine as chain extender had a rounder, more permeable and controlled release membranes. And the release test of polyurethane microcapsules with different soft segment content was done to certify the effect of long methylene chain. According to the higher molecular weight of polyether polyol, the release rate of microencapsulated disperse dye molecular was faster.

• Proceedings of the KOSOMBE Conference
• /
• v.1996 no.11
• /
• pp.327-330
• /
• 1996

Poly(L-leucine)(PLL)/poly(ethylene oxide)(PEO)/poly (L-leucine)(PLL) block copolymers were synthsized by polymerization of L-leucine N-carboxyanhydride with diamine-terminated PEO for possibility of wound dressing which may have several advantages such as 1) increase of solubility, 2) control of biodegradation, 3) absorption of body fluid. 4) non-immunogenic effect than PLL homopolymer wound dressing aleady commercialized. Water content increased with an increase of PEO content in the block copolymer due to the hydrophilicity of PEO. Release of silver sulfadiazine(AgSD) from AgSD loaded wound dressing increased with an increase of PEO content in the block copolymer. It was found that the number of Pseudomonas aeruginosa decrease with an increase of PEO content due to the fast release of antibacterial agents with an increase of PEO content in the block copolymer.

• Bulletin of the Korean Chemical Society
• /
• v.1 no.2
• /
• pp.54-57
• /
• 1980

Trichloromethylphosphonyl dichloride was prepared by the aluminium chloride method. We synthesized several heterocyclic compounds containing phosphorus atom by the stepwise esterification of trichloromethylphosphonyl dichloride with ethylene glycol, 2-mercaptoethanol, ethylene diamine, and 2-aminoethanol and the resulting heterocyclic compounds are 2-trichloromethyl-1,3,2-dioxa-, 2-trichloromethyl-1,3,2-thioxa-, 2-trichloromethyl-1,3,2-diaza-, 2-trichloromethyl-1,3,2-diaza-, and 2-trichloromethyl-1,3,2-oxazaphospholane-2-oxide. The best results were obtained in the solution of triethylamine as hydrochloric acid trapping agent. The structure of five-membered heterocyclic phosphonates were characterized by their IR, NMR, and elementary analysis and the mass spectra of the compounds were analyzed.

• Horticultural Science & Technology
• /
• v.29 no.4
• /
• pp.326-335
• /
• 2011

When bougainvilleas are subjected to indoor low-light conditions, flower bracts regularly abscise. This study elucidates the effects of plant growth regulators on bract longevity of potted bougainvillea. Potted 'Taipei Red' bougainvillea in four different bract development stages were treated with 1-MCP (1-methylcyclopropene), NAA (1-naphthaleneacetic acid), SNA (sodium salt of naphthaleneacetic acid), IBA (indolebutyric acid), BA (6-benzylaminopurine), $KH_2PO_4$ (potassium dihydrogen phosphate), Put (diamine putrescine), SA (salicylic acid), or STS (silver thiosulfate) and were moved to indoor low-light conditions after treatments. Experimental results indicate that 1-MCP, NAA, SNA, BA, Put, and SA prolonged bract longevity, and this effect increased as bract stage increased. The effect of STS was significant in early bract stages and decreased as bract stages increased. Additionally, 1-MCP, NAA, SNA, BA, Put, SA, and STS treatment significantly reduced endogenous ACC (1-aminocyclopropene-1-carboxylate) content and ACC oxidase activity, suggesting that the inhibition of ethylene production was achieved via physiological metabolism. However, treatment with IBA or $KH_2PO_4$ had no effect on the bract longevity at any stage. In the combined chemical treatments, NAA + STS or NAA + SA were effectively for prolonging bract longevity and contained less protein or chlorophyll degradation, decrease ACC oxidase or ethylene production than the control. In conclusion, we propose that combined chemical treatment significantly prolonged the bract longevity and more effectively than single chemical treatment at any stage.