• Ocean and Polar Research
• /
• 제32권3호
• /
• pp.229-236
• /
• 2010

A study was conducted to investigate the effect of water temperature and photoperiod on the oxygen consumption of the fasting juvenile Pacific cod Gadus macrocephalus (mean body weight 79.9${\pm}$2.0 g) in order to quantify metabolic response of the species under given conditions. The oxygen consumption rate (OCR) of G. macrocephalus was measured under a combination of four different water temperatures (7, 10, 13 and $16^{\circ}C$) and three different photoperiods (24L:0D, 12L:12D and 0L:24D) with an interval of 5 minutes over a 24-hour period using a closed recirculating respirometer. Three replicates were set up in each treatment. OCRs increased with increased water temperatures under all photoperiod conditions (P<0.001). Mean OCRs at 7, 10, 13 and 16oC ranged from 793.7~1108.4, 1145.7~1570.3, 1352.8~1742.5 and 1458.2~1818.6 mg $O_2$ $kg^{-1}$ $h^{-1}$, respectively. Under all water temperature conditions except $7^{\circ}C$ (P<0.001), mean OCRs of G. macrocephalus were the highest in continuous light (24L:0D) followed by 12L:12D and 0L:24D photoperiods. Mean OCRs of fish exposed to the 12L:12D photoperiod were significantly higher during the light phase than during the dark phase under all temperature conditions (P<0.001). $Q_{10}$ values ranged from 3.19~5.13 between 7 and $10^{\circ}C$, 1.41~1.74 between 10 and $13^{\circ}C$ and 1.15~1.35 between 13 and $16^{\circ}C$, respectively. Based on overall results, water temperature, photoperiod and their combinations exerted a significant influence on the metabolic rate of juvenile cod. This study provides empirical data for estimating the amount of oxygen demand and managing the culture of cod under the given water temperatures and photoperiods.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2018년도 추계학술대회
• /
• pp.241-247
• /
• 2018

Deep-sea fishing vessel No. 501 Oryong was fully flooded through its openings and sunk to the bottom of the sea due to the very rough sea weather on the way of evasion after a fishing operation in the Bearing Sea. As a result, many crew members died and/or were missing. In this study, a full-scale ship flooding and sinking simulation was conducted, and the sinking process was analyzed for the precise and scientific investigation of the sinking accident using a highly advanced Modeling & Simulation (M&S) system of the Fluid-Structure Interaction (FSI) analysis technique. To objectively secure the weather and sea states during the sinking accident in the Bering Sea, time-based wind and wave simulation at the region of the sinking accident was conducted and analyzed, and the weather and sea states were realized by simulating the irregular strong wave and wind spectrums. Simulation scenarios were developed and full-scale ship and fluid (air & seawater) modeling was performed for the flooding sinking simulation, by investigating the hull form, structural arrangement & weight distribution, and exterior inflow openings and interior flooding paths through its drawings, and by estimating the main tank capacities and their loading status. It was confirmed that the flooding and sinking accident was slightly different from a general capsize and sinking accident according to the simple loss of stability.

• 대한토목학회논문집
• /
• 제14권1호
• /
• pp.63-70
• /
• 1994

본 연구에서는 다경간 연속교의 내진해석시 가동받침의 마찰을 고려할 수 있는 비선형 동적해석 방법을 제시하고 가동받침의 마찰계수에 따른 연속교의 내진응답을 고찰하였다. 연구결과 국내와 같은 소규모 설계지진시에는 가동받침의 마찰은 마찰계수가 작더라도 에너지 감쇠에 의한 상부구조의 변위감소와 마찰력에 의한 상부구조의 관성력의 각 하부구조로 분배에있어 상당한 효과가 있음을 알 수 있었다. 또한 이러한 가동받침의 마찰효과는 마찰계수가 클수록, 입력지진의 규모가 작을수록 커짐을 보였다. 따라서 경간수가 많고 상부구조의 중량이 큰 다경간 연속교에 있어서 가동반침의 마찰계수를 적절히 사용함으로써 중소규모 설계지진 작용시 상부구조의 수평변위를 조절할 수 있고 상부구조의 교축방향 관성력을 각 하부구조로 분배하는 효과에 의해 경제성과 전체교량의 내진 안전성을 확보할 수 있다.

