• Journal of agricultural medicine and community health
• /
• v.36 no.2
• /
• pp.120-129
• /
• 2011

The purposes of this study were to measure health related quality of life (HRQOL) of persons disabled by stroke dwelling in Gyeongju-si using EQ-5D and to estimate total QALYs loss of persons disabled by stroke in Korea. The eligible subjects were 982 persons with stroke aged 50 and over in Gyeongju-si disabled registry, as of March, 2008. Interviewers measured HRQOL of study subjects using EQ-5D. EQ-5D index, utility weight, was derived from the Korean valuation set. In order to compare the results of this study, we selected two comparison groups representing Korean healthy population and general population of Korean using the 4th Korean National Health & Nutrition Examination Survey. Finally, after age and gender standardization, we estimated the total QALYs losses of persons disabled by stroke in Korea. Of 982 eligible subjects, 566 persons participated in the survey (response rate: 57.6%). In both of female and male, utility weights in the 70s or 80s were lower than those of the 50s or 60s. Utility weights differences among persons with disability, general population, and healthy population in male were larger than those differences in female. Total estimated QALY losses of persons disabled by stroke were 67,011.6 QALYs lower than healthy control group and 54,167.1 QALYs lower than general population, respectively.

• Research in Plant Disease
• /
• v.17 no.3
• /
• pp.317-325
• /
• 2011

Bacterial pustule of soybean (Glycine max) caused by Xanthomonas axonopodis pv. glycines is one of the most prevalent bacterial diseases of soybean in Korea, where it causes considerable yield loss. This study was carried out to develop yield prediction model for bacterial pustule by analyzing correlation between the percentage of diseased leaf area and yield. The severe disease incidence of soybean bacterial pustule caused yield losses by 19.8% in 2006 and 16.8% in 2007, respectively. Severity of bacterial pustule greatly affected on 100 seed weight and yield, but did not on stem length, number of branches per plant, number of pods per plant, number of seeds per plant. On the other hand, correlation coefficients between diseased leaf area and yield were $-0.93^*$('06) and $-0.77^*$('07), respectively. The regression equation obtained by analyzing correlation between the percentage of diseased leaf area and yield loss in 2006 and in 2007 was y = -3.2914x + 348.19($R^2$ = 0.8603) and y = -2.9671x + 302.08($R^2$ = 0.9411), respectively. These results will be helpful in estimating losses on a field-scale and thereby predicting the production of soybean.

• Journal of the Korean Geotechnical Society
• /
• v.40 no.4
• /
• pp.61-68
• /
• 2024

Monitoring the injection degree of biopolymers in soils is required in estimating the performance of biopolymer-treated grounds. In this study, the degree of saturation and injection process of biopolymer solutions in sandy soils were evaluated using electrical resistivity. To assess the changes in electrical resistivity according to the contents of the biopolymer solutions, electrical resistivities were measured for Jumunjin sand-xanthan gum biopolymer solution (weight concentration of 0.5%) mixtures with different degrees of saturation of 20%, 40%, 60%, 80%, and 100%. In addition, electrical resistivities were measured at eight layers in oven-dried Jumunjin sand during the upward injection of the xanthan gum biopolymer solution to monitor the injection process. Experimental results showed that the electrical resistivity decreased as the degree of saturation of the mixture increased, and their relationship was constructed. During the injection of the xanthan gum biopolymer solution into the sandy soils, the electrical resistivity decreased and converged and the degree of saturation at each layer could be estimated on the basis of the above-constructed relationship. This study demonstrated that electrical resistivity may be an effective physical property for monitoring the injection degree of biopolymer solutions in the ground.

• Journal of Environmental Health Sciences
• /
• v.43 no.3
• /
• pp.223-232
• /
• 2017

Objectives: In response to increased interest in the safety of children's products, a risk management system is being prepared through exposure assessment of hazardous chemicals. To estimate exposure levels, risk assessors are using deterministic and probabilistic approaches to statistical methodology and a commercialized Monte Carlo simulation based on tools (MCTool) to efficiently support calculation of the probability density functions. This study was conducted to analyze and discuss the usage patterns and problems associated with the results of these two approaches and MCTools used in the case of probabilistic approaches by reviewing research reports related to exposure assessment for children's products. Methods: We collected six research reports on exposure and risk assessment of children's products and summarized the deterministic results and corresponding underlying distributions for exposure dose and concentration results estimated through deterministic and probabilistic approaches. We focused on mechanisms and differences in the MCTools used for decision making with probabilistic distributions to validate the simulation adequacy in detail. Results: The estimation results of exposure dose and concentration from the deterministic approaches were 0.19-3.98 times higher than the results from the probabilistic approach. For the probabilistic approach, the use of lognormal, Student's T, and Weibull distributions had the highest frequency as underlying distributions of the input parameters. However, we could not examine the reasons for the selection of each distribution because of the absence of test-statistics. In addition, there were some cases estimating the discrete probability distribution model as the underlying distribution for continuous variables, such as weight. To find the cause of abnormal simulations, we applied two MCTools used for all reports and described the improper usage routes of MCTools. Conclusions: For transparent and realistic exposure assessment, it is necessary to 1) establish standardized guidelines for the proper use of the two statistical approaches, including notes by MCTool and 2) consider the development of a new software tool with proper configurations and features specialized for risk assessment. Such guidelines and software will make exposure assessment more user-friendly, consistent, and rapid in the future.

