• Restorative Dentistry and Endodontics
• /
• v.31 no.4
• /
• pp.290-299
• /
• 2006

Objectives: The purpose of this study is to evaluate the effect of ethylene glycol analogs on modulus of elasticity and ultimate tensile strength of moist, demineralized dentin matrix. Methods: Dentin disks 0.5 mrn thick were prepared from mid-coronal dentin of extracted. unerupted, human third molars. 'I' beam and hour-glass shaped specimens were prepared from the disks, the ends protected with nail varnish and the central regions completely demineralized in 0.5M EDTA for 5 days. Ultimate tensile stress (UTS) and low strain modulus of elasticity (E) were determined with specimens immersed for 60 min in distilled water $(H_{2}O)$, ethylene glycol $(HO-CH_{2}-CH_{2}-OH)$, 2-methoxyethanol $(H_{3}CO-CH_{2}-CH_{2}-OH)$, and 1,2-dimethoxyethane $(H_{3}CO-CH_{2}-CH_{3}-OCH_{3})$ prior to testing in those same media. Modulus of elasticity was measured on the same specimens in a repeated measures experimental design. The results were analyzed with a one-way ANOVA on ranks, followed by Dunn's test at ${\alpha}\;=\;0.05$. Regression analysis examined the relationship between UTS or E and hoy's solubility parameter for hydrogen bonding $({\delta}_{h})$ of each solvent. Results: The UTS of demineralized dentin in water, ethylene glycol, 2-methoxyethanol, and 1,2-dimethoxyethane was 24 (3), 30 (5), 37 (6), and 45 (6) MPa, ${\times}$ (SD) N = 10. Low strain E for the same media were 16 (13), 23 (14), 52 (24), and 62 (22) MPa. Regression analysis of UTS vs ${\delta}_{h}$ revealed a significant $(p\;<\;0.0001,\;r\;=\;-0.99,\;R^{2}\;=\;0.98)$ inverse, exponential relationship. A similar inverse relationship was obtained between low strain E vs ${\delta}_{h}\;(p\;<\;0.0005,\;r\;=\;-0.93,\;R^{2}\;=\;0.86)$. Significance: The tensile properties of demineralized dentin are dependent upon the hydrogen bonding ability of polar solvents $({\delta}_{h})$. Solvents with low ${\delta}_{h}$ values may permit new interpeptide H-bonding in collagen that increases its tensile properties. Solvents with high ${\delta}_{h}$ values prevent the development of these new interpeptide H-bonds.

• The Korean Journal of Mycology
• /
• v.17 no.3
• /
• pp.137-144
• /
• 1989

Effects of incompatibility existing between intra-and interspecies in Pleurotus spp. on protoplast fusion, clamp formation of their fusants and fruitbody production were investigated. Protoplast fusion between intra-and interspecies of the fungus was achieved by Poly ethylene glycol treatment. The fusion frequency between intraspecies was a little higher than that of interspecies. Fusion frequency between interspecies was not correlated with their similarities based on isozyme patterns. In case of protoplast fusion between intra-and interspecies, the fusants from the compatible isolates produced normal fruit bodies, while those from the incompatible isolates did not produce clamp connections and fruit bodies except those of a few isolates presumed mutants.

• Journal of the Korean Applied Science and Technology
• /
• v.35 no.4
• /
• pp.1057-1072
• /
• 2018

In this study, micro-sized $CeO_2$ particles were synthesized by spray pyrolysis, and EG(ethylene glycol) and CA(citric acid) as organic additives were added to obtain hollow and porous particle during spray pyrolysis, and characteristics of obtained ceria were investigated according to the amount of added organic additives. Spray pyrolysis, postheat and ball-milling were combined to give 6 paths. $CeO_2$ nano-sized particle was obtained by the path which has sequence of Spray Pyrolysis with 0.5 M of EG and CA${\rightarrow}$Post-heat${\rightarrow}$Ball-milling${\rightarrow}$Post-heat among 6 paths. The average particle size(24 nm with standard deviation of 3.8 nm) of $CeO_2$ nano-sized particle by TEM analysis is close to the primary particle size(20 nm) which was calculated by Debye-Scherrer equation. To investigate the morphological characteristics and structure of the synthesized nanoparticle powders, SEM(Scanning Electron Microscopy), XRD(X-Ray Diffractometer) and TEM(Transmission Electron Microscopy) were used.

