• Korean Journal of Construction Engineering and Management
• /
• v.10 no.2
• /
• pp.65-74
• /
• 2009

It is expected that the number of apartment complexes in Korea that are over 20 years old will rapidly increase to more than 3,500,000. Consequently, the remodeling of these buildings is being revitalized throughout the country. Among the requirements for such remodeling, the expansion of parking lots has considerable weight. When enlarging a parking lot, the access route from an underground floor to the main building (i.e., the means of entry into the main building) determines the possibility of vertical enlargement for elevators, the size of the parking lot, the construction period, and construction expenses, etc. When enlarging an underground parking lot of an apartment complex, the access between the main building and the parking lot, as well as the inhabitants' requirements for entering the main building, are generally determined based on the designer's experience, rather than on the exact estimation of the peculiarity of the complex. In order to resolve such a problem, when enlarging an underground parking lot, a systematic and rational method is needed for selecting the means of entry into the main building. In this study, a selection model is derived for the method of selecting an access route into the main building when constructing an underground parking lot, in order to provide a reasonable decision-making process. A research method was investigated for determining the access route into the main building when enlarging a parking lot. On the basis of research carried out through in-depth interviews with experts, the characteristics for each means of entry into the main building were analyzed and the factors affecting the selection of the access route were deduced. The affecting factors selected were construction efficiency, convenience efficiency and economic efficiency. Weight values were then estimated for the selected affecting factors by applying the AHP method. Results showed that convenience efficiency, which gained the highest value, is the most important factor in selecting the means of entry into the main building. The most suitable means of entry into the main building was also suggested after estimating the applicability of the site by selecting complexes with remodeling possibility. This study will be applied as a reference for selecting the means of entry into the main building when constructing an underground parking lot particularly for older apartment complexes.

• Journal of the Korean Chemical Society
• /
• v.45 no.6
• /
• pp.555-561
• /
• 2001

Vinyl acetate usually used in PVA resin preparation was converted to PVAc by bulk polymerization using AIBN as a initiator and PVA was synthesized by changing the concentration of NaOH added for saponification subsequently. As a result of estimating molecular weight using GPC, molecular weight increased as the NaOH concentration increased to 2.5 N, 5.0 N, 7.5 N and 10.0 N and polydispersity had similar values of 2.1~2.3, however, showed slightly decreasing tendency. In addition, PVA saponificated by 10.0 N-NaOH showed high syndiotacticity in observation of tacticity using NMR spectroscopy. From this fact, the degree of tacticity was predicted to be high and it was in good agreement with the tendency of polydispersity by GPC. Also, from the result of FT-IR spectroscopy, it might be known that hydrolysis was more promoted in the PVA with 10.0 N-NaOH than other NaOH concentration. Intrinsic viscosity measured using Ubbelohde viscometer, which increased as the concentration of NaOH added for saponification increased. The change of shear strength with the change of shear rate was investigated using Brookfield viscometer, in consequence, viscosity of PVA synthesized decreased as shear rate increased. PVA solution confirmed to show the shear thining behavior by Casson plot and PVA with 10.0 N-NaOH had the largest yield value. DSC measurement was performed to know the thermal properties of PVA. Tp had nearly constant value of 214$^{\circ}C$ in all cases except for adding 2.5 N-NaOH and $\Delta$H was increased as the concentration of NaOH increased. From this properties, it was concluded that the degree of hydrogen bonding was proportional to the added concentration of NaOH and the increase of the degree of hydrogen bonding and hydrophobic interaction could affect the rheological and thermal properties of title compound.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.35 no.4
• /
• pp.408-416
• /
• 2002

A 3D hydrodynamic-ecological coupled model was applied to estimate carrying capacity in Geoje-Hansan Bay where is one of the most important oyster culturing grounds in Korea. We considered the carrying capacity as the difference between food supply to the oysters and food demand, considering monthly difference of the actual growth. The food supply to the system was determined from the results of the model simulation (tidal exchange and chlorophyll $\alpha$) over the culturing period from September to May of the following year. The food demand was estimated from the food concentration (chlorophyll $\alpha$) multiple the filtration rate of oysters that is considered monthly different growth rate of oysters and food concentration. The values of carrying capacity for the system varied from 6.1 ton/ha (minimum carrying capacity) in february to 14.91 ton/ha (maximum carrying capacity) in April of marketable size oysters (>4 g wet-tissue weight) depending on temporal variations in the food supply. The oyster production calculated from present facilities was 9 ton/ha in wet-tissue weight in Geoje-Hansan Bay. This value corresponded to $60\%$ of maximum carrying capacity of the system. The optimal carrying capacity without negatively affecting on oyster production was 5.5 ton/ha when calculated from annual statistic data and 6.1 ton/ha when determined by this study. These results suggest that it must be reduced $32\%$~$39\%$ of oyster facilities in the system.

