• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.1
• /
• pp.98-105
• /
• 2007

In this paper, we propose a timing detector using suboptimal maximum likelihood method. The proposed method has an simple reference signal generator. Additionally, timing detector's gain of the proposed method is the same to Early-Late gate and ML method. We reveal that tracking range of time tracker is narrow because of using data-decision, that is, tracking range is ${\pm}0.06ns$ for the 4-order Gaussian monocycle with 0.7ns pulse width. Therefore we can find that searcher must have very accurate acquisition procedure. When estimating a performance of time tracker, we consider a jitter in transmitter and receiver's pulse generation process as well as background noise. By using computer simulation, we propose mean/variance of timing detector and tracking process. Also we consider a mobility in tracking process, i.e., timing error modeled ramp function. In order to propose a performance of time tracker, we consider only one correlation demodulator.

• Journal of Korean Society of Forest Science
• /
• v.11 no.1
• /
• pp.25-32
• /
• 1970

Site-index curves for Pinus densiflora Sieb. et Zucc. grown in the middle part of Korea were developed from stem analysis data by a procedure of guide curve equation $Yt=K-ab^t$ (t=0, 1, 2, ${\cdots}{\cdots}$) and shown in Fig. 2. The stand density expressed as size-number criteria was calculated and the relation of number of tree per hectare and average DBH was presented in Fig. 3, in which soil fertility showed little effect. When this is compared to Reineke's density standards, the Pinus densiflora stand ranks high level of stocking density (Fig. 5). As a measure for estimating timber volume, the angle-summation technique revealed to result wider variation. Constructing hypothetical populations for appraising angle-summation technique, the significance of its application in silvicultural and ecological research are discussed.

• Journal of the Korean Society of Safety
• /
• v.25 no.6
• /
• pp.47-52
• /
• 2010

Many industrial accidents have occurred over the years in the manufacturing and construction industries in Korea. However, as the service industry has increased continuously, the share of the accident rate in the service industry was 39.07% in 2009, while the manufacturing industry share was 33.73%. The service industry share overtook the manufacturing industry share for the first time. Therefore, this research considers prevention of industrial accidents in the service industry as well as manufacturing and construction industries. This paper describes a procedure and a method to estimate efficient accident rate forecasting and estimated zero accident time in the service industry in order to prevent industrial accidents in the transportation, storage, and telecommunication divisions. This paper proposes a model using an analytical function for the sake of very efficient accident rate forecasting. Accordingly, this paper has develops a program for accident rate forecasting, zero accident time estimating, and calculation of achievement probability through MFC (Microsoft Foundation Class) software Visual Studio 2008 in the transportation, storage, and telecommunication divisions. In results of this paper, ARIMA (Auto Regressive Integrating Moving Average) is regarded as a very efficient forecasting model for the transportation, storage, and telecommunication division. In testing this model, value minimizing the Sum of Square Errors (SSE) was calculated as 0.2532. Finally the results of this paper are sure to help establish easy accident rate forecasting and strategy or method of zero accident time in the service industry for prevention of industrial accidents.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.8 no.3
• /
• pp.97-103
• /
• 2004

Most of the columns in centrally braced steel frame buildings are usually designed as the gravity columns to reduce connection cost. For a rational seismic performance evaluation of centrally braced steel frame buildings, it is important to properly incorporate in the analysis  the P-${\Delta}$ effects arising from the gravity columns. An effective scheme for the P-${\Delta}$ effects modeling due to the gravity columns was illustrated based on the concept of fictitious leaning column. Seismic performance evaluation of inverted V braced steel frames with or without P-${\Delta}$ effects modeling was conducted by following the FEMA 273 NSP (Nonlinear Static Procedure). The problem in estimating dynamic P-${\Delta}$ modification factor (C3) in FEMA 273 was discussed. The results of this study indicated that the P-${\Delta}$ effects should be included in the seismic performance evaluation of centrally braced steel frames. This study also showed that the inverted V braced frames, retrofitted by applying the tie bars to redistribute the inelastic demand over the height of the building, exhibit significantly improved seismic performance.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.34 no.3
• /
• pp.245-250
• /
• 2010

The procedure for estimating the gas (rotational) temperature of an air discharge in supersonic flows is presented in detail. Since direct measurement of the temperature in a supersonic flow is difficult, a nonintrusive measurement was performed by optical emission spectroscopy based on the emission spectra of nitrogen molecular ions. A detailed explanation, including the equations for emission line intensity, is presented in order to understand the structure of the emission spectra of nitrogen molecular ions. Using the obtained representation for emission spectrum, a synthetic spectrum of the first negative system of $N_2^+$ is obtained, and it is compared with the experimentally measured spectrum. Within a relative error of approximately 6.8% for the overall band spectra, the synthetic and measured spectra agree well. In the case of a 25-mA DC air discharge in a supersonic (Mach 3) flow, the gas temperature profile shows an approximately linear variation and a peak temperature of approximately 350 K.