• Journal of Embryo Transfer
• /
• v.22 no.1
• /
• pp.21-26
• /
• 2007

본 연구는 mSOF(modified synthetic oviduct fluid medium) 배양액을 이용하여 $100{\mu}1$와 $10{\mu}1$ 배양 소적에서 일본 흑우의 수정란 생산 효율을 개선하기 위하여 수행하였다. 난구세포가 부착된 미성숙 난자는 각각 단독 배양조건($S;\;10{\mu}1$ 소적) 및 그룹 배양 조건 ($G;\;100{\mu}1$ 소적)에서 실시하였고 배양액은 TCM-199의 기본 배지에 10% FCS, 0.02IU/ml FSH와 $1{\mu}g/ml$ $estradiol-17{\beta}$를 첨가하여 사용하였다. 배반포 단계로 발육한 수정란은 1.5M ethylene glycol로 직접 이식법에 의한 동결 방법으로 동결을 실시하였고, 세포수는 융해 후 생존 수정란에 대해 조사하였다. 체외 배양 시간이 $16{\sim}17$시간 배양 조건에서 난자의 성숙율은 그룹 배양 조건$(27.1{\pm}16.8%)$보다는 단독 배양조건$(57.1{\pm}15.0%)$에서 성숙율이 높았다(p<0.05). 그러나 체외 배양 시간이 $18{\sim}19$ 시간과 $20{\sim}21$시간 배양시는 유사한 성숙율을 보였다. 난자의 체외 배양율은 체외 배양 시간의 증가에 의해 성숙도가 $86.3{\pm}9.9%$로 증가하였다. 접합체(zygote)의 분할율은 단독이나 그룹 배양 조건에서도 유사한 결과를 얻었다. 배반포 발달율은 배양 $7{\sim}8$일째에 조사한 결과 단독 배양 방법보다는 그룹 배양 방법에서 발달율이 높았으나, 분할된 접합체를 기준으로 한 경우 배반포 발달율$(S;\; 21.4{\pm}10.6%,\;G;\;39.0{\pm}13.1%)$에서는 유의적인 차이가 없었다. 단독 배양과 그룹 배양에서 $6.5{\pm}8$일 사이에 배반포로 발달된 수정란의 세포수 조사에서는 유사한 결과를 얻었다. 동결 융해 후 24시간 배양 후 배반포 생존율(5; 24.2%, G; 30.2%), 부화율(S: 20.9%, G: 12.7%) 및 생존 수정란수(S; 45.2%, G: 42.8%)에서도 배양 조건에 따른 유의적인 차는 없었다. 결론적으로 mSOF배양액을 이용하는 경우 미성숙 난자의 체외 성숙 유도 배양 시 단독이나 그룹 배양 시 배반포 발달율에서 그룹간에 유의적인 차가 인정되었다(p<0.01).

• Membrane Journal
• /
• v.15 no.2
• /
• pp.157-164
• /
• 2005

In this study, composite hollow fiber membranes were developed for the recovery of olefin monomers in polyolefin industry off-gases. Polyetherimide (PEI) hollow fiber support membranes were fabricated from spinning solutions containing PEI, NMP and polyethylene glycol (PEG). The influence of dope solution and inner coagulant composition on the permeation properties and structure of hollow fiber supports was examined. PDMS was used as a selective layer and coated on PEI hollow fiber support. The thickness of active layer was controlled by changing coating solution concentration. The permeation properties of hollow fiber supports and composite membranes were characterized with a pure gas permeation test. The optimized composite hollow fiber membrane has $10\;{\mu}m$ selective layer and shows excellent separation performance; the ideal selectivity of olefins over nitrogen is in the following order: 1-butylene (6.4) > propylene (17) > ethylene (97), which selectivity data are similar to the intrinsic olefin/nitrogen selectivities of PDMS. This confirms that the new composite hollow fiber membranes suitable for olefin off-gas recovery has developed successfully.

• Polymer(Korea)
• /
• v.38 no.6
• /
• pp.760-766
• /
• 2014

Bead type super-absorbent resins to be used for release-control were prepared by modification of the inverse suspension polymerization, and their physical properties were characterized. Acrylic acid and acrylamide were used as monomers, and N,N-methylenebisacrylamide was used as crosslinker, controlling the viscosity of monomer solution by adding hydroxyethylcellulose (HEC). SEM studies of the synthesized beads verified that the bead surfaces had many pores with their diameters of several tens nm. The bead sizes were in the range of $500{\sim}3000{\mu}m$, depending on the viscosity of the monomer solution. Both absorbent amount and absorbent rate of the beads were inversely proportional to the bead size, and the maximum water absorbent amount of 1 g beads was determined to be ca. 170~200 g for 5 hrs. The absorbent rate was also dependent on pH change of the aqueous solution, exhibiting the maximum rate in pH ranging from 5 to 11. The absorbent rate decreased as the concentration of salt (NaCl and $MgCl_2$) or ethanol and ethylene glycol increased. Release time of the water absorbed into the bead resins was 700 hrs, confirming the usefulness of the resin for the good release-control materials.