• Journal of Nutrition and Health
• /
• v.53 no.3
• /
• pp.319-328
• /
• 2020

Purpose: This study was conducted to evaluate the validity of the Gene-Health application in terms of estimating energy and macronutrients. Methods: The subjects were 98 health adults participating in a weight-control intervention study. They recorded their diets in the Gene-Health application, took photographs before and after every meal on the same day, and uploaded them to the Gene-Health application. The amounts of foods and drinks consumed were estimated based on the photographs by trained experts, and the nutrient intakes were calculated using the CAN-Pro 5.0 program, which was named 'Photo Estimation'. The energy and macronutrients estimated from the Gene-Health application were compared with those from a Photo Estimation. The mean differences in energy and macronutrient intakes between the two methods were compared using paired t-test. Results: The mean energy intakes of Gene-Health and Photo Estimation were 1,937.0 kcal and 1,928.3 kcal, respectively. There were no significant differences in intakes of energy, carbohydrate, fat, and energy from fat (%) between two methods. The protein intake and energy from protein (%) of the Gene-Health were higher than those from the Photo Estimation. The energy from carbohydrate (%) for the Photo Estimation was higher than that of the Gene-Health. The Pearson correlation coefficients, weighted Kappa coefficients, and adjacent agreements for energy and macronutrient intakes between the two methods ranged from 0.382 to 0.607, 0.588 to 0.649, and 79.6% to 86.7%, respectively. Conclusion: The Gene-Health application shows acceptable validity as a dietary intake assessment tool for energy and macronutrients. Further studies with female subjects and various age groups will be needed.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.51 no.2
• /
• pp.1-11
• /
• 2023

This study intended to develop a technique for quantitatively and 3-dimensionally predicting the potential failure zone and impulse that may occur when trees are fall down. The main outcomes of this study are as follows. First, this study established the potential failure zone and impulse calculation formula in order to quantitatively calculate the risks generated when trees are fallen down. When estimating the potential failure zone, the calculation was performed by magnifying the height of trees by 1.5 times, reflecting the likelihood of trees falling down and slipping. With regard to the slope of a tree, the range of 360° centered on the root collar was set in the case of trees that grow upright and the range of 180° from the inclined direction was set in the case of trees that grow inclined. The angular momentum was calculated by reflecting the rotational motion from the root collar when the trees fell down, and the impulse was calculated by converting it into the linear momentum. Second, the program to calculate a potential failure zone and impulse was developed using Rhino3D and Grasshopper. This study created the 3-dimensional models of the shapes for topography, buildings, and trees using the Rhino3D, thereby connecting them to Grasshopper to construct the spatial information. The algorithm was programmed using the calculation formula in the stage of risk calculation. This calculation considered the information on the trees' growth such as the height, inclination, and weight of trees and the surrounding environment including adjacent trees, damage targets, and analysis ranges. In the stage of risk inquiry, the calculation results were visualized into a three-dimensional model by summarizing them. For instance, the risk degrees were classified into various colors to efficiently determine the dangerous trees and dangerous areas.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.8 no.3
• /
• pp.190-198
• /
• 2006

Radiation use efficiency (RUE), the amount of biomass produced per unit intercepted photosynthetically active radiation (PAR), constitutes a main part of crop growth simulation models. The objective of the present study was to evaluate the variation of RUE of rice plants under various nitrogen nutritive conditions. from 1998 to 2000, shoot dry weight (DW), intercepted PAR of rice canopies, and nitrogen nutritive status were measured in various nitrogen fertilization regimes using japonica and Tongil-type varieties. These data were used for estimating the average RUEs before heading and the relationship between RUE and the nitrogen nutritive status. The canopy extinction coefficient (K) increased with the growth of rice until maximum tillering stage and maintained constant at about 0.4 from maximum tillering to heading stage, rapidly increasing again after heading stage. The DW growth revealed significant linear correlation with the cumulative PAR interception of the canopy, enabling the estimation of the average RUE before heading with the slopes of the regression lines. Average RUE tended to increase with the increased level of nitrogen fertilization. RUE increased approaching maximum as the nitrogen nutrition index (NNI) calculated by the ratio of actual shoot N concentration to the critical N concentration for the maximum growth at any growth stage and the specific leaf nitrogen $(SLN;\;g/m^2\;leaf\;area)$ increased. This relationship between RUE (g/MJ of PAR) and N nutritive status was expressed well by the following exponential functions: $$RUE=3.13\{1-exp(-4.33NNNI+1.26)\}$$ $$RUE=3.17\{1-exp(-1.33SLN+0.04)\}$$ The above equations explained, respectively, about 80% and 75% of the average RUE variation due to varying nitrogen nutritive status of rice plants. However, these equations would have some limitations if incorporated as a component model to simulate the rice growth as they are based on relationships averaged over the entire growth period before heading.

• Journal of Food Hygiene and Safety
• /
• v.37 no.3
• /
• pp.143-148
• /
• 2022

This study was to investigate an analytical method for determining dieckol content in Ecklonia stolonifera extract. According to the guidelines of International Conference on Harmonization. Method validation was performed by measuring the specificity, linearity, precision, accuracy, limit of detection (LOD), and limit of quantification (LOQ) of dieckol using high-performance liquid chromatography-photodiode array. The results showed that the correlation coefficient of calibration curve (R²) for dieckol was 0.9997. The LOD and LOQ for dieckol were 0.18 and 0.56 ㎍/mL, respectively. The intra- and inter-day precision values of dieckol were approximately 1.58-4.39% and 1.37-4.64%, respectively. Moreover, intra- and inter-day accuracies of dieckol were approximately 96.91-102.33% and 98.41-105.71%, respectively. Thus, we successfully validated the analytical method for estimating dieckol content in E. stolonifera extract.