• Asian-Australasian Journal of Animal Sciences
• /
• v.31 no.4
• /
• pp.473-479
• /
• 2018

Objective: The study was designed to perform a genome-wide association (GWA) and partitioning of genome using Illumina's PorcineSNP60 Beadchip in order to identify variants and determine the explained heritability for the total number of teats in Yorkshire pig. Methods: After screening with the following criteria: minor allele frequency, $MAF{\leq}0.01$; Hardy-Weinberg equilibrium, $HWE{\leq}0.000001$, a pair-wise genomic relationship matrix was produced using 42,953 single nucleotide polymorphisms (SNPs). A genome-wide mixed linear model-based association analysis (MLMA) was conducted. And for estimating the explained heritability with genome- or chromosome-wide SNPs the genetic relatedness estimation through maximum likelihood approach was used in our study. Results: The MLMA analysis and false discovery rate p-values identified three significant SNPs on two different chromosomes (rs81476910 and rs81405825 on SSC8; rs81332615 on SSC13) for total number of teats. Besides, we estimated that 30% of variance could be explained by all of the common SNPs on the autosomal chromosomes for the trait. The maximum amount of heritability obtained by partitioning the genome were $0.22{\pm}0.05$, $0.16{\pm}0.05$, $0.10{\pm}0.03$ and $0.08{\pm}0.03$ on SSC7, SSC13, SSC1, and SSC8, respectively. Of them, SSC7 explained the amount of estimated heritability along with a SNP (rs80805264) identified by genome-wide association studies at the empirical p value significance level of 2.35E-05 in our study. Interestingly, rs80805264 was found in a nearby quantitative trait loci (QTL) on SSC7 for the teat number trait as identified in a recent study. Moreover, all other significant SNPs were found within and/or close to some QTLs related to ovary weight, total number of born alive and age at puberty in pigs. Conclusion: The SNPs we identified unquestionably represent some of the important QTL regions as well as genes of interest in the genome for various physiological functions responsible for reproduction in pigs.

• Animal Bioscience
• /
• v.34 no.10
• /
• pp.1643-1652
• /
• 2021

Objective: Two experiments were conducted to provide a new approach for evaluating feed nutritional value by metabolizable glucose (MG) in piglet diets with different levels of starch and crude fiber. In Exp 1, a regression equation for MG was generated. In Exp 2, the equation was verified, and the optimal growth performance of piglets under appropriate MG levels was tested. Methods: In Exp 1, 20 weaned piglets (7.74±0.81 kg body weight [BW]) were randomly assigned to 1 of 4 treatments, including the basal diet containing different levels of MG (starch, 25.80%, 31.67%, 45.71%, 49.36%; crude fiber, 1.23%, 1.35%, 1.80%, 1.51%). The piglets were implanted with an ileal fistula, cannulation of the carotid artery, portal vein, and mesenteric artery. The chyme from the ileum fistula and blood samples were collected. In Exp 2, 30 weaned piglets (8.96±0.50 kg BW) were randomly assigned to 1 of 5 treatments, including the experimental diets with different levels of MG (37.6, 132.5, 300.0, 354.3, and 412.5 g/kg). The piglets' BW, and feed consumption were recorded to calculate growth performance during the 28-d experiment. Results: In Exp 1, the MG levels in 4 diets were 239.62, 280.68, 400.79, and 454.35 g/kg. The regression equation for the MG levels and dietary nutrients was: Y (MG) = 12.13×X₁ (starch)+23.18×X₂ (crude fiber)-196.44 (R² = 0.9989, p = 0.033). In Exp 2, treatments with 132.5 and 300.0 g/kg MG significantly (p<0.05) increased average daily gain and feed conversion efficiency of weaned piglets, increased digestibility of crude fat, and had no effect on digestibility of crude protein compared to 300.0 to 412.5 g/kg MG. Conclusion: The pig model combining the ileum fistula and cannulation of blood vessels was successfully used to determine the dietary MG levels. The recommended MG level in weaned pig diets is 132.5 to 300.0 g/kg.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.36 no.6
• /
• pp.355-364
• /
• 2023