• 한국안전학회지
• /
• 제31권4호
• /
• pp.55-63
• /
• 2016

A dust explosion is a phenomenon of strong blast wave propagation involving destruction which results from dust pyrolysis and rapid oxidation in a confined space. There has been some research done to find individual explosion characteristics and common physical laws for various dust types. However, there has been insufficient number of studies related to the heat of combustion of materials and the oxygen consumption energy about materials in respect of dust explosion characteristics. The present study focuses on the relationship between dust explosion characteristics of wood dust samples and oxygen consumption energy. Since it is difficult to estimate the weight of suspended dust participating in explosions in dust explosion and mixtures are in fuel-rich conditions concentrations with equivalent ratios exceeding 1, methods for estimating explosion overpressure by applying oxygen consumption energy based on unit volume air at standard atmospheric pressure and temperature are proposed. In this study an oxygen consumption energy model for dust explosion is developed, and by applying this model to TNT equivalent model, initial explosion efficiency was calculated by comparing the results of standardized dust explosion experiments.

• 전력전자학회논문지
• /
• 제14권6호
• /
• pp.457-465
• /
• 2009

리튬계열 전지는 다른 이차전지에 비해 평균전압 및 에너지 밀도가 높으며 가볍고 수명이 긴 장점으로 인해 휴대용 전자기기에 폭넓게 사용되고 있으며, 특히 전기 자동차용으로 높은 수요가 예측되고 있다. 전기 자동차용 리튬 전지의 경우 운행 가능 거리의 정확한 계산이 요구되며, 또한 크랭킹이 불가능한 상태로 방전이 되지 않아야 하므로 충전상태에 대한 정확한 정보는 신뢰성 있는 운전을 위한 필수적인 요소가 된다. 본 논문에서는 AC 임피던스를 이용하여 리튬 폴리머 전지의 충전상태(SOC: State of Charge)를 추정하는 새로운 방법에 관해 제안한다. 제안된 방법에서는 주파수 별로 측정된 임피던스를 등가 임피던스 모델에 커브 피팅하여 파라미터를 추출하고, 추출된 파라미터를 이용하여 충전상태를 추정하였다. 제안된 방법에 의해 추출된 파라미터를 통해 리튬전지의 SOC 추정이 가능함을 증명하였고, 다수의 제조사에서 제작된 비슷한 용량의 리튬 폴리머 전지를 대상으로 한 실험을 통해 제안된 방법의 유용함을 검증하였다.

• 한국산학기술학회논문지
• /
• 제8권4호
• /
• pp.842-847
• /
• 2007

본 연구에서는 설계기준에 제시된 평지 전도 안전율 계산식을 바탕으로 경사지에서의 지반의 저항모멘트를 산정하기 위해 범용 해석 프로그램 L-Pile Plus13.8을 사용하여 기존 연구와 검증하였다. 지반의 일반적인 토질상태별 특성을 고려한 내부마찰각, 점착력, 흙의 단위중량, 지반종류, 사질토 및 점성토 지반계수를 적용하여 각 전주의 근입 깊이에 따른 지반의 저항모멘트를 산정하였다. 또한 토질등급에 따른 토질의 상태별 특성이 고려된 4가지 경우를 선정하여 12m 중하중용 전주를 대상으로 경사지의 경사각을 $0^{\circ}{\sim}35^{\circ}$까지 $5^{\circ}$씩 증가시켜 지반의 저항모멘트를 산정하였다. 그 결과 경사지 경사각에 따른 저항모멘트가 감소하는 것을 확인 할 수 있었으며 그에 따른 경사지의 근입 깊이 증가가 필요한 것으로 판단된다.