• Korean Journal of Organic Agriculture
• /
• v.14 no.4
• /
• pp.385-397
• /
• 2006

This study was conducted to establish the environment-friendly cropping system of soybean in paddy field with different soil textures. When the soybean was cultivated in paddy fields, growth responses of testing cultivars varied depending on soil texture and cultivation method. Growth responses of soybean in sandy loam tended to be better than those in clay, however the effect of high ridged cultivation was distinguished in clay loam. Especially, formation of rhizome nodule was significantly different depending on soils ; more numerous rhizome nodules were formed in sandy loam compared to that in clay. Plant heights of Taekwangkong and Eunhakong were highest in clay and sandy loam, respectively, while the number of pods and branches of Eunhakong were most in both soils. In clay paddy field, growth responses of Eunhakong were best among the testing cultivars, however high ridged cultivation was more appropriate to the cultivar compared to level row cultivation regardless of soils. Taekwangkong showed the highest leaf area indexes during whole growth stages. Leaf development of Daewonkong was suppressed in clay at early growth stage, while it significantly increased as growth stages progressed. Most retard leaf development was observed in early maturity cultivar, Hwaseongputkong, since it seemed to be seriously damaged by excess-moisture injury in both soils. Comparing the dry weight of top plants and roots, plant growth was more affected by soil texture than cultivation methods at early vegetative growth stage, via verses at R2 or R5 stages. In yield characters and yields at R8 maturity stage, pods number of Eunhakong was significantly higher than those of Daewonkong and Taekwangkong estimating to 107 and 124 in clay and sandy loam, respectively. The ratio of ripened seeds was highest in sandy loam in combination with high ridged cultivation, while the lowest in clay with level row. The yields of Deawonkong and Eunhakong were higher compared to other testing cultivars ranged from $l82{\sim}286kg/ha$ depending on soils and cultivation methods. In results, growth responses and yields of testing cultivars tended to be higher in sandy loam in combination with high ridge compared to clay with level row.

• Journal of Animal Science and Technology
• /
• v.46 no.5
• /
• pp.719-728
• /
• 2004

The aims of this study were to estimate genetic parameters for carcass traits on Hanwoo(Korean Native Cattle) and to compare two different statistical algorithms for estimating genetic parameters. Data obtained from 1526 steers at Hanwoo Improvement Center and Hanwoo Improvement Complex Area from 1996 to 2001 were used for the analyses. The carcass traits considered in these studies were carcass weight, dressing percent, eye muscle area, backfat thickness, and marbling score. Estimated genetic parameters using EM-REML algorithm were compared to those by Bayesian inference via Gibbs Sampling to find out statistical properties. The estimated heritabilities of carcass traits by REML method were 0.28, 0.25, 0.35, 0.39 and 0.51, respectively and those by Gibbs Sampling method were 0.29, 0.25, 0.40, 0.42 and 0.54, respectively. This estimates were not significantly different, even though the estimated heritabilities by Gibbs Sampling method were higher than ones by REML method. Since the estimated statistics by REML method and Gibbs Sampling method were not significantly different in this study, it is inferred that both mothods could be efficiently applied for the analysis of carcass traits of cattle. However, further studies are demanded to define an optimal statistical method for handling large scale performance data.

• Journal of Animal Science and Technology
• /
• v.54 no.2
• /
• pp.83-87
• /
• 2012

The purpose of this study was to estimate genetic parameters for productive traits in swine. Productive traits were considered on average daily gain (ADG), body height (BH) and body length (BL). Genetic analysis was consisted of 18,668 heads for productive traits which were based on on-farm performance tested from May, 2007 to Apr, 2011. For estimating genetic parameters on productive traits, single best model was fitted after finding source of variance on fixed and random effects and estimated with a multiple trait animal model by using DF-REML (Derivative-Free Restricted Maximum Likelihood). The estimated heritabilities of Duroc, Berkshire, Landrace and Yorkshire 0.22-0.58 for the average daily gain, 0.34-0.41 for the body height and 0.4-0.52 for the body length, respectively. Phenotypic correlations of average daily gain with body height and body length for the four breeds were 0.42-0.48, 0.53-0.58, 0.34-0.46 and 0.47-0.56, respectively. Phenotypic correlations of body height with body length were 0.41, 0.57, 0.52, 0.59, respectively. The estimated genetic correlation coefficients of average daily gain with body height and body length estimated for the four breeds were 0.34-0.47, 0.70-0.75, 0.17-0.38 and 0.50-0.53, respectively. The estimated genetic correlation coefficients of body height with body length were 0.57, 0.69, 0.61 and 0.71, respectively.