• Journal of the Korean Society of Safety
• /
• v.27 no.6
• /
• pp.192-204
• /
• 2012

For a severe accident of nuclear power plant, an approach to estimation of the radiological source term using a severe accident code(MELCOR) has been proposed. Although the MELCOR code has a capability to estimate the radiological source term, it has been hardly utilized for the radiological consequence analysis mainly due to a lack of understanding on the relevant function employed in MELCOR and severe accident phenomena. In order to estimate the severe accident source term to be linked with the radiological consequence analysis, this study proposes 4-step procedure: (1) selection of plant condition leading to a severe accident(i.e., accident sequence), (2) analysis of the relevant severe accident code, (3) investigation of the code analysis results and post-processing, and (4) generation of radiological source term information for the consequence analysis. The feasibility study of the present approach to an early containment failure sequence caused by a fast station blackout(SBO) of a reference plant (OPR-1000), showed that while the MELCOR code has an integrated capability for severe accident and source term analysis, it has a large degree of uncertainty in quantifying the radiological source term. Key insights obtained from the present study were: (1) key parameters employed in a typical code for the consequence analysis(i.e., MACCS) could be generated by MELCOR code; (2) the MELOCR code simulation for an assessment of the selected accident sequence has a large degree of uncertainty in determining the accident scenario and severe accident phenomena; and (3) the generation of source term information for the consequence analysis relies on an expert opinion in both areas of severe accident analysis and consequence analysis. Nevertheless, the MELCOR code had a great advantage in estimating the radiological source term such as reflection of the current state of art in the area of severe accident and radiological source term.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.27 no.3
• /
• pp.449-457
• /
• 2017

In this paper, we analyze the security and performance of the Quantis Quantum random number generator in terms of cryptography through experiments. The Quantis' post-processing is designed to output full-entropy via bit-matrix-vector multiplication based on mathematical background, and we used the min-entropy estimating test of NIST SP 800-90B so as to verify whether the output is full-entropy. Quantis minimizes the effect on the random bit rate by using an optimization technique for bit-matrix-vector multiplication, and compared the performance to conditioning functions of NIST SP 800-90B by measuring the random bit rate. Also, we have distinguished what is in Quantis' post-processing to the standard model of NIST in USA and BSI in Germany, and in case of applying Quantis to cryptographic systems in accordance with the CMVP standard, it is recommended to use the output of Quantis as the seed of the approved DRBG.

• Journal of the Society of Disaster Information
• /
• v.9 no.1
• /
• pp.1-10
• /
• 2013

The main objective of this research is to develop the Mechanistic-Empirical (M-E) guidelines for evaluating the capacity of existing highways to sustain route overweight truck traffic over a specified performance period due to a growing concern on the impact of increasing overweight truck loads on highways. In this study, a two-stage framework was developed for this purpose. Level I procedure involves the use of pavement evaluation charts to identify the best possible route from among the alternatives considered and to determine what additional tests and analyses are needed as a screening tool. Level II involves the application of the Overweight Truck Route Analysis (OTRA) program to evaluate the structural adequacy of an existing route to carry routine overweight truck traffic over the specified performance period along with estimating asphalt concrete overlay thickness, if necessary.

• The KIPS Transactions:PartB
• /
• v.13B no.2 s.105
• /
• pp.89-96
• /
• 2006

In this paper, we propose two approaches for the character segmentation on Korean document images. One is an improved version of a projection profile-based algorithm. It involves estimating the number of characters, obtaining the split points and then searching for each character's boundary, and selecting the best segmentation result. The other is developed for low quality document images where adjacent characters are connected. In this case, parts of the projection profile are cut to resolve the connection between the characters. This is called ${\alpha}$-cut. Afterwards, the revised former segmentation procedure is conducted. The two approaches have been tested with 43,572 low-quality Korean word images punted in various font styles. The segmentation accuracies of the former and the latter are 91.81% and 99.57%, respectively. This result shows that the proposed algorithm using a ${\alpha}$-cut is effective for low-quality Korean document images.

• Tunnel and Underground Space
• /
• v.30 no.1
• /
• pp.15-28
• /
• 2020

In this study, a procedure was introduced to estimate strength and deformation modulus of the 3-D discrete fracture network(DFN) systems using the distinct element method(DEM). Fracture entities were treated as non-persistent square planes in the DFN systems. Systematically generated fictitious fractures having similar mechanical characteristics of intact rock were combined with non-persistent real fractures to create polyhedral blocks in the analysis domain. Strength and deformation modulus for 10 m cube domain of various deterministic and stochastic 3-D DFN systems were estimated using the DEM to explore the applicability of suggested method and to examine the effect of fracture geometry on strength and deformability of DFN systems. The suggested procedures were found to effective in estimating anisotropic strength and deformability of the 3-D DFN systems.