• Animal Bioscience
• /
• 제36권8호
• /
• pp.1156-1166
• /
• 2023

Objective: Pork belly is a cut of meat with high worldwide demand. However, although the belly is comprised of multiple muscles and fat, unlike the loin muscle, research on their genetic parameters has yet to focus on a representative cut. To use swine breeding, it is necessary to estimate heritability against pork belly traits. Moreover, estimating genetic correlations is needed to identify genetic relationship among the traditional carcass and meat quality traits. This study sought to estimate the heritability of the carcass, belly, and their component traits, as well as the genetic correlations among them, to confirm whether these traits can be improved. Methods: A total of 543 Yorkshire pigs (406 castrated males and 137 females) from 49 sires and 244 dam were used in this study. To estimate genetic parameters, a total of 12 traits such as lean meat production ability, meat quality and pork belly traits were chosen. The heritabilities were estimated by using genome-wide efficient mixed model association software. The statistical model was selected so that farm, carcass weight, sex, and slaughter season were fixed effects. In addition, its genetic parameters were calculated via MTG2 software. Results: The heritability estimates for the 7th belly slice along the whole plate and its components were low to moderate (0.07±0.07 to 0.33±0.07). Moreover, the genetic correlations among the carcass and belly traits were moderate to high (0.28±0.20 to 0.99±0.31). Particularly, the rectus abdominis muscle exhibited a high absolute genetic correlation with the belly and meat quality (0.73±52 to 0.93±0.43). Conclusion: A moderate to high correlation coefficient was obtained based on the genetic parameters. The belly could be genetically improved to contain a larger proportion of muscle regardless of lean meat production ability.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제8권2호
• /
• pp.634-645
• /
• 2014

VoIP (Voice over Internet Protocol) is a technology of transmitting and receiving voice and data over the Internet network. As the telecommunication industry is moving toward All-IP environment with growth of broadband Internet, the technology is becoming more important. Although the early VoIP services failed to gain popularity because of problems such as low QoS (Quality of Service) and inability to receive calls as the phone number could not be assigned, they are currently established as the alternative service to the conventional wired telephone due to low costs and active marketing by carriers. However, VoIP is vulnerable to eavesdropping and DDoS (Distributed Denial of Service) attack due to its nature of using the Internet. To counter the VoIP security threats efficiently, it is necessary to develop the criterion or the model for estimating the information security level of VoIP service providers. In this study, we developed reasonable security indicators through questionnaire study and statistical approach. To achieve this, we made use of 50 items from VoIP security checklists and verified the suitability and validity of the assessed items through Multiple Regression Analysis (MRA) using SPSS 18.0. As a result, we drew 23 indicators and calculate the weight of each indicators using Analytic Hierarchy Process (AHP). The proposed indicators in this study will provide feasible and reliable data to the individual and enterprise VoIP users as well as the reference data for VoIP service providers to establish the information security policy.

• 한국지반신소재학회논문집
• /
• 제16권3호
• /
• pp.31-39
• /
• 2017

국내 해성 점성토의 강도증가율 평가시, 흙의 물리적 특성인 소성지수 및 액성한계만을 이용해서 비교적 쉽게 구할 수 있으므로 연약 지반 설계 실무에서 폭넓게 적용되어온 경험식, Skempton(1954, 1957) 및 Hansbo(1957)의 적용성을 분석하였다. Scandinavia 반도지역의 해성 점성토 지반에서 수행된 현장베인시험(FVT) 결과를 이용하여 제안된 두 식은 소성지수와 점토 함유량의 비례관계를 나타내는 국내 지반 조건에서는 적용성이 떨어지므로, 압밀 및 강도 산정을 위한 역학시험을 통해서 강도증가율을 평가하는 것이 적절한 것으로 분석되었다. 일축압축강도 저평가 경향의 인천, 화성 및 군산 저소성 토질의 결과를 제외하면, 소성지수에 관계없이 국내 해성 점성토 지반의 강도증가율은 대략 0.25~0.35 사이에서 분포하는 것으로 나타났다.

• 한국건설관리학회논문집
• /
• 제6권6호
• /
• pp.142-151
• /
• 2005

공공 건설공사에 있어서 발주관청에서 산정한 예정공사기간과 실제 공사기간 사이에 차이가 발생하여 당초 계획했던 프로젝트가 예정준공일보다 지연되는 경우가 빈번하게 발생한다. 이는 공사지연에 따른 시공 중 문제점뿐만 아니라 시설물사용 계획의 차질로 초래되는 물류비용증가, 시민불편가중, 시설물을 이용한 생산 및 공급차질과 이로 인한 각 분야의 막대한 손실 등으로 이어진다. 이러한 손실들을 줄이기 위해서는 발주시 산정하는 예정공사기간의 정확도를 높여야 한다. 본 연구는 발주관청의 예정공사기간 산정시 지표로 활용할 수 있는 공사기간보정요소를 포함하는 예정공사기간 산정모델을 제시하여 적정공사기간을 확보함으로서 시공 중의 공기 연장 빈도를 줄이고 나아가서는 공공 프로젝트의 성공적인 운영에 기여하고자 한다.