The arbitrary Lagrangian-Eulerian (ALE) method has been extensively researched owing to its capability to accurately predict the propagation of blast shock waves. Although the use of the ALE method for dynamic analysis can produce unreliable results depending on the mesh size of the finite element, few studies have explored the relationship between the mesh size for the air domain and the accuracy of numerical analysis. In this study, we propose a procedure to calculate the optimal mesh size based on the mean squared error between the maximum blast pressure values obtained from numerical simulations and experiments. Furthermore, we analyze the relationship between the weight of explosive material (TNT) and the optimal mesh size of the air domain. The findings from this study can contribute to estimating the optimal mesh size in blast simulations with various explosion weights and promote the development of advanced blast numerical analysis models.

• Journal of the Korea Concrete Institute
• /
• v.17 no.6 s.90
• /
• pp.931-938
• /
• 2005

When concrete structures are exposed under marine condition for a long time, the steel in concrete is corroded due to the ingression of chlorides in the seawater. Because the damages of corrosion resulting from the chloride ion are very serious, many researches have been performed. Silver nitrate colormetric method that can measure easily penetration depth of chloride ion has been executed, recent)y. However, characteristics of silver nitrate colormetric method were not fully examined. Therefore, the objective of this paper Is to study the applicability of colormetric method. For the purpose of this, effect factors and reaction mechanism of colormetric method were investigated, and the colormetric method is applied for marine concrete structures. According to the results of silver nitrate colored method, two reactions such as white reaction of AgCl and brown reaction of AgOH were shown when $AgNO_3$ was sprayed in splited section. And velocity constant ratio(K) of two reactions appeared that white reaction, AgCl reacts with the fast speed by 3240. When the colormetric method was applied in concrete, it is reasonable that $AgNO_3$ solution more than 0.05N concentration was sprayed. It is confirmed that the colormetric method is useful tool for estimating the chloride of concrete structures in situ. The average chloride amount of colored parts indicates $0.9kg/m^3$ per concrete unit weight.

• Journal of Veterinary Clinics
• /
• v.31 no.3
• /
• pp.175-179
• /
• 2014

The purpose of this study was to determine and compare prostate size using ultrasound and computed tomography (CT). The prostate gland was evaluated in eight normal Beagle dogs. Length, depth, and width of the prostate gland were measured by ultrasound and volume of the prostate was obtained from the two ellipsoid formula (US1, US2). Height, length, width, area, and volume of the prostate gland were measured by CT. Ratios of prostatic height, length, and width to the sixth lumbar vertebral body length were calculated. There was no significant difference between the US1 and US2 method, and between US2 and CT method, respectively. The prostatic volume calculated by US1 method was significantly lower than those with CT (p=0.029). The Upper limits of ratios of prostate length, height, and width to the length of the sixth lumbar vertebra were 1.3, 1.1, and 1.7, respectively. Among these prostate dimensions, prostate length and height could be a useful index in estimating prostate size regardless of body weight.

• The Journal of Korean Medicine
• /
• v.35 no.1
• /
• pp.88-98
• /
• 2014

Objectives: The purpose of this study is to investigate the relationship between bone age, chronological age, anthropometric parameters, and diagnosed pulse rate on child-adolescence's growth according to sex and the revelation of secondary sexual characteristics. Methods: Growth-concerned 44 children and adolescence (from 6 to 16 years) were analyzed in retrospective study. They visited Korean Medical Clinic in Suwon, Korea from January 2012 to October 2013. Individual bone age (BA), chronological age (CA), Risser sign, anthropometric parameters, and pulse rate were measured. The correlations of each variable were done by Pearson analysis, Spearman analysis and Regression analysis. Results: 1. The female group was shown to have stronger negative correlation between pulse rate and BA, CA than the male group. In gender analysis, the female group showed negative correlation between weight and pulse rate. 2. In a further analysis according to the revelation of secondary sexual characteristics, the group of child-adolescent without secondary sexual characteristics was shown to have stronger negative correlation between pulse rate and BA, CA than the group with secondary sexual characteristics. The height percentile and pulse rate were negative correlation in secondary sexual character being. 3. The Risser sign and pulse rate were not correlated in this study. Conclusions: These findings suggested that a regular and continual measurement of pulse rate is effective in estimating potential for growth in child-adolescent group.